Contact Us

INA240A4DR

Brand: Texas Instruments
Texas Instruments INA240A4DR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

INA240A4DR — Power Management & Signal Chain | Superb Automation

INA240A4DR

Texas Instruments — Power Management & Signal Chain

Product Overview

The INA240A4DR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

INA240A4DR: 200 V/V amplifier built to ignore a switching common mode

The INA240A4DR is the 200 V/V member of the INA240 family, a bidirectional current sense amplifier that measures across a shunt from 4 V to 80 V of common mode while running from a 2.7 V to 5.5 V supply. The feature that defines the family is enhanced PWM rejection: the input stage is built to suppress the large common mode steps produced by a motor bridge, so the output does not ring and recover on every switching edge. At 50 kHz the AC common mode rejection is 93 dB, and the DC figure is 132 dB.

The A4 gain of 200 turns a 100 mV shunt drop into 20 V, so the usable input window on a 5 V supply is a little under 25 mV, which is 250 uA through a 100 milliohm shunt or 12.5 A through a 2 milliohm shunt. Offset is 25 uV maximum with 250 nV per degree of drift, and gain error is 0.2 percent maximum with 2.5 ppm per degree, so the low end of the window stays meaningful across a cabinet temperature swing.

Key data for the INA240A4DR

Gain200 V/V fixed; the family also offers 20, 50 and 100 V/V in the same body and pinout
Common mode4 V to 80 V operational, with a negative common mode that allows operation below ground during a solenoid flyback
AccuracyOffset 25 uV maximum, drift 250 nV per degree, gain error 0.2 percent maximum, gain drift 2.5 ppm per degree
Rejection132 dB DC common mode rejection, 93 dB at 50 kHz, both measured with the input stage biased at mid range
Speed400 kHz bandwidth at every gain, 2 V per microsecond slew, settling to 0.5 percent in 9.6 us
Supply2.7 V to 5.5 V, 1.8 mA typical and 2.4 mA maximum quiescent, minus 40 C to 125 C

Body, marking and reel data

BodyD, 8 pin SOIC at 4.9 mm by 3.91 mm; the same die ships in the PW TSSOP at 4.4 mm by 3 mm
Reel2500 pieces on a large reel for the .A row of this string, and 75 pieces in a tube for the plain D row
FinishNIPDAU at moisture level 2 with a one year floor life on the SOIC rows
MarkingI240A4 on the SOIC, which names the gain and the family but not the body height
Grade noteThe automotive versions are a separate qualified family under INA240-Q1, not a suffix of this order code

Where 200 V/V suits a motor bridge

Motor drives, solenoid and actuator control, injection moulding machines, cordless tools and drone propeller speed control are the listed applications. They share a shunt that has to be small, because the shunt sits in the phase leg and every milliohm is heat inside a sealed housing. With a 1 milliohm shunt and a 200 V/V gain, 5 A produces 1 V at the output, which is a signal a 3.3 V converter reads with 60 dB of headroom and no second stage.

The constraint is the output swing, not the input range. On a 3.3 V supply the output reaches about 3.2 V, which is 16 mV of input, so the peak measurable current on a 1 milliohm shunt is 16 A. A drive that can deliver 40 A needs a smaller shunt or a lower gain, and that is why the family publishes 20, 50 and 100 V/V in the same body: the gain is a system decision that follows the shunt, not the other way round. Where a board is moving between gain options or between the INA240 and the higher voltage INA241, the amplifier cross reference lists both by gain, common mode and bandwidth, and our medical device components note covers the qualification paperwork that a clinical build needs on top of the electrical data.

Buyer questions on the INA240A4DR

Why does the common mode floor sit at 4 V? The input stage needs headroom above the negative rail to work with its chopping scheme. Below 4 V the part still functions but the offset and rejection rows are not specified, which is why a 3.3 V rail is not the place for this amplifier unless the shunt sits at a higher potential.

Can it measure a negative current? Yes, the input is bidirectional and the negative common mode range allows the input to swing below ground, which is what happens when a solenoid drives current back during turn off.

Does the 200 V/V version have less bandwidth? No, the 400 kHz figure holds at every gain in this family, which is unusual and is one reason the part is used in current loops rather than only in protection.

Availability and ordering notes

The A4 gain is published in the addendum with an unusual status pattern. INA240A4D, the tube row, is printed Obsolete, and the plain INA240A4DR row carries no status and no quantity with a finish column that reads Call TI, while the .A row of the same string is active at 2500 pieces on a large reel. INA240A4PW is also printed Obsolete, with the PWR row active. In practice this means an order for A4DR should name the .A row or be confirmed against the vendor record, and a line that has been buying on the plain string for years may be getting stock from a row that is no longer published. Where a build is exposed to that kind of change, the pin to pin cross reference note records which gain options share a land pattern so a substitution does not need a board change.