Contact Us

ISO7763FDWR

Brand: Texas Instruments
Texas Instruments ISO7763FDWR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ISO7763FDWR — Power Management & Signal Chain | Superb Automation

ISO7763FDWR

Texas Instruments — Power Management & Signal Chain

Product Overview

The ISO7763FDWR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

ISO7763FDWR: three channels each way at 100 Mbps

The ISO7763FDWR is the six channel member of the ISO776x family with three channels forward and three reverse, a low default and a wide 5000 VRMS barrier. Six channels in one package cover a bidirectional bus, a motor control interface with three commands out and three status lines back, or a serial link with a clock and data pair in each direction.

The family keeps a 100 Mbps rating across every direction map, so the reverse channels are as fast as the forward ones. Propagation delay is 6 ns minimum, 11 ns typical and 17 ns maximum at 5 V. Supply current is 1.4 mA per channel typical at 1 Mbps, which is low for a six channel part and is the reason this family replaced optocoupler arrays on many boards.

Isolation depends on the body. The wide SOIC body on this page carries 5000 VRMS and 7071 VPK, the shrink body of the same family carries 3000 VRMS and 4242 VPK, and the surge capability reaches 12.8 kV. Both are certified to the same standards, and the choice between them is a creepage and a board area question.

Key data for the ISO7763FDWR

ChannelsSix, three forward and three reverse
Data rate100 Mbps maximum specified on either direction
Isolation in this bodySOIC DW gives 5000 VRMS and 7071 VPK, the shrink body of the family gives 3000 VRMS and 4242 VPK
Supply2.25 V to 5.5 V on each side, 2.25 V to 5.5 V level translation
TimingPropagation delay 11 ns typical and 17 ns maximum at 5 V, pulse width distortion 5.9 ns same direction
ImmunityCMTI 100 kV per microsecond typical and 85 kV per microsecond minimum
Default stateOutput low on loss of input power or signal, the F variant

Body, packing and marking data

BodySOIC DW, 16 pins, 10.30 mm by 7.50 mm, the wide body that carries the 5000 VRMS barrier
Packing2000 pieces on a 330 mm reel, carrier width 16.4 mm
FinishNIPDAU, moisture level 2, 260 C peak, one year floor life
Marking7763F on the body
TemperatureMinus 55 C to plus 125 C

Six channels, three each way, and what that changes

A three and three map lets a controller send a clock, data and a chip select while receiving data, a ready line and a fault from the same field connector. That is a complete SPI style transaction across one barrier in one package, and it removes the second isolator and the second set of decoupling capacitors that a pair of four channel parts would need.

The price of the six channel body is the pin count and the land area. The wide body takes 10.3 mm by 7.5 mm of board, and the isolation slot has to sit under it, so a six channel part placed badly costs more board than two smaller ones placed well. Plan the slot before the part is fixed.

Where a six channel bidirectional barrier is used

Motor control, grid equipment and medical monitors use this family, and the three and three member covers the interfaces where the return path carries as much information as the forward path. A field IO block that reads three sensors and drives three actuators is the same shape in a different industry.

For projects that need the barrier inside a safety submission, our medical device component sourcing page lists the certificates and the working voltage question, and the pin to pin cross reference page covers what has to match when an older six channel part is replaced.

Questions we get on this code

Buyers ask whether the reverse channels can be left unused on a board that later needs them. They can, and the inputs on the unused side still need a defined level rather than a floating pin, because a floating input on a barrier part draws current and can oscillate. Tie the unused inputs to the local rail through a resistor, and enable the output only when the receiving logic is ready for the line to move.

The second question is whether the 5000 VRMS wide body is available at the same 2500 piece reel as the shrink body. It is not. The wide body ships 2000 pieces on a 330 mm reel with a 16.4 mm carrier, so a line that is set up for a 2500 piece shrink reel will need a different feeder setup for this part.

A third question is about the six channel current. At 1 Mbps the part draws about 1.4 mA per channel, and at 10 Mbps with all six switching the input side rises past 5 mA. That rise is what a low power budget has to allow for, because the barrier current scales with the switching activity rather than with the load on the other side.