Contact Us

TMS320F28379DZWTS

Brand: Texas Instruments
Texas Instruments TMS320F28379DZWTS is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TMS320F28379DZWTS — Power Management & Signal Chain | Superb Automation

TMS320F28379DZWTS

Texas Instruments — Power Management & Signal Chain

Product Overview

The TMS320F28379DZWTS from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TMS320F28379DZWTS: dual core 200 MHz C2000 with configurable logic tiles in a 337-ball BGA

TMS320F28379DZWTS is the top member of the dual core generation, with logic tiles on chip in a NFBGA body of 337 pins. It is the F28379D: the dual core device with 1MB of flash, 204KB of RAM and four configurable logic tiles that can absorb small glue logic functions. The ZWTS order code is the 337-ball BGA in the S grade at minus 40 to plus 125 degrees ambient.

Order code and package

Order codeTMS320F28379DZWTS
Package337-ball nFBGA, ZWT body, 0.8 mm ball pitch
Packingtray or reel according to the addendum line
Corestwo C28x at 200 MHz, each with a floating point unit
Acceleratorstwo control law accelerators
Memory1MB of flash as 512K words, 204KB of RAM as 102K words
GradeS, minus 40 to plus 125 degrees ambient

Electrical parameters that decide the application

ADCfour 16-bit converters at 1.1 MSPS each, 12-bit at 3.5 MSPS
PWM24 ePWM channels with 16 high resolution channels
Logic tilesfour configurable tiles with look up tables and flip flops
Serialfour SCI, two SPI, two I2C, three CAN, two McBSP
Other portsUSB and a parallel interface
Supply3.3 V input and output with a 1.2 V core
Securityone code security module per core

Family variants and how they differ

F28379Ddual core, 1MB flash, four logic tiles, the part on this page
F28377Ddual core, 1MB flash, no logic tiles
F28378Ddual core with a reduced peripheral set
F28376Ddual core with 512KB of flash

Points to check before this part goes on a BOM

The four configurable logic tiles are the feature that separates this device number from the F28377D. Each tile has a small number of look up tables and flip flops and can implement a quadrature decoder, a custom PWM interlock or a serial frame detector without an external device. They are not a FPGA and cannot hold a large state machine.

The logic tiles are programmed from the same tool chain as the cores, which means the verification of that logic sits inside the firmware release rather than in a separate hardware description flow. For a safety review that is easier to document, and for a product team it removes a part number from the bill of materials.

Two cores mean two watches, two interrupt controllers and two security modules. A product that runs a control loop on one core and communications on the other has to handle the case where one core resets while the other keeps running, and the message RAM protocol between them is where that shows up first.

1MB of flash as 512K words is split per core, and 204KB of RAM is split between dedicated, local shared, global shared and message regions. Placing a buffer in the wrong region costs arbitration cycles, and the effect appears as jitter in a loop that was measured as comfortable on paper.

The S grade covers minus 40 to plus 125 degrees ambient without the automotive qualification of the Q grade. That distinction matters for a product that sells into industrial cabinets: the S grade is enough electrically, and the Q grade adds the qualification and change notification flow that a vehicle programme requires.

A 337-ball 0.8 mm BGA at 125 degrees is a board level thermal question as much as a device question. The balls carry the heat into the board, and the copper planes under the device decide the junction temperature. A product that calculates the junction from the ambient and the data sheet thermal resistance without the board copper is calculating a number that does not describe the assembly.

Four 16-bit converters with independent sample and hold let two control loops run at the same instant on one device. That is the point of the dual core part in a dual axis drive: each core owns its own converter, its own PWM set and its own current sense, and the two loops do not share a sampling instant.

Supply is the practical risk on this generation. It is a current device, but it is the largest package in the family and it goes into programmes with long qualification cycles, so allocation can tighten without notice. An alternative device number with fewer logic tiles or less memory should be qualified as a second source while the board is still being developed rather than after the first shortage.

The configurable logic tiles hold look up tables and flip flops and are programmed from the same project as the firmware. That means a glue logic change ships with a firmware release, which is convenient, and it also means the logic has to be covered by the firmware test plan rather than treated as fixed hardware.

Two cores with their own converters and PWM sets are what make a dual axis drive possible on one device. The two loops do not share a sampling instant and do not share an interrupt priority, so a fault on one axis does not delay the other, which is the property an OEM machine builder asks for first.

The 204KB of RAM is split into regions with different ownership, and a buffer placed in the global shared region costs arbitration cycles on every access. Moving one array from shared to local memory can change the loop timing of both cores, so the memory map is part of the performance work rather than an afterthought at link time.

The S grade covers 125 degrees ambient without the automotive qualification of the Q grade. For an industrial cabinet that is the right trade: the electrical range is enough and the qualification paperwork that a vehicle programme needs is not required. Mixing the two grades in one product family is a documentation problem, not an electrical one.

The logic tiles can implement a serial frame detector that wakes a core from idle on a specific pattern, which is how a product keeps a communication path live at low power. That is a small function with a large effect on standby current, and it is the kind of thing that is easier to do inside the device than with an external part. The honest way to size the thermal question is to measure the junction with the product running its worst case load at the top of the ambient range, because a calculation from the package figure alone leaves out the copper, the airflow and the neighbouring heat sources that decide the real number. A measurement at one operating point is not enough either, because the worst case is usually a combination of high ambient, full clock and a heavy switching load on the neighbouring circuits.

Where this order code fits

It is used in dual axis servo drives, multi phase power converters, robotics controllers and grid equipment that needs logic and control on one device. Teams comparing it with a neighbouring part start from our MCU Cross Reference page, and teams replacing a part that has gone end of life start from the One Stop BOM Sourcing page.

Questions buyers ask

What are the logic tiles for? Small glue logic: decoders, interlocks, frame detectors and custom timers. They are not a FPGA and cannot replace one.

Is it automotive qualified? The S grade in this order code is not. The Q grade of the same device number is the AEC-Q100 version and is a different line item.

How much RAM? 204KB as 102K by 16 bit words, split into regions that the two cores share in defined ways.

Does it need both cores? The silicon runs with one core active, but the second flash bank, watchdog and security module still need configuration. If only one core is ever used, the F28377S is the cheaper device number.

SUPERB holds and sources this line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a part is moving, the Component Lead Time Solutions page sets out the checks that keep a substitute from failing on the bench.