Contact Us

TPS659163RGZR

Brand: Texas Instruments
Texas Instruments TPS659163RGZR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS659163RGZR — Power Management & Signal Chain | Superb Automation

TPS659163RGZR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS659163RGZR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS659163RGZR five converter power management IC

The TPS659163RGZR is a power management IC with five step down converters and five low dropout regulators in a 48 pin VQFN, operating from a system voltage of 3.135 V to 5.25 V. Outputs range from 0.7 V to 3.3 V in 10 or 20 mV steps, and two of the converters are rated 3.5 A each with the ability to combine into a 7 A dual phase rail with differential remote sensing of both output and ground. The part consumes 20 microamps in the off state and 90 microamps in sleep with two converters still active.

The regulator set covers one 100 mA LDO capable of low noise performance up to 50 mA and two 200 mA LDOs, with short circuit protection on all of them. A twelve bit sigma delta analogue to digital converter with eight channels, two of them external, monitors the rails and the die temperature, and the thermal block provides a warning before the shutdown.

Power up and power down sequences are configured in OTP, so the order is fixed at the factory and the host only has to assert the enable. The control interface is a high speed I2C bus, and the ambient range on the published rows is minus 40 to 105 degrees.

Key parameters from the SLVSD09C document

System voltage3.135 V to 5.25 V, 3.1 V to 5.2 V in the document title
ConvertersFive, all with 0.7 V to 3.3 V output and 10 or 20 mV steps
High current pairTwo at 3.5 A, combinable into 7 A dual phase with differential remote sense
RegulatorsOne 100 mA low noise LDO, two 200 mA LDOs, short circuit protection throughout
Off state current20 microamps with the part off
Sleep current90 microamps with two converters active
Monitoring12 bit sigma delta converter, eight channels, two external, plus thermal warning and shutdown
SequenceOTP configured power up and power down order
PackageRGZ 48 pin VQFN, 2500 pieces on a large reel, moisture level 3, minus 40 to 105 degrees
Reel noteThe T suffix row for the same body is also printed at 2500 pieces, which is not the usual small reel

Ninety microamps in sleep is the number that matters

A product that spends its life in a sleep state with two rails alive is limited by what the supply draws in that state, not by what it draws at full load. Ninety microamps with two converters switching is a figure that lets a battery product keep its memory and its real time clock alive for months, and the 20 microamp off state is what the same product draws when the switch is off.

Those two numbers are also what makes the part unsuitable for a rail that has to deliver current in sleep: two active converters at 3.5 A and 3.5 A are not the same pair the sleep state assumes, so the sleep configuration has to be checked against the actual rail list rather than assumed.

Where this part fits

Portable instruments, industrial controllers, single board computers and battery products that need five rails with a fixed sequence and a very low sleep current. Notes for this class sit under power management cross reference and safety stock planning.

What to check before a purchase order

Check the OTP image inside the order code. It sets which rails are alive in sleep, which rail is sequenced first, and the default voltages. The addendum prints the image beside the row as a short string rather than in words.

Check the reel size on the same row. The T suffix for this body is printed at 2500 pieces as well, so the letter does not separate a small reel from a large one on this family. The incoming check is in incoming inspection plan.

Questions that come up on this part

Do the two 3.5 A converters have to be combined? No, they can run as two independent rails, and the dual phase arrangement is only used when one rail needs 7 A.

Is the 105 degree ambient rating the junction rating? No, it is the ambient on the published rows, and the junction limit is higher, so the thermal pad still has to be sized for the loss at that ambient.

One more point about the sleep state. The 90 microamp figure assumes two converters remain active, and which two is set by the OTP image rather than by the host at run time. A product that needs a different pair alive in sleep needs a different image, which is a purchasing decision made before the first build rather than a register write on the line.

The differential remote sense on the combined rail measures at the load rather than at the part, which is what keeps a 7 A core rail inside its window at the far end of the plane.