Contact Us

TPS70916DBVR

Brand: Texas Instruments
Texas Instruments TPS70916DBVR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS70916DBVR — Power Management & Signal Chain | Superb Automation

TPS70916DBVR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS70916DBVR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS70916DBVR 1.6 V fixed regulator in a five pin SOT-23

The TPS70916DBVR is the 1.6 V member of the TPS709 family in the DBV body, a five pin SOT-23 of 2.9 mm by 1.6 mm. It holds 150 mA from an input between 2.7 V and 30 V, draws 1 microamp of quiescent current and 150 nA in shutdown, and is 2 percent accurate over temperature. The 1.6 V rail is not one of the common logic voltages, which is exactly why it appears in battery products: it is the rail that a small display bias, a sensor bridge or a low power radio wants when 1.8 V is too high and 1.5 V is not enough.

The voltage list in the family runs from 1.2 V to 6.5 V and includes 1.5 V, 1.8 V and 3.3 V, so a buyer comparing a 1.6 V requirement against a catalogue will usually be offered 1.5 V or 1.8 V. The 1.6 V row exists as a published order code, and the addendum prints it alongside the more common voltages, so the choice is available rather than a special.

Protection is the same as the rest of the family: reverse current blocking, a current limit and thermal shutdown. The leaded body changes the thermal path rather than the electrical behaviour, and the SOT-23 is the body to pick when the board is reflowed on a line that has no appetite for a 2 mm WSON with a thin pitch.

Key parameters from the SBVS186H document

Input range2.7 V to 30 V
Output1.6 V fixed on this order code
Output current150 mA rated, 200 mA peak
Quiescent current1 microamp typical
Shutdown current150 nA typical with the enable pin low
Accuracy2 percent over temperature
DropoutOnly specified where the output is 2.8 V or above, so this rail is set by the 2.7 V input floor
ProtectionReverse current, current limit and thermal shutdown
PackageDBV five pin SOT-23, 2.9 mm by 1.6 mm
Order codeTPS70916DBVR, large reel, active in the vendor addendum

Why a 1.6 V rail is not the same as a 1.5 V rail

A 1.6 V rail sits 0.1 V above 1.5 V, which is inside the tolerance band of many loads and outside the specification of a few. A sensor whose bias window is 1.55 V to 1.65 V will not work on 1.5 V, and a radio whose absolute maximum is 1.65 V will not survive 1.8 V. That narrow window is the reason a 1.6 V order code is published at all, and it is also the reason a substitution has to be checked against the load data sheet rather than against the regulator table.

The family has one behaviour that matters more here than on a higher rail: the accuracy is 2 percent over temperature, which on 1.6 V is 32 mV either way. A load that needs 1.6 V plus or minus 20 mV is therefore outside what this part can promise, and the answer is either a tighter regulator or a load that tolerates the band.

Where this part fits

Battery instruments, handheld meters, portable medical devices, wireless sensor nodes and any product with a display or a sensor that wants a rail between the two common logic voltages. The 30 V input also lets it sit on a 12 V or 24 V line without a pre regulator when the current is small, which is common in a mains powered instrument with a low power radio. Notes on swapping between the fixed voltage rows of this family sit under power management cross reference, and the reel and marking checks for the leaded body are in incoming inspection plan.

What to check before a purchase order

Check that the load tolerance is wider than 2 percent. On a 1.6 V rail the regulator band is plus or minus 32 mV, and that figure covers temperature but not the drop across the board trace from the regulator to the load. A load that sits at the edge of its window at the regulator pin can be outside it at the connector.

Check the body against the qualified assembly. The DBV and the DRV versions of this family are the same die in different packages, and a line that has been qualified on the SOT-23 needs a new stencil aperture and a new reflow profile for the WSON. Mixing the two on one bill of materials is a common source of rework on a small board where the two bodies are the only difference between two similar part numbers.

Questions that come up on this part

Is the 1.6 V part a factory special? No. It appears in the vendor addendum as an active large reel row, next to the 1.5 V and 1.8 V rows.

What is the minimum input for a 1.6 V output? 2.7 V, the family floor. The pass device needs far less, but the part is not specified below that input.