Contact Us

TMS320C28346ZFETR

Brand: Texas Instruments
Texas Instruments TMS320C28346ZFETR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TMS320C28346ZFETR — Power Management & Signal Chain | Superb Automation

TMS320C28346ZFETR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TMS320C28346ZFETR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TMS320C28346ZFETR Delfino floating point controller at 300 MHz with RAM only memory

The TMS320C28346ZFETR is the 300 MHz member of the C2834x Delfino line, a 32 bit controller with a hardware single precision floating point unit, a 3.33 ns cycle and 258K words of static RAM, which is 516 KB. The part has no on chip flash at all: it keeps an 8K word boot ROM and loads its code from external memory or from a host processor at every power up. That single fact changes the memory architecture of the board, the production programming flow and the way a firmware update is delivered in the field.

The core is the same C28x pipeline used across the F2833x generation, extended to 300 MHz on a 1.1 V or 1.2 V core with 3.3 V input output and a 1.8 V supply for the PLL and oscillator. The control peripherals are the ones that suit a power stage: eighteen enhanced PWM outputs, up to nine high resolution channels at 55 ps step at 1.1 V and 65 ps at 1.2 V, six 32 bit capture modules that can also act as auxiliary PWM outputs, three 32 bit quadrature encoder modules, two CAN ports, three UARTs, two SPI ports, one I2C bus, two buffered serial ports and an external interface with more than two million words of reach.

Key parameters taken from the TMS320C28346ZFETR document

CoreTMS320C28x, 32 bit, 300 MHz, 3.33 ns cycle, floating point unit in hardware
Math16 by 16 and 32 by 32 multiply accumulate, dual 16 by 16 MAC, IEEE 754 single precision FPU
Memory258K by 16 words of SARAM, 516 KB, split between dedicated and shared blocks; no on chip flash
Boot8K by 16 boot ROM, several boot sources, code downloaded from external memory or a host
External interfaceXINTF, 16 or 32 bit data bus, more than 2M by 16 address reach, DMA on McBSP and SARAM
DMAsix channel controller
PWMeighteen ePWM outputs, up to nine high resolution outputs at 55 ps step at 1.1 V
Capture and encodersix 32 bit eCAP modules usable as capture or auxiliary PWM, three 32 bit eQEP modules
Timerssix 32 bit timers, nine 16 bit timers, three 32 bit CPU timers, watchdog
Analogno on chip converter, external ADC interface with the converter read over the external bus
Serialtwo CAN, three SCI, two SPI, one I2C, two McBSP
GPIO88 shared pins with input filtering
Supply1.1 V or 1.2 V core, 1.8 V PLL and oscillator, 3.3 V input output
Order code factsTMS320C28346ZFETR, BGA ZFE 256 balls, SNAGCU balls, Level-3-260C-168 HR, minus 40 to plus 105 C, Active

The table above is read from the vendor document, not from a distributor summary. Where a window is printed, the window is what a production test should use, and the typical value is only a starting point for the first article.

Where the numbers matter in a real build

No flash means the memory question moves off the die and onto the board, and that is where the cost and the risk sit. The external interface has the address reach for a parallel NOR or a synchronous SRAM, and the boot ROM can load an image from several sources, but every option adds a part, a bus and a timing analysis. On a product that ships in volume the usual answer is a small parallel flash plus a serial EEPROM for parameters, and the first article has to prove the load time from reset to first PWM edge, because that interval is what the customer sees as start up delay.

Three hundred megahertz with a hardware floating point unit is a different operating point from the fixed point parts, and it is chosen for the maths, not for the IO count. A control loop that carries a full transform, a filter cascade and a field oriented current regulator at 20 kHz runs comfortably here, and the same code on a 100 MHz fixed point part would need to be rewritten in scaled integer. The trade is that the RAM has to hold everything, including the working set that would otherwise sit in flash, so the linker script needs a memory map that is decided before the netlist is frozen.

The temperature letter is T, which the document prints as minus 40 to plus 105 C for the 256 ball body. That is a wider range than a consumer part and narrower than the S grade at 125 C, which the same document prints for this body. A power stage inside a sealed enclosure can easily add thirty degrees to the ambient, so a cabinet rated at 60 C ambient is already at the limit of the T grade once the board is loaded, and the S grade is the honest choice for that enclosure.

A 256 ball BGA at this pin count cannot be inspected by eye, and the failure modes that matter are the ones under the package: a voided thermal pad, a cracked ball on the corner, or a warped substrate from a reflow profile that ran hot at the second pass. The document prints the moisture class as level 3, so the bag open window and the bake rule apply exactly as they do for the HLQFP parts, and the inspection plan should include x ray of the thermal pad area on the first article and a cross section on the first lot of any new assembly source.

  • Core rail at the ball under full load at 300 MHz, with the PLL supply measured separately.
  • External bus timing at the fastest wait state setting, read from the memory device data sheet, not from an estimate.
  • Boot to first PWM edge time from a cold reset, including the external image load.
  • High resolution duty at two percent and ninety eight percent on a complementary pair.
  • SARAM retention across a reset and across a supply dip, if the application keeps state between runs.
  • X ray of the thermal pad and the corner balls on the first article of every assembly lot.

Which projects this part fits

This part is chosen where the maths is heavy and the loop is fast: servo amplifiers and motion controllers with a full transform in the loop, industrial AC inverter drives, computer numerical control machining, uninterruptible and server power supplies, solar inverters, telecom rectifier control and active front ends. It also appears where an external converter is preferred, for instance a high resolution measurement chain that needs a converter with better linearity than an on chip block, because the external interface can read that converter without loading the core.

Questions that come up before a purchase order is released

Does this part need external memory to run at all?

Yes. There is no flash on the die, so the application image has to come from an external memory or from a host over one of the boot ports. The boot ROM provides the loader, and the board provides the memory. A board that forgets this detail produces a part that boots into the ROM loader and sits there, which looks like a dead device on a bench.

Is there an analog to digital converter on the chip?

No. This family carries an external ADC interface instead of an on chip converter, and the converter is read over the external bus. That is a deliberate trade: the user picks the converter, its reference and its filtering, and accepts the extra part and the bus timing in exchange for linearity that an integrated block cannot match.

What temperature grades exist for the 256 ball body?

The document prints T at minus 40 to plus 105 C, S at minus 40 to plus 125 C and Q at minus 40 to plus 125 C with AEC-Q100 qualification, all on the ZFE body. This code is the T grade, so a product that needs 125 C has to move to the S or the Q letter rather than assume the package covers it.

Why does the R suffix not arrive on a reel?

The addendum prints this string as 90 pieces in a JEDEC tray and the packaging table prints a five plus one tray stack, so the R letter here does not mean tape and reel in the way it does on the small packages. Treat the carton label as the truth and plan the feeder for a tray, otherwise the line stops on the first kit.

Can the RAM be used as a firmware store in production?

Only if the product keeps power on a battery or reloads at every start. Static RAM loses its content on power down, and the boot ROM then needs a source. If the requirement is a single chip with no external memory, this family is the wrong choice and a flash based member of the same core family is the one to quote.

How SUPERB handles this line

We supply the TMS320C28346ZFETR in original JEDEC trays with date code and lot traceability, and we treat it as a level 3 moisture sensitive BGA with the bake record attached where the bag has been open. Because the part carries no flash, the conversation with a customer usually turns on the memory that sits next to it, and we can quote the external flash and the serial EEPROM on the same order so the two arrive together. The MCU cross reference page lists the alternative members of the same core family, and the one stop BOM sourcing page covers the case where the external memory and the passives have to be consolidated onto one purchase order.