Contact Us

DRV8814PWPR

Brand: Texas Instruments
Texas Instruments DRV8814PWPR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

DRV8814PWPR — Power Management & Signal Chain | Superb Automation

DRV8814PWPR

Texas Instruments — Power Management & Signal Chain

Product Overview

The DRV8814PWPR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

DRV8814PWPR: two brushed DC channels at 47 V

The DRV8814PWPR is the 28-pin HTSSOP body of the DRV8814, a dual H-bridge driver for brushed DC motors. Each bridge carries 2.5 A peak and 1.75 A rms at 24 V and 25 C, the on resistance is 400 mOhm high side plus low side, and the supply range is 8 V to 45 V operating with 47 V absolute maximum. Where a stepper driver wants microstepping and a fine current loop, this part wants to turn two motors on and off with a current limit, which is what a printer, a scanner and an automated door actually need.

The interface is PH and EN per bridge, which is the industry standard parallel interface, so the controller drives direction and enable or PWM on four pins and nothing else has to be loaded. Each bridge has four levels of winding current control, so the torque can be set by pin strapping rather than by a resistor value, and the decay mode is selectable between slow and fast so a motor can brake or coast when the bridge is disabled.

Two details make the part easy to live with. The first is a built in 3.3 V reference output, which the current limit divider can use so the limit does not drift with the logic supply. The second is the sense architecture: the current regulation loop compares the voltage across an external sense resistor with a reference set by that divider, and the trip point is therefore a resistor choice rather than a register. The current limit function is what limits inrush when a motor starts against a load.

Sleep current is 10 microamps, which is high for a battery product and fine for a mains powered machine. Protection covers overcurrent, short circuit, undervoltage lockout, thermal shutdown and an nFAULT output. The operating temperature range is minus 40 C to plus 85 C, a narrower window than the newer members of the family, and that is a real constraint on a board that has to run in a hot enclosure.

Key data for the DRV8814PWPR

Operating supply8 V to 45 V, absolute maximum 47 V
OutputsTwo H-bridges, PH and EN interface, four level current control per bridge
Current2.5 A peak and 1.75 A rms per bridge at 24 V and 25 C
On resistance400 mOhm high side plus low side
DecaySlow decay or fast decay, selected by pin
ReferenceBuilt in 3.3 V reference output for the current limit divider
Sleep current10 microamps typical
ProtectionOvercurrent, short circuit, undervoltage lockout, thermal shutdown, nFAULT
TemperatureMinus 40 C to plus 85 C operating

Body, packing and marking data

Body28-pin HTSSOP, the PWP outline, 9.70 mm by 6.40 mm, 62 mm squared with a PowerPAD
CarrierTape and reel; the count per reel is read from the vendor addendum row for this order code
Finish and reflowRoHS, no antimony and no bromine in the mould compound, reflow profile per the vendor datasheet

Reading the code before you buy it

DRV8814 is the circuit, PWP is the 28-pin HTSSOP and the trailing R is the reel. The circuit drives brushed DC motors and is not a stepper driver, even though the package and the pin count look like the stepper parts in the same family. A drawing that expects microstepping will not get it from this order code, and a board built for a stepper driver will not drive two independent DC motors with the same interface.

The family around it is worth knowing. DRV8811, DRV8812, DRV8813 and DRV8814 share the 28-pin body and differ in drive current and interface, and the later DRV8840 and DRV8842 also share it. That means a 28-pin HTSSOP reel can be several different circuits, and the only reliable check at goods in is the full order code plus a functional test, not the package outline. Our supplier quality audit page describes the checks we run on a reel that arrives with a mixed marking.

One field note: the 85 C upper temperature is a hard limit for this part. A pump inside an enclosure that reaches 60 C ambient leaves only 25 C of rise for the junction, which at 1.75 A rms and 400 mOhm is tight. A board that needs margin above 85 C moves to the newer 125 C family.

Where the DRV8814PWPR fits

Printers and scanners use it for paper feed and for the carriage, where two brushed motors run at different speeds and the current limit protects the mechanism when paper jams. Office automation and vending machines use it for the shutter, the elevator and the dispenser, and there the four level current control is a way to run the motor at reduced torque when the mechanism is empty.

Doors, blinds and valve actuators use the slow and fast decay selection to brake a moving load rather than letting it coast, which is what a position requirement needs. Medical beds and dental chairs use the same pair of channels for lift and tilt, and there the 3.3 V reference output simplifies the limit setting because the divider runs from a stable source.

Where the part does not fit is any battery product that has to sit idle for months, because 10 microamps of sleep current is three orders of magnitude more than the newer parts. Our how to reduce component cost page covers the trade between this part and a newer driver when the sleep current matters and the budget is tight.

Questions we get on this code

How is the current limit set? By the voltage across the sense resistor compared with a reference set by the built in 3.3 V output through a divider. A 0.1 Ohm resistor and a 200 mV reference give 2 A, and the four level control gives a coarse selection of that reference rather than a continuous adjustment.

Can the two bridges be tied in parallel? The vendor does not publish a parallel mode for this part, unlike the dual H-bridge parts in the 16-pin family. A load above 2.5 A peak needs a different part, and the parallel mode has to be a documented feature rather than a wiring trick.

What is the inrush protection in the title? The current limit loop acts during start up and stall, so the motor current is held at the set point instead of rising to the supply limit. That is what protects the supply and the motor winding, and it is the same loop that sets the running current.

Why is the temperature range only 85 C? The part is built on an older process and the vendor does not publish a 125 C version of the same circuit. A hot environment needs the newer dual H-bridge parts or a driver with an external FET stage.