TPS6591133A2NMA
Product Specifications
TPS6591133A2NMA
Texas Instruments — Power Management & Signal Chain
Product Overview
The TPS6591133A2NMA from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
TPS6591133A2NMA integrated power management unit with an EEPROM controller
The TPS6591133A2NMA is a power management unit for a processor product: two step down converters for the processor cores, one step down converter for the input output rail, one controller for external field effect transistors, eight low dropout regulators plus a real time clock regulator, and an embedded power controller with EEPROM programmability. The body is a 98 pin nFBGA.
The external transistor controller is what separates this part from a fixed rail PMIC. A rail that needs more current than an integrated converter can deliver is built from an external pair of transistors driven by this controller, which keeps the sequencing, the voltage scaling and the supervision inside the PMIC while the current capability moves outside it. That is how a board with a 10 A or 15 A core rail still gets a single sequence and a single register map.
Nine configurable general purpose pins carry the rest of the system: four can act as enables for external resources and are included in the power up sequence, two can sink 10 mA to drive a light emitting diode, and all of them can generate a maskable interrupt for a wake up. Two reset inputs allow a system reset and a warm reset to be separated.
Key parameters from the SWCS049S document
| Converters | Two step down for the processor cores and one for the input output rail, all integrated |
| External rail | One controller for external field effect transistors, sequenced like an internal rail |
| Voltage scaling | Dynamic voltage scaling on the core rails through a dedicated bus |
| Regulators | Eight LDOs plus a real time clock LDO |
| Controller | Embedded power controller with EEPROM programmability for sequence and defaults |
| General purpose pins | Nine, four usable as sequenced enables, two with a 10 mA sink for indicators |
| Reset | Two reset inputs, one for the system and one for a warm reset |
| Switching sync | External 3 MHz clock synchronisation for the converters |
| Package | NMA 98 pin nFBGA, moisture level 3 with a 168 hour floor life |
| Order note | The addendum prints call TI in the quantity column for this code and carries obsolete rows for another body in the same table |
The addendum for this family is a mixed table
The orderable table prints active rows in the NMA body alongside obsolete rows for a different body, a JUNIOR package, in the same list. A buying desk that scans the table for the code and reads the next column can pick up a status from the wrong row. The quantity column for this code reads call TI rather than a reel size, which means the quantity has to be confirmed with the vendor or the distributor before a schedule is promised to a customer.
The body itself is a 98 pin array, tray packed on some rows and reel packed on others, so the packing has to be named on the order as well as the quantity.
Where this part fits
Processor boards with a high current core rail, industrial computers, medical instruments and any product that needs a sequenced rail list with an external high current stage. Notes for this class are filed under power management cross reference and component lead time solutions.
What to check before a purchase order
Check the status and the quantity on the same row. The table mixes active and obsolete bodies, and the quantity for this code reads call TI, so both fields have to be read from one line.
Check the external transistor stage against the controller. The gate drive is set for a particular class of device, and a pair of transistors with too much gate charge will slow the switching enough to change the ripple and the thermal behaviour of the rail. The incoming check is in incoming inspection plan.
Questions that come up on this part
Does the external stage count as one of the sequences rails? Yes, the controller is part of the power up order, so the external rail is brought up in the same sequence as the internal ones.
Can the EEPROM be reprogrammed in the field? The vendor supports it through the bus, and the same caution applies as on any programmable part: the change takes effect at the next power cycle rather than immediately.
One more point on the external stage. The controller drives the gates of the external pair and supervises the resulting rail, so the current sense point, the gate resistors and the compensation belong to the controller rather than to the transistor pair. A board that changes the transistors without rechecking those three items will pass a light load test and fail at the current the rail was specified for.
The EEPROM also holds the default rail voltages, so a board that moves a rail inside its range needs a configuration change rather than a change of the divider resistors.