TMS470R1A288PGETR
Product Specifications
TMS470R1A288PGETR
Texas Instruments — Power Management & Signal Chain
Product Overview
The TMS470R1A288PGETR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
TMS470R1A288PGETR: 288K byte ARM7TDMI flash microcontroller, 144 pin body, T grade, tape and reel
TMS470R1A288PGETR is the reel packed version of the T grade 288K byte device, for automated placement lines that load from tape rather than trays in a LQFP body of 144 pins. The trailing R marks the tape and reel packing on the T grade part. Everything else matches the tray version: ARM7TDMI core at 24 MHz with a 48 MHz pipeline mode, 288K bytes of flash in two banks of eight sectors, 16K bytes of SRAM, two SCC CAN controllers, three I2C modules, a twelve channel HET lite, a ten bit twelve channel ADC and the 42 pin expansion bus on the 144 pin body, specified from minus 40 to 105 C.
Order code and package
| Order code | TMS470R1A288PGETR |
| Packing | tape and reel, R suffix |
| Core | ARM7TDMI, 24 MHz, 48 MHz pipeline |
| Package | LQFP, 144 pins |
| Flash | 288K bytes, two banks of eight sectors |
| SRAM | 16K bytes |
| CAN | two SCC controllers |
| High end timer | HET lite, 12 channels |
| ADC | 10 bit, 12 channels |
| Expansion bus | 42 pins |
| Temperature | minus 40 to 105 C, T grade |
| Datasheet | SPNS106B, revised August 2006 |
Electrical parameters that decide the application
| Packing suffix | R, tape and reel |
| Reel quantity | per the TI packaging data for this body |
| Moisture | dry pack, bake if the seal is broken |
| Flash endurance | 50 000 cycles |
| Flash banks | two, read while write across banks |
| DMA | 16 channels |
| I2C | three modules |
| Memory security | MSM readout protection |
| Watchdogs | digital and analog |
| Clock module | zero pin PLL |
| Core supply | 1.8 V nominal, 3.3 V I/O |
| Grade | T, minus 40 to 105 C |
Points to check before this part goes on a BOM
Reel packing is not a price detail on a volume build, it is a line decision. A 144 pin LQFP in trays needs a manual or semi automatic step at the placement machine, while the reel feeds the same machine as the rest of the board. On a run of a few thousand units the labour difference is larger than the price difference between the two codes.
The R suffix changes nothing inside the package. Same die, same T grade, same 288K bytes of flash, same two CAN controllers. That matters when a BOM is being cleaned up: the tray and reel codes are interchangeable electrically and mixing them on one BOM line is a purchasing error, not an engineering one.
Reels are moisture sensitive. The seal has a date and a humidity indicator, and a reel that has been open beyond the floor life needs a bake before reflow. On a 144 pin body with fine pitch leads a skipped bake shows up as delamination and lifted leads after the second reflow, not on the first.
The two bank flash is the feature that decides whether this part can take an update in the field. With the application running from one bank, the other can be erased and programmed, so a gateway keeps its CAN networks up through the update instead of dropping them for the length of the erase.
The memory security module protects the code against readout, and a locked device cannot be copied on the bench. For a contract build that means the programming file and the lock setting belong in the build package, not with the customer, or a repair six months later has no way to produce a working part.
The 42 pin expansion bus and the analogue channels share pins, and the reel version is the one that goes into volume. A pin mux conflict that was resolved by hand wiring on two prototypes becomes a re-spin at volume, so the mux table should be checked against the final peripheral list before the first reel is ordered.
Reel quantity and the moisture label are the two things to check on receipt. A reel that has been re-labelled, or whose seal date does not match the lot, is the first sign of a part that has come through another channel. On a 144 pin LQFP the damage from a second bake and a second reflow is not visible until the leads lift.
Two banks of eight sectors is not the whole story on the 288K byte device, because the sector map decides where the loader sits. A reel packed lot goes straight to the line, so the programming step is planned at the fixture, and the bank split should match the update scheme the firmware uses rather than the one that was convenient on the prototype.
Where this order code fits
Production runs on an automated placement line, contract builds that specify reel packing for the whole bill of materials, and any board that has to be built in volume with a single moisture and packing standard across the line. Boards comparing it with a neighbouring part start from our MCU Cross Reference page, and boards replacing a part that has gone end of life start from the Incoming Inspection Plan page.
Questions buyers ask
Is the reel version electrically different? No. The R marks tape and reel packing. The die, the temperature grade, the flash map and the peripherals are identical to the tray code, and the two can be mixed on a board without any firmware change.
How many parts are on a reel? It follows the TI packaging data for this body and grade, and the quantity is stated on the reel label. We quote against the reel quantity rather than a loose count, so the offer matches what the line consumes.
Does the reel need special storage? It is dry packed and moisture sensitive. Keep the seal intact until the line needs it, record the date the seal is broken, and bake before reflow if the floor life is exceeded.
SUPERB holds and sources this Texas Instruments line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a line is moving, the Component Lead Time Solutions page sets out the checks that keep a substitute from failing on the bench.