Contact Us

INA213AIDCKR

Brand: Texas Instruments
Texas Instruments INA213AIDCKR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

INA213AIDCKR — Power Management & Signal Chain | Superb Automation

INA213AIDCKR

Texas Instruments — Power Management & Signal Chain

Product Overview

The INA213AIDCKR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

INA213AIDCKR: 50 V/V zero drift monitor, the widest bandwidth row in the family

The INA213AIDCKR is the 50 V/V member of the INA210 to INA215 family, a bidirectional current shunt monitor in a 6 pin SC70 body that reads a shunt from 0.3 V below ground to 26 V above it while running from 2.7 V to 26 V. Gain 50 is the lowest in the family and that is why this row has the widest bandwidth, 80 kHz with a 10 pF load, against 7 kHz on the 500 V/V INA211 and 4 kHz on the 1000 V/V INA212. Offset is 35 uV maximum, offset drift 0.5 uV per degree, gain error 1 percent over temperature on the A and B rows and 0.5 percent on the C row.

The suffix needs a warning this year. The addendum prints the plain INA213AIDCKR string as obsolete against a UQFN 10 pin body, while the lettered rows of the same string are active in the SC70 6 pin body at 3000 pieces on a large reel with NIPDAU and moisture level 1, marking CFT. That is a documentation split rather than a product change, but a purchase order that quotes the bare string without a letter can land on the obsolete row.

Key data for the INA213AIDCKR

Gain50 V/V, the lowest of six options, which gives it the widest bandwidth in the family
InputCommon mode minus 0.3 V to plus 26 V, bidirectional, independent of the 2.7 V to 26 V supply
AccuracyOffset 35 uV maximum, drift 0.5 uV per degree, gain error 1 percent over temperature on A and B rows
Bandwidth80 kHz with a 10 pF load, against 30 kHz at gain 100 and 7 kHz at gain 500
Supply2.7 V to 26 V, 100 uA maximum quiescent current, no enable pin
OutputVoltage output at the REF pin potential at zero current, so REF decides unidirectional or bidirectional use

Body, marking and reel data

BodyDCK, SC70 6 pin, 2.00 mm by 1.25 mm on the active lettered rows; the plain row prints the UQFN body
Reel3000 pieces on a large reel on the lettered rows, which is the packing a production order needs
FinishNIPDAU, moisture level 1 at 260 C on the lettered rows, so there is no floor life clock
MarkingCFT on the SC70 row, three characters that identify the die and the gain together
StatusPlain string obsolete, lettered rows active, so the order code has to carry the letter

Where 80 kHz matters and where it does not

A motor control loop that closes at 10 kHz cannot use a 7 kHz monitor for its current feedback, because the amplifier is already rolling off inside the loop and the phase margin disappears. Gain 50 with 80 kHz of bandwidth is the row that fits, and the 10 mV full scale input still supports a shunt drop small enough to keep the dissipation low. That is the trade: the family gives up resolution to buy speed at the low gain end and the reverse at the high gain end.

Offset dominates at small signals and the 35 uV figure is the family best, so the low gain row is also the one that reads the smallest shunt drop without a chopper. Where a customer is moving between gains, our amplifier cross reference lists the six gains with bandwidth and offset side by side, and the obsolete part cross reference hub is where we record a plain string that has gone obsolete while its lettered rows stay active.

Buyer questions on the INA213AIDCKR

Why does the plain string show obsolete? The addendum lists it against a UQFN body that has been retired. The same die is active in the SC70 body under the lettered rows, so the part is available but the order code has to name the letter.

Is 50 V/V enough for a 10 A rail? With a 1 milliohm shunt, 10 A develops 10 mV and gives 500 mV at the output, which fits a 3.3 V converter. With a 5 milliohm shunt it does not, and the gain has to drop or the shunt has to shrink.

Does the part need a reference for bidirectional use? Yes. The REF pin sets the zero current output, so a mid rail reference gives plus and minus swing and a grounded REF gives one direction only.

Availability and ordering notes

Active stock sits on the lettered SC70 rows at 3000 pieces with NIPDAU and moisture level 1, marking CFT. Because the bare string is printed as obsolete, a quote that shows the bare string at a low price is usually a brokered reel of the retired UQFN body, which is a different footprint. We quote the lettered row, we read the body and the marking off the label, and the result is recorded in the sourcing audit trail.