TMP75CQDRQ1
Product Specifications
TMP75CQDRQ1
Texas Instruments — Power Management & Signal Chain
Product Overview
The TMP75CQDRQ1 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
TMP75CQDRQ1: the automotive grade of the 1.8 V sensor
TMP75CQDRQ1 is the AEC-Q100 grade 1 version of the TMP75C, in the 8 pin SOIC body, 2500 pieces on a large reel, marked T75CQ. It keeps the 1.4 V to 3.6 V supply range, the fixed 12 bit resolution and the NCT75 and ADT75 register compatibility of the commercial part, and it adds the qualification and the temperature grade that a vehicle module needs.
The document is SBOS840, a short single device data sheet with the automotive classification printed on the first page: temperature grade 1 from minus 40 to plus 125 ambient, HBM classification level 2 and CDM classification level C5. The commercial part claims C6 on the CDM scale. That one letter is the sort of detail that only surfaces in an audit, and it is worth knowing before somebody claims the two parts are identical in every respect.
What the automotive version does not do is widen the accuracy. The commercial part prints 0.25 degrees typical between 0 and 70 and 1 degree typical across the full window. The automotive part prints the same typical figures over its narrower window, and the maximum limits sit in the electrical table where a qualification engineer will find them.
The order code, the body and the marking
TMP75C is the device. Q is the automotive qualifier. DR is the SOIC body in tape and reel. Q1 is the grade. The addendum prints TMP75CQDRQ1 as active and in production, SOIC with 8 pins, 2500 pieces on a large reel, NIPDAU lead finish, moisture level 2 at 260 degrees for one year, and the marking T75CQ.
The companion row is TMP75CQDGKRQ1, the VSSOP body, same quantity, marked T75CQ as well. Two bodies, one marking, which is the sort of thing that makes a goods inward check necessary rather than optional: the marking does not tell you which body is on the reel, so the reel label and the body dimensions have to be read together.
| Function | digital temperature sensor, two wire interface |
| Supply range | 1.4 V to 3.6 V |
| Operating range | minus 40 to plus 125 degrees Celsius, grade 1 |
| Accuracy | 0.25 degrees typical from 0 to 70 on the commercial parent |
| Accuracy, mid window | 0.5 degrees typical from minus 20 to plus 85 |
| Resolution | 12 bits fixed, 0.0625 degree step |
| Active current | 15 microamps typical |
| Shutdown current | 0.3 microamps typical |
| Addresses | 8 pin programmable addresses |
| Alert output | open drain, programmable trip values |
| One shot mode | single conversion on command |
| Compatibility | pin and register compatible with NCT75 and ADT75 |
| Package | SOIC, D body, 8 pins, 4.90 mm by 3.91 mm |
| Carrier | 2500 pieces on a large reel |
| Marking | T75CQ |
| Moisture level | level 2 at 260 degrees, one year floor life |
| Qualification | AEC-Q100 grade 1, HBM level 2, CDM level C5 |
Why a 1.8 V automotive sensor is a different sourcing problem
Most automotive temperature sensors in our order book sit on a 3.3 V or 5 V rail, and most of them are the TMP75 parent or a remote diode part. The 1.8 V branch exists because the processor next to it moved to 1.8 V and the sensor had to follow without a level shifter. Removing the shifter removes a component, a failure mode and a line item, which is why this part wins sockets that the parent cannot serve.
The sourcing consequence is availability. The 1.8 V automotive branch is a narrower product line than the 5 V industrial one, and the reel sizes reflect it: 2500 pieces in both bodies, no tube option printed, no 250 piece small reel. A prototype build that needs fifty parts is buying a partial reel out of reseller stock rather than ordering to a factory lead time, and that distinction decides whether the schedule holds.
Our own rule is to quote this string only against a confirmed reel, and to say plainly when the stock is a broker position rather than an authorised channel. The component traceability report page describes what we record for each lot, and the PPAP submission checklist page covers the paperwork a tier one buyer will ask for alongside the parts.
What grade 1 actually covers and what it does not
Grade 1 is minus 40 to plus 125 ambient. The part is specified over that window, which is what makes it usable in an engine bay module or a transmission controller. What grade 1 does not do is qualify the assembly around it. The solder joints, the conformal coat, the connector and the housing all have their own qualification, and a board that passes because the sensor is grade 1 has not passed anything.
The second limit is the supply. 3.6 V is the ceiling, and an automotive rail with a load dump transient will exceed it unless the sensor sits behind a regulator. The absolute maximum in the document is not a licence to run at 5 V; it is the point beyond which damage begins.
The third is the accuracy across temperature. 0.25 degrees typical at room temperature is not 0.25 degrees at 125. The document prints the wider window figures for a reason, and a thermal model built on the room temperature number will be optimistic at the top of the range by a factor of four.
Where this string fits in a vehicle build
The commercial document lists server and computer thermal management, telecommunication equipment, office machines, game consoles and set top boxes. The automotive document inherits the same silicon and adds the vehicle applications: climate control, infotainment processor management, airflow sensing, battery control and pump monitoring.
The infotainment processor is the closest fit. The rail is 1.8 V, the bus is I2C from the system on chip, and the sensor watches the edge of a package that can swing forty degrees in a second under load. The 12 bit resolution at 0.0625 degrees is useful there because the trend matters more than the absolute value, and the ALERT pin can drive a throttle without waking the main processor.
Battery control is the second fit and the more demanding one. The sensor is measuring the board near the cells, not the cells themselves, and the 1 degree typical across the full window is enough for that job as long as nobody mistakes it for a cell temperature.
The third fit is the pump and airflow group, and it is the one that most often surprises a buyer. A water pump controller runs the sensor on the same 1.8 V domain as its microcontroller, needs a reading within a second of power up, and cannot afford a calibration fixture at the end of the line. The one shot mode covers the timing, the factory calibration covers the fixture, and the 0.3 microamp shutdown covers the quiescent budget when the vehicle is parked.
Reel handling is the last practical point. Both bodies come in 2500 piece reels with a moisture level 2 rating, which gives one year of floor life. A contract assembly house that runs the same reel across three builds over six months is inside the window but close to it, and the bake decision belongs in the build plan rather than in the purchase order.
Three questions buyers ask about this string
Is it the same die as the commercial TMP75C? Same function, same register map, different qualification and a different CDM classification. Treat it as a separate order code, not as a grade of the same part.
Can it run from a 3.3 V rail? Yes, 3.3 V is inside the 1.4 to 3.6 window, with little margin for a transient. A rail that overshoots to 3.8 V on start up needs a series resistor or a different part.
Does it need calibration? No. The part is factory calibrated, and the accuracy figures are printed without a calibration step. What it does need is a defined thermal path, because the die measures the lead frame before it measures the air.