Contact Us

SN65HVD235QDRQ1

Brand: Texas Instruments
Texas Instruments SN65HVD235QDRQ1 is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

SN65HVD235QDRQ1 — Power Management & Signal Chain | Superb Automation

SN65HVD235QDRQ1

Texas Instruments — Power Management & Signal Chain

Product Overview

The SN65HVD235QDRQ1 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

SN65HVD235QDRQ1: 3.3 V CAN transceiver with autobaud loopback and 36 V fault protection

SN65HVD235QDRQ1 is an automotive grade CAN physical layer part in the eight pin SOIC, with bus pins that survive a short to a supply rail and a listen only loopback mode that lets a controller learn the bus rate in a SOIC body of 8 pins. It runs from a single 3.3 V rail at signalling rates up to 1 Mbps, protects the bus pins beyond plus or minus 36 V, survives plus or minus 16 kV human body model, works over a minus 7 V to plus 12 V common mode window with a plus or minus 100 V common mode transient rating, allows up to 120 nodes, and holds a 200 uA standby mode. The AB pin on this member puts the driver output in a high impedance state while the receiver keeps listening, with an internal D to R loopback, so a controller can synchronise to the bus rate without disturbing traffic.

Order code and package

SN65HVD235QDRQ1the catalogue string on this page: eight pin SOIC, 3.3 V, autobaud loopback member of the family. The orderable rows printed in this document are the industrial D and DR strings only, so the reel size and the packing code on the Q1 body have to come from the automotive addendum rather than from this page
SN65HVD235DSOIC D body, 8 pins, 2500 pieces on a large reel, NIPDAU finish, moisture level 1 with unlimited floor life, minus 40 to plus 125 degrees, marking VP235
The three modesthe 233 has a plain loopback pin, the 234 has a sleep mode at 50 nA, and the 235 has autobaud loopback. The pin at position 5 carries a different function on each and they are not interchangeable without a firmware change
SN65HVD230 familythe simpler 3.3 V CAN family without fault protection or loopback, at a lower price, for a bus that is wired once inside a cabinet
ISO1042the isolated CAN transceiver, for a port that crosses a barrier. It needs an isolated supply and costs several times as much

Electrical parameters that decide the application

Supplya single 3.3 V rail, with LVTTL inputs that tolerate 5 V, so the part sits behind either controller family
Signalling rateup to 1 Mbps, the ISO 11898-2 high speed rate, with a slope control resistor on the RS pin to slow the edges where emissions matter
Fault protectionthe bus pins survive beyond plus or minus 36 V, which covers a miswire to a 24 V loop and a short to a 12 V or 24 V supply during service
Common modeminus 7 V to plus 12 V of operating window with a plus or minus 100 V common mode transient rating, which is what a motor drive on the same chassis puts on the pair
Node countup to 120 nodes because of the high input impedance, against the 32 unit loads of an older 5 V transceiver
ESDmore than plus or minus 16 kV human body model on the bus pins
Standby current200 uA typical in standby, and the 234 member of the same family reaches 50 nA in sleep
Autobauda logic high on AB places the driver output in high impedance while the receiver stays active, and the internal D to R loopback lets the controller measure the bus rate from the traffic already on the wire
Unpowered behaviouran unpowered node does not disturb the bus, which is what allows a module to be removed from a live harness
Protectioncross wire protection, loss of ground protection, thermal shutdown at the junction, and glitch free power up and power down so a hot plugged node does not send a false dominant level
Temperatureminus 40 to plus 125 degrees on the printed rows, with the junction limit stated separately at 150 degrees
PackageSOIC D body, 4.90 mm by 3.91 mm, the same outline as the rest of the family

Family variants and how they differ

235 against 233the 233 has a plain loopback for self test, the 235 has autobaud which is a listen only mode with a loopback. A controller that needs to learn the rate takes the 235, one that needs to test its own driver takes the 233
235 against 234the 234 adds a 50 nA sleep mode and no autobaud. A module that must wake on bus traffic takes the 234, a module that must match an unknown bus rate takes the 235
Against the SN65HVD230 familythe 230 family has no 36 V fault rating and no loopback. The price difference is small and the survival difference is large, which is why the fault protected family is the default on anything that leaves a cabinet
Against an isolated partISO1042 removes the ground difference and the fault path entirely, at several times the price and with an isolated supply requirement
Against a 5 V transceivera TJA1050 class part needs 5 V and level shifting. The 3.3 V rail is the reason this family exists in automotive modules that already run on 3.3 V

Points to check before this part goes on a BOM

The string on this page is an automotive Q1 part and the orderable rows in this document are the industrial ones. That is not a contradiction in the vendor documents, it is two documents: the electrical behaviour is shared and the packing, the qualification and the reel sizes for the Q1 body sit in the automotive addendum. A quote that has to state a reel size for SN65HVD235QDRQ1 needs that addendum, and inventing 2500 from the industrial row is the kind of assumption that ends in a shipment dispute.

The autobaud mode is the reason to pay for this member and it is easy to use wrongly. In autobaud the driver is high impedance, so the node cannot transmit and cannot acknowledge, which means the controller has to know when to leave the mode. A node left in autobaud on a live bus looks healthy, receives frames and never answers, and the field symptom is a node that is present but silent.

The 36 V fault rating is a survival figure and it is measured with the fault current limited by the source. A bus pin tied directly to a low impedance 24 V supply for minutes heats the package through the clamp, and the thermal shutdown eventually parks the driver. The part survives, the board may not, and the difference matters when a customer asks whether the port can be shorted indefinitely.

The 120 node figure assumes proper termination and a common ground reference within the common mode window. A bus with a 20 V ground difference between two cabinets is outside the minus 7 V to plus 12 V window and the receiver will not read it, even though the pins survive. Fault survival and correct reception are two different specifications and the datasheet prints both.

The 200 uA standby current is the family figure for the 233 and 235, while the 234 reaches 50 nA in sleep. A module that has to stay alive for weeks on a small battery is choosing between the 234 and a wake circuit, and the 235 cannot be used because autobaud keeps the receiver and the bias network active.

An unpowered node on a live bus is a real condition in a service bay, and this family is specified for it: the pins go high impedance and the bus keeps working. A plain transceiver with a protection diode to its own rail can drag the bus down through the diode when its supply is off, which is the failure that this specification exists to prevent.

Where autobaud earns its price

A gateway or a diagnostic tool that is plugged into an unknown vehicle or machine has to find the bus rate before it can talk. The conventional way is to try a list of rates and listen for valid frames, which works but disturbs nothing only if the driver stays off. The AB pin does exactly that: driver high impedance, receiver on, internal loopback so the controller sees the traffic it is measuring.

The mode is not a substitute for a protocol aware controller. It gives the receiver path and the quiet bus, and the rate measurement, the frame validation and the decision to leave the mode all belong to the firmware. That division is why the part has no register interface and no status pin.

What the order code decides

The string reads SN65HVD235 for the device with autobaud loopback, Q for the automotive qualification, DR for the SOIC body and its reel, and Q1 for the Q100 grade. Nothing in the string selects the fault rating or the common mode window, because those belong to the family. A change from 235 to 233 or 234 keeps the outline and changes the function of pin 5, which is a board and firmware change rather than a substitution.

Where this order code fits

Automotive body and powertrain modules, industrial automation, building climate control and backplane communication are the applications the vendor prints, and a diagnostic or gateway node that has to match an unknown bus rate is where this member is chosen. Teams comparing it with a neighbouring part start from our CAN Bus Transceiver Selection page, and teams replacing a part that has gone end of life start from the Component Obsolescence Management page.

Questions buyers ask

What is autobaud loopback? A mode selected by the AB pin in which the driver output is high impedance and the receiver stays active, with an internal path from D to R, so a controller can measure the bus rate from live traffic without transmitting.

How much fault voltage do the bus pins survive? Beyond plus or minus 36 V, with a minus 7 V to plus 12 V operating common mode window and a plus or minus 100 V common mode transient rating.

Is the reel size published here? No. The rows in this document are the industrial SN65HVD235D and DR strings. The packing for the Q1 body is in the automotive addendum and has to be confirmed before a schedule is quoted.

SUPERB holds and sources this line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a part is moving, the Pin to Pin Cross Reference page sets out the checks that keep a substitute from failing on the bench.