Contact Us

TPS63805YFFR

Brand: Texas Instruments
Texas Instruments TPS63805YFFR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS63805YFFR — Power Management & Signal Chain | Superb Automation

TPS63805YFFR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS63805YFFR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS63805YFFR 2 A buck-boost converter in a 15 ball WCSP

The TPS63805YFFR is the smallest solution member of the TPS6380x family, a non inverting buck-boost converter that runs from 1.3 V to 5.5 V and holds an adjustable output between 1.8 V and 5.2 V. It delivers 2 A of output current from a 2.3 V input at a 3.3 V output, which is the number to quote for a single cell lithium product that has to keep a 3.3 V rail alive down to the last of its charge. The body is a 15 ball WCSP of 2.3 mm by 1.4 mm on a 0.4 mm pitch, and the vendor states a solution area of 18.5 square millimetres with a 22 microfarad minimum output capacitor.

The family has three members on one die and one pinout: TPS63805, TPS63806 and TPS63807. They differ in what the control loop is tuned for and in the quiescent current. The TPS63805 and the TPS63807 draw 11 microamps into VIN when not switching, the TPS63806 draws 13 microamps, and the TPS63807 adds an output discharge path that pulls the rail down when the enable pin is low. The TPS63806 is the member tuned for load steps and is quoted at 180 mV of deviation for a 2 A step, with a 2.5 A transient rating.

Operation is a peak current buck-boost with defined transition points between buck, buck-boost and boost, so the rail does not chatter between modes when the battery voltage passes close to the output voltage. A 480 microsecond ramp limits the inrush at start-up, and the converter starts into a pre-biased output without a discharge pulse.

Key parameters from the SLVSDS9E document

Input range1.3 V to 5.5 V operating, above 1.8 V for a clean start-up
Output range1.8 V to 5.2 V adjustable through the FB divider
Output current2 A at VIN 2.3 V and VOUT 3.3 V, 2.5 A transient on the TPS63806
Quiescent current11 microamps on the TPS63805 and TPS63807, 13 microamps on the TPS63806
Shutdown current45 nA typical and 600 nA maximum into VIN with the enable low
Switch resistance47 and 30 milliohm on one leg, 43 and 18 milliohm on the other, at 3 V input
Switching frequency2.1 MHz at 2.3 V input, 1.4 MHz at 3.3 V, 1.6 MHz at 4.3 V
Peak current limit5 A on the TPS63805 and TPS63807, 5.5 A on the TPS63806, at VIN 2.5 V
Undervoltage lockout1.20 V to 1.29 V rising, 1.25 V typical
Soft start224 microseconds ramp and 321 microseconds from the enable edge to a rising output
PackageYFF 15 ball WCSP, 2.3 mm by 1.4 mm, moisture level 1, minus 40 to 125 degrees

What the three order options actually change

The three parts share one document, one footprint and one marking family, so a reel bought by family name can deliver the wrong behaviour on a board that depends on a specific one. The TPS63805 is the default choice for a small solution with low standby current. The TPS63806 costs a little standby current and buys load step response, which matters when the load is a camera sensor or a radio that switches between sleep and transmit. The TPS63807 behaves like the TPS63805 and adds the discharge switch, which is what a product needs when the rail must fall quickly at shutdown so the next block does not see a decaying supply.

All three samples start at 2 A at 2.3 V input, so the current rating does not separate them. What separates them on a purchase order is the last letter of the family name, and that letter is printed on the reel label and in the marking, not in the catalogue family line.

Where this part fits

Portable instruments, handheld radios, telematics units, sensor nodes and any single cell product that has to hold a 3.3 V or 3.6 V rail while the cell falls from 4.2 V to 2.5 V. The boost side of the same converter also covers a 5 V rail from a 3.7 V cell at lower current, which is useful when a board carries one converter for both directions. Our desk keeps the substitution notes for this family under power management cross reference.

What to check before a purchase order

Check the switch resistance against the actual load rather than against the 2 A headline. At 3 V input and 3.3 V output the converter is close to unity conversion ratio, so both legs conduct for part of the cycle and the conduction loss is the sum of the two, not one. A board that runs at 1 A rms sees roughly 60 milliwatts of conduction loss in the switches alone.

Check the inductor saturation against the 5 A peak current limit, not against the 2 A output. During a load step the peak limit is what the loop reaches, and an inductor that saturates below it turns a transient into a current spike that trips the protection. The receipt check for the reel and the marking sits in incoming inspection plan.

Questions that come up on this part

Can it be used below 1.8 V input? It runs, but the vendor specifies start-up above 1.8 V, so a product that begins life on a nearly empty cell has to be started from a higher rail or pre charged. Once running, the converter keeps regulating down to the 1.2 V to 1.29 V lockout window.

What happens above 5 V output? The output range stops at 5.2 V and the protection window on the output sits between 5.5 V and 5.9 V, so a 5.5 V rail is outside the specified range even though the protection would not yet act. A 5 V rail is the practical top of the usable span.