TMS320F28075PTPT
Product Specifications
TMS320F28075PTPT
Texas Instruments — Power Management & Signal Chain
Product Overview
The TMS320F28075PTPT from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
TMS320F28075PTPT one hundred and twenty megahertz real time controller with three analog converters
The TMS320F28075PTPT is the 176 pin member of the F2807x family, a real time controller built on the C28x core at 120 MHz with a floating point unit, a trigonometric math unit and a control law accelerator at the same clock. It carries 512 KB of error corrected flash and 100 KB of RAM, three 12 bit converters that convert at 3.1 MSPS each, eight windowed comparators, three 12 bit digital to analog outputs and eight sigma delta filter modules.
The part sits between the small single rail controllers and the large F2837x devices. It has enough analog channels and enough sigma delta inputs to run a multi phase power stage with isolated current sensing, and it has a USB port with the physical layer inside the package, two CAN controllers and three SPI ports. For a buyer, the useful summary is that this is the device to choose when the analog count is high but the program does not need the memory or the second core of the larger family.
Key parameters taken from the TMS320F28075PTPT document
| Core | C28x at 120 MHz with a single precision floating point unit, trigonometric math unit and VCU |
| Co processor | control law accelerator at 120 MHz, runs floating point code independently of the CPU |
| Flash | 512 KB, error correction code protected |
| RAM | 100 KB, error correction code or parity protected |
| Analog | three 12 bit converters at 3.1 MSPS each, up to 9.3 MSPS system throughput |
| Comparators and references | eight windowed comparator subsystems with 12 bit references, three 12 bit buffered outputs |
| Isolated sensing | up to eight sigma delta filter modules |
| PWM | 24 channels with enhanced features, 16 of them high resolution on the 176 pin body |
| Capture and position | six enhanced capture modules, three enhanced quadrature encoder modules |
| Serial | USB 2.0 with MAC and PHY, two CAN, three SPI at up to 30 MHz, SCI channels, I2C |
| Memory interface | external memory interface with ASRAM and SDRAM support |
| Order code facts | TMS320F28075PTPT, HLQFP PTP 176 pins, tray of 40, MSL Level-3-260C-168HR, minus 40 to plus 105 C, Active |
The table above is read from the vendor document, not from a distributor summary. Where a window is printed, the window is what a production test should use, and the typical value is only a starting point for the first article.
Where the numbers matter in a real build
The three converters are the reason this device exists in the family. Three independent 12 bit converters at 3.1 MSPS allow a three phase drive to sample all three currents at the same instant, which removes the phase error that a multiplexed converter introduces. The windowed comparators sit on the same pins and can trip the PWM directly in hardware, so an over current is handled in tens of nanoseconds rather than in an interrupt routine. On a motor drive that difference is the difference between a protected stage and a blown one.
The sigma delta filter modules are easy to overlook and hard to add later. They take a bit stream from an isolated modulator and produce a filtered sample in hardware, which is how a drive measures current across an isolation barrier without an analog isolation amplifier. A program that plans to do the same filtering in software will run out of CPU time at 120 MHz, and the module count of eight is what limits how many isolated channels the board can carry.
The internal regulator changes the power tree. The device runs from 3.3 V input output with an internal regulator for the 1.2 V core, so a single 3.3 V rail can supply it. The regulator dissipates, so the exposed pad has to be soldered to a plane with vias, and the 176 pin body carries 40 parts per tray which means the thermal path is decided by the board, not by the package alone.
The temperature suffix matters here as much as anywhere in the family. The T suffix on this code is minus 40 to plus 105 C junction, and the same body and pinout is offered at a higher grade under a different suffix. A product that runs a 120 MHz core inside a sealed enclosure will approach the junction limit, so the grade has to be chosen from a measured case temperature, not from a datasheet assumption.
The USB port with an integrated physical layer is a genuine saving on a control board that has to be configured or logged from a laptop. It removes the external transceiver and its crystal, and it leaves the two CAN ports free for the machine bus. The catch is that the USB pins are shared with other functions, so the pin plan has to be fixed before the netlist is drawn, which is the same lesson as on every device in this family.
- The 24 PWM channels and 16 high resolution channels on this body allow two three phase drives plus a power factor stage, with high resolution on the phases that need it.
- Three 12 bit buffered outputs can drive a reference or a bias without an external converter, which is useful in a calibrated sensor front end.
- The eight sigma delta modules pair with isolated modulators for current sensing in a drive that has to meet a creepage requirement.
- The external memory interface allows a trace buffer or a parameter log to sit outside the device when the 100 KB of RAM is not enough.
- The 40 piece tray is the published packing, and moisture level 3 with a 168 hour floor life sets the limit on how long a tray can stay open on the line.
Two more measurements belong in the first article report: the three converters sampling one source at the same instant, and the comparator trip path with the PWM outputs disabled in hardware. Both are measurements rather than review items, and each has a window in the vendor document to compare against. Add the inner regulator temperature at full load inside the target enclosure, because that reading decides the usable ambient range for the product.
Which projects this part fits
Multi axis servo drives, three phase inverters with a power factor front end, solar and storage converters, charger modules, uninterruptible supplies, robot joint controllers and industrial pump drives are the natural applications. The part also fits instrument front ends that need several simultaneous analog channels and a hardware trip path. Our MCU cross reference lists what we hold against this family, and the component lead time solutions page covers what to do when the lead time runs past the build plan.
Questions that come up before a purchase order is released
What is the difference between this and the F28377S?
The F2807x family has three converters and one core, while the F2837xS family has four converters, more RAM and a second external memory interface. The pinout and the 176 pin body are shared, so a board can be laid out for both, but the memory map and the peripheral count differ and the firmware has to be rebuilt.
Can the device run from a single 3.3 V rail?
Yes, the internal regulator generates the 1.2 V core from the 3.3 V input. The regulator dissipates, so the pad connection and the copper around it decide the usable ambient temperature, and a board that treats the pad as optional will fail a soak test.
How many isolated current channels can the board carry?
Eight sigma delta filter modules set the hardware limit, and each isolated modulator uses one. A three phase drive with two current channels per phase plus a direct current link channel fits inside that count with two modules to spare.
How SUPERB handles this line
We supply the TMS320F28075PTPT in original trays with date code and lot traceability, and we can hold a buffer against a build schedule that spans a quarter. If the analog count is the open question, send the channel list and the isolation requirement and we will confirm whether this body covers it or whether the four converter family is needed. Start from the incoming inspection plan page for the receiving checks on a tray based part.