Contact Us

TMP121AIDBVR

Brand: Texas Instruments
Texas Instruments TMP121AIDBVR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TMP121AIDBVR — Power Management & Signal Chain | Superb Automation

TMP121AIDBVR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TMP121AIDBVR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TMP121AIDBVR twelve bit SPI temperature sensor in a six pin SOT-23

The TMP121AIDBVR is a digital temperature sensor with an SPI compatible interface and a 12 bit plus sign result at 0.0625 degrees per code, in a six pin SOT-23 body. It needs no external components and runs from 2.7 to 5.5 volts with a quiescent current of fifty microamps maximum, which is what makes it a fit for a product that has to watch temperature for years on a supply that is always on.

The accuracy the document prints is 1.5 degrees maximum from minus 25 to plus 85 degrees and 2 degrees over the wider minus 40 to plus 125 degree range, with the die itself operating to 150 degrees. That is one grade below the remote diode sensors, and it is the honest trade for a part that needs no calibration, no host interaction and no external parts: the sensor is a complete measuring instrument on three wires.

Key parameters taken from the TMP121AIDBVR document

InterfaceSPI compatible, chip select, clock and data, read only from the host point of view
Resolution12 bit plus sign, 0.0625 C per code
AccuracyPlus or minus 1.5 C maximum from minus 25 to plus 85 C, plus or minus 2 C from minus 40 to plus 125 C
Supply2.7 to 5.5 V, absolute maximum 7 V on the supply and on any input
Current50 microamps quiescent maximum, no shutdown pin on this body
PackageSOT-23, six pins, no external components required
RangeOperation to plus 150 C, with the electrical limits printed over the industrial band
ConversionContinuous conversion, the host reads the most recent result
Supply pinV+ on pin 3 in both the TMP121 and the TMP123 body, which is the difference between the two members
Order code factsTMP121AIDBVR, SOT-23 six pin, tape and reel
FamilyThe TMP123 is the same die with a different pin function on one position, so the two are not interchangeable without checking the board routing
HandlingInputs rated to 7 V, so a 5 V host can drive the part directly without level shifting

The table above is read from the vendor document, not from a distributor summary. Where a window is printed, the window is what a production test should use, and the typical value is only a starting point for the first article.

Where the numbers matter in a real build

Because the host only ever reads, the interface is simple and the failure modes are limited, which is an advantage in a product that is cost sensitive. The sequence is to assert chip select, clock out sixteen bits, deassert, and shift the value into the register. The document shows the frame and the sign handling, and the trap is the first bit: a board that treats the top bit as magnitude rather than sign reads about 128 degrees at any sub zero temperature, which is the classic symptom of a truncated frame.

Fifty microamps maximum at the supply is a real number over the temperature range, not a marketing figure, so the part can stay powered through a product's sleep mode and be read on wake without a warm up delay. The alternative, powering the sensor from a switched rail, saves nothing measurable and adds a settling requirement to every reading, so the usual board keeps it on the always on rail and reads it once per second.

The 1.5 degree window is enough for thermal management and not enough for a precision measurement, and the boundary should be stated in the requirements rather than discovered in test. A board that uses this part to hold a chamber at plus or minus one degree will fail, and a board that uses it to fold back a charger at 60 degrees or to start a fan at 45 degrees has margin to spare. Where the product needs a tighter number, the same board can carry a remote diode sensor instead, and the firmware change is larger than the hardware change.

The six pin body is a comfort for assembly: it is a standard SOT-23 footprint that every line runs, it is inspectable, and the pinout places the supply and ground next to each other on the same side, which helps the decoupling. The one routing point worth taking from the document is to keep the ground return of the decoupling capacitor direct to the ground pin rather than shared with a switching node, because a few millivolts of noise on the ground reference appears directly in the reading.

  • Reading against a reference thermometer at 0, 25 and 85 degrees, with the sign bit checked below zero.
  • Supply current in the always on state at the top of the printed temperature range.
  • Frame timing at the slowest host clock the product will use, because a truncated frame reads as a warm board.
  • Reading stability with a switching regulator within a few millimetres of the package.
  • Decoupling placement and the ground return path on the finished routing.
  • Behaviour at power up, since the part has no reset pin and the first reading after power is what a boot time test sees.

Which projects this part fits

This part fits power supply temperature monitoring, computer and peripheral thermal protection, battery management, office equipment, industrial controllers and instrumentation where a simple, always on, three wire temperature reading is needed. For SUPERB customers building power supplies, telecom line cards and industrial control boards it is the part that answers the question of how to add a temperature input without a bus, a driver or a calibration step.

Questions that come up before a purchase order is released

Is this part SPI or a proprietary interface?

It is an SPI compatible read only interface: clock and data with a chip select, and the host receives sixteen bits. There is no configuration register to write, which is why a driver is a few lines rather than a stack, and why the part works from any microcontroller with a spare SPI channel or even bit banged pins.

Why does the reading look like 128 degrees below freezing?

Because the frame carries a sign bit at the top of the twelve bit field and it was not interpreted. The document shows the format and the two's complement treatment. Checking the frame at minus ten degrees in a cold chamber is the only test that catches this before a field failure.

Can it replace a thermistor without a firmware change?

No. The reading arrives as a digital value in degrees rather than as a resistance, so the conversion and the plausibility window are different. The board change is small, the firmware change is what takes the time, and the fault direction changes because an open connection now reads as a bus fault rather than as a cold extreme.

What about the TMP123 in the same family?

The two members share the die and the package and differ on one pin function, so board routing built for one is not automatically correct for the other. The document prints both pinouts side by side, and a second source plan that lists both should verify the pin assignment on the board rather than on the family name.

Is a pull up needed on the data line?

No, the part drives the data line during the read. The chip select and clock come from the host. What the line does need is a series resistor when the sensor sits on a long cable, and the value should be chosen so the edge rate stays inside what the host samples.

How SUPERB handles this line

We supply the TMP121AIDBVR from original tape and reel with lot traceability, and the parts are checked for body and marking before they are booked to a line. Where the board is comparing simple digital sensors, the power management cross reference page lists the options by bus and accuracy. Where the question is keeping a sensor available over a long production life, component obsolescence management covers the options, and incoming inspection plan covers the arrival checks.