Contact Us

SN65HVD231DR

Brand: Texas Instruments
Texas Instruments SN65HVD231DR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

SN65HVD231DR — Power Management & Signal Chain | Superb Automation

SN65HVD231DR

Texas Instruments — Power Management & Signal Chain

Product Overview

The SN65HVD231DR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

SN65HVD231DR: 3.3 V CAN transceiver whose sleep mode draws 40 nA from the rail

SN65HVD231DR is a CAN protocol physical layer driver and receiver in one 8 pin body, built for a 3.3 V controller and a bus that has to stay connected while the rest of the board sleeps in a SOIC body of 8 pins. It handles signalling up to 1 Mbps on an ISO 11898-2 bus, presents a high input impedance that allows up to 120 nodes, survives plus or minus 16 kV human body model on the bus pins, and works over a common mode window of minus 2 V to plus 7 V with a transient withstand of plus or minus 25 V. The RS pin selects high speed, slope control or sleep, and in sleep the rail current falls to 40 nA typical, which is the reason this member exists next to the SN65HVD230.

Order code and package

SN65HVD231DRSOIC D body, 8 pins, printed Obsolete in the addendum dated 10 August 2026 with no quantity and no carrier, so this exact string is not the one to order
SN65HVD231DR.Athe same body marked Active, 2500 pieces on a large reel, NIPDAU finish, moisture level printed as Call TI rather than a level, minus 40 to plus 85 degrees, part marking VP231
SN65HVD231DRG4Active, 2500 on a large reel, NIPDAU, moisture level 1 with unlimited floor life, the lead free declaration row of the same reel
SN65HVD230 and SN65HVD232the other two members of the family: the 230 has a 370 uA standby mode and the 232 has no mode pin at all, which is the part to use when the controller must never leave the bus
PCA82C250 footprintthe family is printed as a low power replacement for the PCA82C250, so a board built around the older 5 V part can take this 3.3 V device on the same eight pin outline

Electrical parameters that decide the application

Supplya single 3.3 V rail, which is the whole point of the family. A 5 V-only CAN port needs a level shift on both the D and R pins or a different transceiver
Signalling rateup to 1 Mbps, the ISO 11898-2 high speed ceiling, with driver rise and fall times that the RS pin resistor can slow down for a long or poorly terminated bus
Node countup to 120 nodes on one bus because the input impedance is high, against the 32 unit loads an older 5 V transceiver carries
Common modeminus 2 V to plus 7 V of bus common mode, wider than the minus 7 V to plus 12 V of the fault protected family and narrower than an isolated part, which is the trade for the low pin count
Transient withstandplus or minus 25 V of common mode transient, which is the level a motor cabinet or a contactor coil puts on a bus wire in the same harness
ESDmore than plus or minus 16 kV human body model on the bus pins, measured at the pins rather than at the connector, so a cable handled in dry air does not take the part out
Sleep current40 nA typical in sleep on this member, against 370 uA in standby on the 230. A product that has to hold a CAN wake-up filter alive for a year on a coin cell is choosing this number
Operating current10 mA typical and 17 mA maximum in the dominant state with no load, which is the figure to use when the port is powered from a small regulator
Thermal shutdown165 degrees junction with 10 degrees of hysteresis, plus current limiting on the driver so a shorted bus heats the part and then parks it rather than destroying it
Power sequencingglitch free on power up and power down, so a node inserted into a live bus does not send a false dominant level onto the wire
Fail safean open circuit on the bus leaves the receiver output in a defined state, which is what stops a controller from reading noise as a start of frame
Temperatureminus 40 to plus 85 degrees on every printed row of this string, five degrees below the plain industrial family members that stop at 105

Family variants and how they differ

231 against 230the 230 has a standby mode at 370 uA and the 231 has a sleep mode at 40 nA. The pin function is the same and the mode current is four orders of magnitude apart, so the choice is made by the standby budget, not by the bus
231 against 232the 232 carries no mode pin and no low power state at all. A board that expects to wake a sleeping controller from the bus cannot use it
Against SN65HVD233the 233 adds plus or minus 36 V fault protection, a wider common mode window and a loopback pin, for a higher price. A cabinet internal bus does not need the fault rating, a field bus often does
Against an isolated transceiveran ISO1042 class part puts a barrier inside the package and removes the ground difference problem. It costs several times as much and needs an isolated supply, which is the reason a 3.3 V single rail part still ships in volume
Against a 5 V parta PCA82C250 or TJA1050 works on a 5 V rail and needs level shifting at 3.3 V. The family was introduced to remove those two level shifters and one rail

Points to check before this part goes on a BOM

The string on the page is printed Obsolete while the same body with an A suffix is Active, and that is the first thing to settle before a quote goes out. The A row carries the 2500 piece reel, the NIPDAU finish and the VP231 marking, and it is the row a distributor will ship when the plain string is ordered. Any customer document that names SN65HVD231DR has to be aligned to the A row, otherwise the incoming inspection compares a label against a drawing that no longer has a matching line in the vendor addendum.

The sleep current is the number this member is bought for, and it only holds while the bus is in a recessive state and the controller holds the RS pin at the level that selects sleep. A pull up or pull down that is wrong by one resistor keeps the part in standby at 370 uA and drains the battery, and the symptom is a product that works on the bench and goes flat in the field. The mode table in the datasheet is short and worth copying into the test procedure.

The moisture level on the A row is printed as Call TI instead of a level, while the G4 row of the same reel prints level 1 with unlimited floor life. That difference matters to a contract assembly house that has to write a floor life onto its process card, and it is the reason the G4 string is worth naming when a customer asks for a lead free part with a documented moisture level.

The 120 node figure comes from the input impedance of the receiver, and it changes when terminators are added. A bus with 120 ohm termination at both ends and 120 nodes is a bus with a heavy DC load, and the differential output of this part is specified into 60 ohm, which is the two terminators in parallel. Above 60 nodes the leakage of the bus pins starts to matter and the datasheet curve on differential output against load is the one to read.

The thermal shutdown is a survival feature and not an operating point. It trips at 165 degrees junction, which a small SOIC reaches in a few seconds when a driver is held dominant into a short, and it releases 10 degrees lower. A customer who reports a port that stops transmitting for a few seconds after a wiring fault is describing this behaviour, not a failed part.

Nothing in this part sets the isolation or the surge rating of the port. A CAN port that crosses between cabinets needs a barrier, and that barrier is a separate device or a transformer based isolator. An offer that lists a surge figure against the transceiver is describing the board, not the silicon.

Where the 40 nA matters

Automotive body modules, battery powered gateways and metering nodes keep a CAN peripheral alive while the application processor is off, and they wake on the first dominant edge. The transceiver has to stay biased and listening at a current the standby supply can carry for months, and 40 nA is below the self discharge of the cells that usually feed that rail, so the transceiver stops being the limiting element.

The catch is that the wake path has to be wired to the R pin and not to the bus. If the controller wakes on a supply comparator instead of on the receiver output, the part still draws its sleep current and the module misses the frame that arrived while it was waking.

What the order code decides

The string reads SN65HVD231 for the device, D for the SOIC body and R for the large reel. The A and G4 rows are the ones printed as Active, and both sit at 2500 pieces. No suffix in the string selects the mode current, the temperature range or the ESD level, because each member of the family carries one of each, so a substitution inside the family is a change of part number and never a change of reel letter.

Where this order code fits

Industrial automation, motor and robotic control, building climate control and telecom rack status buses are the applications the vendor prints, and the low power mode is what makes the part usable in a body module that sleeps with the vehicle. Teams comparing it with a neighbouring part start from our CAN Bus Transceiver Selection page, and teams replacing a part that has gone end of life start from the Component Obsolescence Management page.

Questions buyers ask

Is SN65HVD231DR still available? The plain string is printed Obsolete in the current addendum. The same body is Active as SN65HVD231DR.A and SN65HVD231DRG4, both 2500 pieces on a large reel and both minus 40 to plus 85 degrees.

How much current does it draw in sleep? 40 nA typical with the RS pin held at the sleep level and the bus recessive. The 230 member of the same family holds 370 uA in standby instead.

Does it protect the bus from a short to 24 V? No. The common mode window is minus 2 V to plus 7 V with a plus or minus 25 V transient rating. A bus that can be shorted to a supply needs the fault protected family or an external clamp.

SUPERB holds and sources this line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a part is moving, the How to Verify a Drop in Replacement page sets out the checks that keep a substitute from failing on the bench.