TMP423BIDCNR
Product Specifications
TMP423BIDCNR
Texas Instruments — Power Management & Signal Chain
Product Overview
The TMP423BIDCNR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
TMP423BIDCNR: three remote channels and a local reading on one address
TMP423BIDCNR is the three remote channel member of the TMP421 family, in the same 8-pin SOT-23 body as the one and two channel versions. It measures three diode connected transistors plus its own die, reports all four over SMBus, and uses the four diode pins as both channel connections and address straps, so a single bus can carry several of these devices without any dedicated address pin.
The B in the string is the grade, not a body change. The family prints an A and a B grade with the same electrical limits and the same temperature window, and both are active in the addendum. What differs is the marking and the qualification history behind the lot, which is a purchasing question rather than an application one, and it is worth knowing because a BOM that names the B grade cannot be filled with an A grade reel without a deviation.
The figures below come from SBOS398C, revised May 2012, and its addendum. They are the same core numbers as the two channel part: 1 degree maximum remote error, 1.5 degrees maximum local error, 12-bit resolution, 115 millisecond conversion per channel, 2.7 V to 5.5 V supply and 400 microamps typical quiescent current.
Four readings for the price of one address
A three channel part is the right answer when the hot devices outnumber the bus segments. A projector with three panels, a storage controller with three processor dies, or a power stage with three phase modules can all be watched from one package. The register map puts the local channel at pointer 00h, the first remote at 01h, the second at 02h and the third at 03h, with the low bytes at 10h, 11h, 12h and 13h, so a host reads eight bytes and has the whole thermal picture.
The local channel is not a substitute for a remote one. It measures the package, which sits on the board, and on a dense board the package can be 10 to 20 degrees cooler than the die it is watching. The local reading is useful for board level ambient and for detecting a fan failure; the remote channels are the ones that protect silicon.
| Channels | one local, three remote diode channels |
| Remote accuracy | 1 degree Celsius maximum, 0.25 degrees typical from 15 to 85 |
| Local accuracy | 1.5 degrees Celsius maximum |
| Resolution | 12 bits, 0.0625 degrees per count |
| Conversion time | 115 milliseconds typical per channel |
| Conversion rate | 0.0625 to 8 conversions per second |
| Remote range | up to plus 150 degrees at the diode |
| Local range | minus 40 to plus 125 degrees |
| Supply range | 2.7 V to 5.5 V |
| Quiescent current | 400 microamps typical, 525 microamps maximum |
| Shutdown current | 3 microamps typical |
| Series resistance | cancelled up to 3 k |
| Ideality factor | programmable through pointer address 21h |
| Interface | SMBus two wire, 30 ms timeout |
| Package | SOT-23-8, DCN, 3.2 mm by 3.2 mm |
| Thermal resistance | 128 degrees per watt junction to ambient |
| Carrier | 3000 pieces on a large reel, marking DAFI |
| Moisture level | level 2 at 260 degrees, one year floor life |
The B grade in the addendum
The addendum prints TMP423AIDCNR and TMP423BIDCNR as separate rows, both active, both SOT-23 DCN with 8 pins and 3000 pieces on a large reel, both minus 40 to plus 125. The lead finish is NIPDAU on both, and the markings differ: DAEI on the A row and DAFI on the B row. The plain B row prints Call TI in the moisture column while the .A revision of the same row prints level 2 at 260 degrees for one year.
That is the sort of inconsistency that only matters when a goods-inward clerk reads the label and the datasheet side by side. Our reading is that the level 2 rating applies to the body, and the Call TI entry is an artefact of how the addendum was generated. We still ask the vendor to confirm the moisture level on the invoice for a B grade order, because a reel that has been out of its bag for longer than a year needs baking and the line schedule has to know.
The A and B grades are otherwise interchangeable in the socket. A customer who has qualified the A grade and wants to switch to B for availability is making a sourcing decision, not an engineering one, and the pin to pin cross reference check we run on such a request is short: same body, same register map, same limits, different marking.
Reading three diodes on a shared bus
The three remote channels share one current source and one ADC, switched in turn. That is why the conversion time is quoted per channel, and why the update rate register divides the time across the channels rather than running them in parallel. At eight conversions per second the part spends most of its time measuring; at one conversion per second each channel is refreshed once a second and the current falls to roughly a third.
The channels are diode fault protected individually. An open pair on channel two does not disturb channels one and three, and the status register names the faulted channel. On a three phase power stage that behaviour is worth a lot: the board keeps two phase temperatures and a local reading after a single sensor lead fails, and the host can derate instead of shutting down.
Series resistance cancellation is the same 3 k figure as the two channel part, and the ideality factor register is the same. The one thing that differs is the pin function table: on the TMP423 the four diode pins are DXP1, DXP2, DXP3 and DXN, with a single shared cathode, while on the TMP422 each channel has its own pair. A board that moves between the two parts has to be rerouted, so the two strings are not drop in replacements even though the body and the register map match.
Thermal diode sources and their limits
The remote transistor can be a discrete NPN or PNP, or a diode brought out of a processor or an FPGA. The document specifies accuracy for a diode connected transistor with the recommended ideality factor, and it warns that a transistor with a very different ideality factor needs the register adjusted. A processor vendor that publishes a factor of 1.002 rather than 1.008 is telling the reader to change the register, and the error if nobody does is a few degrees at the top of the range rather than at room temperature.
Beta compensation is the missing feature on this family. A vertical PNP with a beta of 100 or more behaves well enough that the ideality correction alone is sufficient, while a substrate PNP in a fine geometry process with a beta below 10 needs the automatic compensation that the TMP431 and TMP432 provide. The document is honest about the boundary and the application notes explain the arithmetic; the practical rule we apply is that anything on a 45 nm or finer process goes to the TMP43x family.
Capacitance on the diode pair is the other limit. The error curves show the reading drifting as differential capacitance rises past about 1 nF, and a long cable to a remote diode can easily present that much. Twisted pair, a guard trace and a low pass filter at the sensor end are the usual answers, and on a 150 degree measurement the filter has to be rated for the temperature.
Where three channels are the right number
The document lists LCD, DLP and LCOS projectors, servers, industrial controllers, central office telecom equipment, desktop and notebook computers, storage area networks, industrial and medical equipment, and processor and FPGA monitoring. The three channel string fits the middle of that list: a projector with three panels, a line card with three hot devices, an instrument with a processor, an FPGA and a power stage.
For a medical instrument the local channel is useful as a cross check. If the local reading and one remote reading disagree by more than the expected gradient, the board has a thermal problem, a fan has failed or a heatsink has lifted, and that inference is available without any additional sensor. Our medical device component sourcing page covers the parts we keep for that class of build, and the incoming inspection plan page describes the sample we pull from each reel.
Three questions buyers ask about this string
Is it pin compatible with the TMP422? Same body and same pin count, different pin functions, so no. The two channel part uses individual pairs and the three channel part shares a cathode.
Can one bus carry more than one of these? Yes. The diode pins set the address, so up to four devices share a segment if the straps are arranged deliberately, and the fault detector tells the host which channel belongs to which strapped device.
Does the local channel need a separate calibration? No. It is specified to 1.5 degrees maximum without calibration, and on most boards the local reading is used for ambient and fan health rather than for a precise measurement.