INA310A2QDGKRQ1
Product Specifications
INA310A2QDGKRQ1
Texas Instruments — Power Management & Signal Chain
Product Overview
The INA310A2QDGKRQ1 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
INA310A2QDGKRQ1: the automotive grade of the 50 V/V current sense amplifier with comparator
The INA310A2QDGKRQ1 is the automotive qualified version of the 50 V/V member of the INA310x family. It measures a shunt drop across a common mode range of 4 V to 110 V, including 4 V below ground, and it carries an open drain comparator with a 0.6 V internal reference on the same die. The Q1 suffix means the part is released against the automotive qualification and the PPAP flow, which is a different release route from the industrial INA310A2IDGKR even though the body and the pinout are the same.
At 50 V/V a 1 milliohm shunt produces 50 mV per ampere, so a 3 V output swing is reached at 60 A and a 20 A working current produces 1 V. Gain error is 0.15 per cent maximum on the A grade with 10 ppm per degree drift, offset is 20 uV maximum with 0.25 uV per degree drift, and the DC common mode rejection is 160 dB typical. The comparator propagates in 1 microsecond typical and can latch until the RESET pin is driven.
Key data for the INA310A2QDGKRQ1
| Gain | 50 V/V fixed by the A2 code, which is the setting that matches a 1 milliohm shunt to a 60 A full scale |
| Common mode | Minus 4 V to 110 V operational, minus 20 V to 120 V survival, independent of the 2.7 V to 20 V supply |
| Accuracy | A grade gain error 0.15 per cent maximum with 10 ppm per degree drift, offset 20 uV maximum with 0.25 uV per degree drift |
| Comparator | Open drain output, 0.6 V internal reference, 1 microsecond typical propagation delay, latching mode released by the RESET pin |
| Speed and rejection | 1.3 MHz bandwidth, 2.5 V per microsecond slew rate, 160 dB typical DC common mode rejection |
| Supply and grade | 2.7 V to 20 V single rail at 1.6 mA; Q1 automotive release, with the ambient and junction limits taken from the automotive document rather than from the industrial one |
Body, marking and reel data
| Body | DGK, 8 pin VSSOP at 3.00 mm by 3.00 mm, shared with the industrial member |
| Grade | Q1 automotive; the industrial document SBOSA86 carries the electrical rows but not the automotive release data |
| Reel | R suffix is the large reel; the automotive reel label carries the lot and the date code that the PPAP record refers to |
| Pins | IN plus, IN minus, VS, GND, OUT, CMPIN, CMPOUT and RESET, unchanged from the industrial part |
| Traceability | An automotive line item needs the full order code, the date code and the lot on the packing list, because a substitute industrial part cannot be shipped against it |
Where the automotive grade is not optional
Two things separate the Q1 release from the industrial part in practice. The first is the qualification data: the automotive release carries the temperature cycling, the high temperature operating life and the PPAP package that a tier one supplier has to file. The second is the change control: a silicon revision on an automotive part is notified, and on an industrial part it can ship without a notice. A 48 V battery management board in a vehicle needs both, and that is why the Q1 line item cannot be filled with the industrial code when stock is short.
The measurement itself is unchanged. On a 48 V pack the shunt sits in the return path or in the negative leg, and the minus 4 V common mode keeps the amplifier linear while a contactor opens and the bus rings below ground. The comparator gives a hardware overcurrent flag that does not depend on the controller being awake, which is the reason this family is chosen over a digital monitor for a protection path. Where a customer is comparing the automotive and industrial lines for a dual source, our amplifier cross reference separates the qualified lines from the industrial ones, and the pin to pin cross reference note lists the gain and comparator options so a substitution is not made on body size alone.
Buyer questions on the INA310A2QDGKRQ1
Can the industrial part be used during prototype and the Q1 part in production? Electrically yes, and the board does not change. The production line item still needs the Q1 code and its own qualification record, so the prototype build should be labelled as such rather than shipped as a production equivalent.
Does the automotive grade change the common mode range? No. The 4 V to 110 V window and the minus 4 V lower limit are properties of the die, not of the qualification, although the automotive document states its own operating temperature limits and those govern the release.
Is the latch reset level compatible with a 3.3 V controller? The RESET pin is an input with a threshold that follows the supply, so a 3.3 V controller works when the part is supplied from 3.3 V; on a 5 V supply the threshold moves and the controller has to be checked against it.
Availability and ordering notes
INA310A2QDGKRQ1 is the automotive 50 V/V member in the 8 pin VSSOP. The industrial document in our library, SBOSA86 dated March 2023, covers the A and B grades and the five gains, but the automotive release is a separate document, and the PPAP file has to come from the vendor rather than from the catalogue. Where a line is quoted for a vehicle programme, ask for the date code and the lot on the packing list before the goods leave, since a reel without that record cannot be accepted by the customer's incoming inspection.