INA196AQDBVRQ1
Product Specifications
INA196AQDBVRQ1
Texas Instruments — Power Management & Signal Chain
Product Overview
The INA196AQDBVRQ1 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
INA196AQDBVRQ1: the 20 V/V INA19x row in the alternative five pin order
The INA196AQDBVRQ1 is the 20 V/V member of the INA193 to INA198 family, in the pin arrangement used by the 196, 197 and 198 rows, supplied in the SOT-23 5 pin body on a 3000 piece reel. Electrically it is the same amplifier as the INA193: a common mode window from 16 V below ground to 80 V above it, a 2.7 V to 18 V supply, 900 uA maximum quiescent current, 500 kHz of bandwidth at gain 20 and a 3 percent total error limit over temperature. What differs is which pin carries what, and that difference decides whether an existing board can take the part at all.
The Q1 letter in this catalogue string needs a note. The published INA19x data sheet, SBOS307, covers the industrial rows only; it prints the INA196AIDBVR as active at 3000 pieces with NIPDAU and moisture level 2, and it does not print an automotive row for this family at all. The AEC-Q100 qualified current sense families from the same vendor are the INA190-Q1, INA199-Q1, INA21x-Q1 and INAx180-Q1, each with its own document. So a string with a Q1 suffix on an INA196 body is confirmed against the reel label and the vendor certificate per order rather than assumed from the family sheet.
Key data for the INA196AQDBVRQ1
| Gain | 20 V/V, with the 50 V/V and 100 V/V versions in the same family under the INA197 and INA198 names |
| Input | Common mode minus 16 V to plus 80 V, unidirectional sensing, independent of the 2.7 V to 18 V supply |
| Accuracy | 3 percent total output error maximum over temperature, covering gain error, offset and common mode error |
| Bandwidth | 500 kHz at gain 20 with a 5 pF load, 300 kHz at gain 50, 200 kHz at gain 100 |
| Supply | 2.7 V to 18 V, 900 uA maximum quiescent current, no shutdown pin on this body |
| Output | Voltage output, swing to within 50 mV of the positive rail and to ground through a 10 k load |
Body, marking and reel data
| Body | DBV, SOT-23 5 pin, 2.90 mm by 1.60 mm, same body as the rest of the family |
| Reel | 3000 pieces on a large reel, 250 pieces on the small reel T suffix |
| Finish | NIPDAU on the industrial rows, moisture level 2 at 260 C with a one year floor life |
| Marking | BJE on the INA196 industrial row, three characters that do not name the gain |
| Document | SBOS307G covers INA193 to INA198; the automotive rows of other current sense families live in separate sheets |
Pin order is the whole decision
Two parts that behave identically on the bench can still be incompatible on a board. The 193 and the 196 rows put supply, output and the two inputs on different pins, so a reel of the wrong variant is not a substitution, it is a scrap event. That matters in repair and in second sourcing: a service depot that has been told the family is interchangeable will fit the part, power the board and read a rail on the output pin.
The other decision is the error budget. Three percent over temperature is a trip threshold, not a measurement. For a welding supply or a breaker that only needs to know whether the current passed a limit, the part is the right answer and the 500 kHz bandwidth keeps the comparator response quick. For anything that has to report a number, the zero drift families are the correct route. Where a line is switching from one of these rows to the other, our pin to pin cross reference records the four pin functions side by side, and the incoming inspection plan page sets out the marking check we run before a reel reaches the line.
Buyer questions on the INA196AQDBVRQ1
Can an INA193 be used where an INA196 was specified? Only with a board change. The amplifier is the same, the pin order is not, so the part will not drop into the same land pattern. Check which pin carries the output before ordering a substitute.
Is this row automotive qualified? The family data sheet does not print an automotive row. A string with a Q1 suffix has to be confirmed against the vendor certificate and the reel label, and we do that per order rather than from the family document.
Why is the quiescent current so high? The family dates from a generation when 900 uA was cheap. In a mains powered chassis it is irrelevant; in a battery product it rules the part out unless the monitor is switched by an external FET.
Availability and ordering notes
The plain industrial string is active at 3000 pieces with moisture level 2, so the floor life clock starts when the bag is opened and a year old open reel needs a bake. The G4 string of the same family is the same die with a different order code. Where a customer's drawing calls out a Q1 suffix on this body, we ask for the certificate that came with the reel and we record the result in the sourcing audit trail so the next order does not repeat the question.