Contact Us

ISO7240CFDWR

Brand: Texas Instruments
Texas Instruments ISO7240CFDWR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ISO7240CFDWR — Power Management & Signal Chain | Superb Automation

ISO7240CFDWR

Texas Instruments — Power Management & Signal Chain

Product Overview

The ISO7240CFDWR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

ISO7240CFDWR: four channels forward with a low default

The ISO7240CFDWR is a four channel digital isolator with every channel in the forward direction and a default output low. It belongs to the ISO724x group, where the C letter marks the 25 Mbps member and the M letter marks the 150 Mbps member. The F in the string is the default state, so a loss of input power or input signal drives every output low rather than leaving it high.

Isolation is 2500 VRMS for one minute under UL 1577, with the VDE and CSA certificates carried on the same die. Each side runs from its own supply in the 3.3 V to 5 V range, and the translation between the rails happens inside the barrier. Propagation delay on the C member is 18 ns typical and 42 ns maximum at 5 V, with pulse width distortion of 2.5 ns typical, so the part is fast enough for a 25 Mbps bus with margin and slow enough that edge ringing on a long cable does not become a false edge.

Four forward channels in one body are the shape used for a parallel bus, a bank of gate drives or four chip selects. Where a fifth line has to come back, the sibling part with the reverse channel is the right order code, and mixing the two on one board is a pin map question rather than an electrical one.

Key data for the ISO7240CFDWR

ChannelsFour, all forward, with enable pins on both sides
Data rate25 Mbps on the C member, 150 Mbps on the M member of the same family
Isolation2500 VRMS for 60 s per UL 1577, reinforced according to the VDE certificate carried by the family
Supply3.3 V or 5 V on each side, with level translation across the barrier
TimingPropagation delay 18 ns typical and 42 ns maximum at 5 V, pulse width distortion 2.5 ns typical
Default stateOutput low on loss of input power or input signal, which is what the F letter means
EnableOutput enable on each side puts the outputs into high impedance for multi driver buses

Body, packing and status data

BodySOIC DW, 16 pins, 10.30 mm by 10.75 mm outline on the wide body
Plain rowISO7240CFDWR is marked Obsolete in the current addendum, with no quantity and a call to the vendor for finish data
A rowISO7240CFDWR.A is active, 2000 pieces on a 330 mm reel, NIPDAU, minus 40 C to plus 125 C
TemperatureMinus 40 C to plus 125 C on both rows

The obsolete flag on the plain row

The orderable addendum marks the exact string on this page as obsolete and lists an A revision as active at 2000 pieces per reel. That is not a mistake in the catalogue, it is a lifecycle fact that a buyer has to act on. An order placed on the plain string may be filled from remaining stock with a date code that is already old, or it may be refused.

Two routes work. The first is to order the A revision and confirm that the board accepts it, which for this family means checking the same pin map and the same default state. The second is a last time buy against the plain row if a customer drawing names that exact string and no substitution is allowed. Both routes belong in writing before the schedule is set, and our component obsolescence management page sets out how to record the decision, with the last time buy and LTB planning page covering the quantity question that follows.

Where four forward channels are used

Gate drive signals for a three phase stage plus one enable, four chip selects for a memory bank, or four parallel data lines crossing from a controller to a field connector all fit this part. The default low matters most in the gate drive case: when the controller loses power, every gate signal falls low and the power stage turns off instead of holding a state.

The enable pins let two controllers share one set of isolated outputs, which is how redundant control is built without a second isolator. The trade is that the enable path is slower than the data path, so a switchover takes longer than one bit period and the receiving logic has to tolerate the gap.

Questions we get on this code

Buyers ask whether the 25 Mbps C member can run a 50 Mbps bus. It cannot, and the M member of the same family is the one rated to 150 Mbps. The two parts share a body and a pin map, so the choice is made on the data rate and the price, not on the footprint.

The second question is whether the obsolete flag applies to the whole family. It does not. Only the plain string is marked obsolete in this revision. The A revision is active, and the M member has its own rows. Reading the status column on the exact string is the only reliable check, since a distributor page often shows a family status rather than a row status.