Contact Us

TMS320F28062PFPQR

Brand: Texas Instruments
Texas Instruments TMS320F28062PFPQR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TMS320F28062PFPQR — Power Management & Signal Chain | Superb Automation

TMS320F28062PFPQR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TMS320F28062PFPQR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TMS320F28062PFPQR: 90 MHz C2000 with 128K flash in an 80-pin HTQFP on a large reel

TMS320F28062PFPQR is a 32-bit real time control microcontroller with a floating point unit and accelerator in a HTQFP body of 80 pins. It is the 90 MHz member of the Piccolo family with 128K by 16 of flash and 50K by 16 of SARAM, in the thermally enhanced 80-pin HTQFP. The PFPQR order code is the PFP body with the R suffix for a 1000 piece large reel and the Q grade at minus 40 to plus 125 degrees.

Order code and package

Order codeTMS320F28062PFPQR
Package80-pin HTQFP, PFP body with exposed pad
Packing1000 piece large tape and reel, R suffix
Core32-bit C28x at 90 MHz, 11.11 ns instruction cycle
Acceleratorcontrol law accelerator at 90 MHz
Memory128K by 16 flash, 50K by 16 SARAM
Temperatureminus 40 to plus 125 degrees Celsius on the Q grade

Electrical parameters that decide the application

ADC12-bit, up to 16 channels, with two sample and hold circuits
PWMePWM with high resolution mode and trip zones
SerialSCI, SPI, I2C, LIN, eCAN, and a USB or McBSP option by device number
Supplysingle 3.3 V rail with an internal regulator
Code security128-bit key over flash, SARAM and OTP
Flash wait statespipeline mode hides part of the flash access time at 90 MHz
Package thermalexposed pad, so the board copper is the heat path

Family variants and how they differ

F28062128K flash and 50K SARAM, the part on this page
F28063128K flash with a different peripheral mix
F28064128K flash and 50K SARAM with USB
F28069256K flash and 100K SARAM, the top of the family

Points to check before this part goes on a BOM

The R suffix is a packing field, not a device field: it means a 1000 piece large reel rather than the 96 piece JEDEC tray of the PFPQ code. A purchasing list that swaps PFPQ for PFPQR gets the same silicon in a different package of parts, which is fine for an automated line and awkward for a prototype bench that expected a tray.

HTQFP means a quad flat pack with an exposed pad. The pad is the thermal path and it also sets the assembly rule: it has to be soldered to a copper area with vias underneath, not left floating, or the part runs hotter than the data sheet assumes and the analogue performance drifts. Reflow profile and stencil aperture for that pad are part of the assembly data, not an afterthought.

At 90 MHz the instruction cycle is 11.11 ns, and flash access needs wait states at that rate. The family provides a flash pipeline mode that hides part of that latency, and the setting is a build decision that affects timing of any loop that runs from flash rather than from RAM. Code that was tuned on a 60 MHz part does not automatically meet the same loop time here.

The Q grade covers minus 40 to plus 125 degrees ambient, which is the automotive and industrial top end, while the same device number in other suffixes stops at 105 degrees. The grade is printed in the orderable description and marked on the reel label, so a received lot can be checked without opening it, and that check is worth doing when the supplier is not the original channel.

128K by 16 flash is 256 kilobytes of program space and 50K by 16 SARAM is 100 kilobytes of RAM. That is enough for a field oriented motor control loop plus a CANopen stack, and it is the reason this device number is common in drives. A product that adds a bootloader, a calibration table and a logging buffer should measure the actual image size rather than budget from the family headline.

The exposed pad and the 0.5 mm lead pitch make this body harder to rework than the LQFP version of the same die. Repair benches that expect to lift and refit a device should know that the pad has to be reflowed from below or with hot air, and that a lifted pad usually takes the copper with it.

Flash endurance in the family data sheet is a per sector figure, so a product that writes calibration data into the same sector on every power down will reach the limit long before the 15 year life of the equipment. Moving the data to a separate sector, or to external memory, is a firmware decision that has to be made early because the sector map is fixed.

The device number determines which serial peripherals exist, and the letters after the family name are the only guide. Two parts in this family that look identical in the comparison table can differ in USB or McBSP availability, so a substitution between device numbers has to be checked against the peripheral table rather than against the pin count.

The comparators inside the family feed the PWM trip inputs directly, so an overcurrent event turns the outputs off in the same cycle without a firmware interrupt. Products that route that through software add latency that the bridge may not survive, and the hardware path costs nothing but a register write and a test.

Clock generation is internal with a phase locked loop, and the loop filter components are external on this generation. A clock that is off by a fraction of a percent moves the CAN bit rate and the serial baud rate outside tolerance, and the failure appears as intermittent communication errors rather than as a dead board.

The 80-pin body exposes the full analogue input set, and the exposed pad sits under the die. A stencil aperture that is too small leaves voids under that pad, and a void is a thermal resistance in series with the only heat path. The assembly drawing should specify the aperture rather than leave it to the paste layer defaults.

The family includes a DMA engine that moves converter results into RAM without core intervention, which is how a product keeps a sample history for a control loop and a diagnostic trace at the same time. Without it, every result costs an interrupt and the loop time grows with the number of channels. The comparison table in the family data sheet is the document to quote from when a substitution is proposed, because two device numbers with the same pin count and the same memory can still differ in the serial ports they bring out, and that difference does not appear on a distributor page.

Where this order code fits

It is used in servo drives, appliance inverters, power conversion and automotive pumps where a 90 MHz loop and 128K words of flash are needed at 125 degrees. Teams comparing it with a neighbouring part start from our MCU Cross Reference page, and teams replacing a part that has gone end of life start from the Component Obsolescence Management page.

Questions buyers ask

Is PFPQR the same part as PFPQ? The silicon and the temperature grade are the same. The difference is the packing: PFPQR is a 1000 piece large reel, PFPQ is a tray.

How much flash does it have? 128K by 16 bit words, which is 256 kilobytes. The SARAM is 50K by 16 bit words, 100 kilobytes.

Does it need an external crystal? It has an internal oscillator that is adequate for many control loops, and an external crystal or clock input for products that need an accurate time base or a CAN bit rate within tolerance.

Can it run at 125 degrees without a heatsink? The junction temperature is what matters, and the exposed pad soldered to copper is the only path. The power figure in the family data sheet and the board thermal resistance decide that, not the grade alone.

SUPERB holds and sources this line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a part is moving, the Component Lead Time Solutions page sets out the checks that keep a substitute from failing on the bench.