Contact Us

INA241B2IDDFR

Brand: Texas Instruments
Texas Instruments INA241B2IDDFR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

INA241B2IDDFR — Power Management & Signal Chain | Superb Automation

INA241B2IDDFR

Texas Instruments — Power Management & Signal Chain

Product Overview

The INA241B2IDDFR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

INA241B2IDDFR: 20 V/V with the 0.1 percent window

The INA241B2IDDFR is the 20 V/V member of the B accuracy tier in the 8 pin SOT-23-THIN body. It carries the same input stage as the rest of the family, minus 5 V to 110 V operational and 120 V survival, with 166 dB of typical DC common mode rejection and 1.1 MHz of bandwidth at every gain. Offset is 150 uV maximum with 0.5 uV per degree, gain error 0.1 percent maximum with 5 ppm per degree.

Twenty volts per volt is the gain that fits the largest number of industrial current ranges, which is why it is the one most often substituted during a shortage. A 1 milliohm shunt gives 20 mV per amp, so a 50 A peak reaches 1 V, and a 5 milliohm shunt gives the same 1 V at 10 A. Both are comfortable on a 3.3 V or 5 V converter with the output biased at mid rail, and both stay well above the offset floor through the useful part of the range.

Key data for the INA241B2IDDFR

Gain20 V/V fixed, one of five gains offered in the B tier
Common modeMinus 5 V to 110 V operational, minus 20 V to 120 V survival, independent of the 2.7 V to 20 V supply
AccuracyOffset 150 uV maximum, 0.5 uV per degree, gain error 0.1 percent maximum, gain drift 5 ppm per degree
Rejection166 dB DC typical, 104 dB at 100 kHz, 89 dB at 1 MHz, with PWM rejection to 125 kHz
Speed1.1 MHz at all gains, 8 V per microsecond slew, 1 us to settle within 1 percent
Supply2.7 V to 20 V, 2.5 mA typical and 3 mA maximum, minus 40 C to 125 C

Body, marking and reel data

BodyDDF, 8 pin SOT-23-THIN at 2.9 mm by 2.8 mm
Reel3000 pieces on a large reel at moisture level 1, unlimited floor life
FinishNIPDAU, lead free reflow compatible
Marking2PN3 on this gain and body, a code that names gain and body but not the accuracy tier
Tier noteThe A2 string carries 10 uV offset and 0.01 percent gain error in the same package

Where 20 V/V at the looser window fits

Battery disconnect units, precharge control, tool motor controllers and industrial valve banks all use this gain. The common thread is a current that is measured for control rather than for billing: the controller needs to know roughly where on the torque curve it is, and a five percent error changes the response by less than the mechanical tolerance of the load.

Two limits deserve attention when the part is used in a pack. The first is that 150 uV of offset at 20 V/V is 3 mV at the output, which is invisible on a 1 V signal and dominant on a 20 mV one, so the usable low end of the range is set by the tier and not by the converter. The second is the reference arrangement: for a bidirectional measurement both REF pins have to sit at mid rail, and a resistor divider there has to be low enough impedance to hold the reference under load and stable enough not to drift with temperature. Where a programme is considering the A tier for a tighter low end, the amplifier cross reference note has both rows, and the power management cross reference covers the reference and converter pairings that usually surround it.

Buyer questions on the INA241B2IDDFR

How does the B tier affect a bidirectional measurement? The offset window applies around the mid rail reference, so a signal that crosses zero has a band of plus or minus 150 uV of input where the sign is uncertain. At 20 V/V that band is 3 mV at the output.

Is the part available in the automotive grade? This string is the industrial one. The automotive version is a separate qualified family, and its packing rows are in the automotive addendum rather than in this one.

Why is the supply range 20 V wide? So the amplifier can run from the same rail as the gate driver or the housekeeping converter without a dedicated regulator, which removes a sequencing dependency at power up.

Availability and ordering notes

The DDF rows are active at 3000 pieces on a large reel with NIPDAU at moisture level 1. This family is one of the ones where a substitution between gains is easy and a substitution between tiers is not, because the gain change only alters calibration constants while the tier change alters the accuracy the board was qualified against. Both substitutions appear in the ordering table with identical packing, so the only defence is to quote the full string and confirm it against the vendor record. Our incoming inspection plan note describes the label check that keeps the tiers apart in stores.