Contact Us

INA780BIDEKR

Brand: Texas Instruments
Texas Instruments INA780BIDEKR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

INA780BIDEKR — Power Management & Signal Chain | Superb Automation

INA780BIDEKR

Texas Instruments — Power Management & Signal Chain

Product Overview

The INA780BIDEKR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

INA780BIDEKR: 85 V and 75 A through an integrated 400 microhm shunt

The INA780BIDEKR is the high current member of the integrated shunt power monitor family: a 400 microhm shunt, 75 A continuous at 25 C, peak measurement to 78.64 A, and a common mode range of minus 0.1 V to 85 V, all in a 15 pin WSON at 6 mm by 6 mm. The 16 bit converter reports current, bus voltage, die temperature, power, energy and charge, and the bus side runs at 2.94 MHz over I2C.

Halving the shunt against the 800 microhm members doubles the current rating and halves the shunt loss, which is the trade that makes 75 A practical in a package. The B grade offset current is 125 mA, double the 62.5 mA of the 800 microhm parts, because the same offset voltage across a smaller resistance is a larger current. Drift is 50 uA per degree, gain error is 1.25 per cent, power accuracy is 1.6 per cent and energy accuracy is 2.1 per cent at 25 C full scale. The A grade brings the offset to 12.5 mA and the gain error to 0.75 per cent.

Key data for the INA780BIDEKR

Shunt400 microhm internal, 75 A continuous at 25 C, peak measurement to 78.64 A
Common modeMinus 0.1 V to 85 V, which covers a 48 V pack at 58 V full charge and leaves margin for a transient
Converter16 bit delta sigma, 50 microseconds to 4.12 ms conversion, averaging from 1 to 1024 samples
Accuracy on the B gradeOffset current 125 mA with 50 uA per degree drift, gain error 1.25 per cent, power 1.6 per cent and energy 2.1 per cent at 25 C full scale
Accuracy on the A gradeOffset current 12.5 mA, gain error 0.75 per cent, power 0.9 per cent and energy 1.4 per cent
Interface and supplyI2C at 2.94 MHz with 16 addresses, 2.7 V to 5.5 V supply, 640 uA typical and 5 uA maximum in shutdown

Body, marking and reel data

BodyDEK, 15 pin WSON at 6.00 mm by 6.00 mm, the largest of the three integrated shunt bodies
ReelR suffix is the large reel; the exposed pad is the thermal path and has to be soldered to a plane that can carry the 75 A return
Current pathThe shunt pins carry the load, so the copper entering the pad is part of the rating and not only a connection
GradesA and B share the body and the pinout; the offset and gain rows are the only difference
DocumentSBOSAB6A dated July 2023 and revised December 2023, covering INA780A and INA780B

Where 75 A in one package changes the busbar

A 75 A rail is a server power shelf, a rack busbar or a traction inverter input, and those are the places where a discrete shunt is a mechanical part rather than a component. The INA780B replaces the shunt, the Kelvin wiring and the monitor with one 6 mm square package, and the current path becomes a copper pour instead of a bolted connection. That change removes a fastener, a torque specification and a source of field failure, which is often worth more than the part cost.

The thermal budget is the constraint that decides the usable current. At 75 A through 400 microhm the dissipation is 2.25 W, which a 6 mm by 6 mm package cannot shed without a copper area on the board and a path to the enclosure. The 25 C rating is the vendor's statement of what the package can do on the reference board, and a board that runs in a 60 C enclosure should either derate the current or add copper on both sides with thermal vias.

The offset current of 125 mA on the B grade is the number to weigh against the application. On a 75 A full scale it is 0.17 per cent, and on a 5 A standby current it is 2.5 per cent, so a product that has to report a low standby current accurately needs the A grade at 12.5 mA. A product that reports a bulk current and its energy does not. Our power management cross reference tabulates the three shunt values with their current ratings, and the one stop BOM sourcing note covers how the grades are quoted when a customer asks for both.

Buyer questions on the INA780BIDEKR

Does the 85 V rating allow a 72 V pack? A 72 V pack reaches about 84 V at full charge, which is at the edge of the window and leaves no margin for a transient. The transient row should be checked before the part is committed.

Can the part measure reverse current? Yes, the input range extends to minus 0.1 V and the current register is signed, so a regenerative event reads as a negative current and the energy accumulator handles the sign.

Is the 6 mm body a drop in for the 5 mm member? No. The body, the pad and the current path are different, so the footprint changes and the thermal copper has to be re evaluated.

Availability and ordering notes

INA780BIDEKR is the B grade of the 85 V, 75 A integrated shunt monitor in the 15 pin WSON. The A grade is a separate order code in the same body. Because the current path goes through the package, a customer's board has to be reviewed for copper area before the part is quoted as a replacement for a discrete shunt, and the quotation should say that the thermal check is the customer's to complete rather than implying the 75 A rating is available on any board.