DRV3946QPWPRQ1
Product Specifications
DRV3946QPWPRQ1
Texas Instruments — Power Management & Signal Chain
Product Overview
The DRV3946QPWPRQ1 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
DRV3946QPWPRQ1: two automotive solenoids with current regulation and diagnostics
The DRV3946QPWPRQ1 drives two solenoids from an automotive rail and regulates their current in closed loop. It is aimed at the contactor relays in an EV battery junction box, at battery disconnect units and at proportional solenoids, which are all loads that need a pull in current, a hold current and a fast turn off through a clamp rather than a freewheel diode. Operating voltage reaches 28 V with a 40 V absolute maximum, and the part is qualified to AEC-Q100 grade 1 over minus 40 C to plus 125 C.
The output stage is a modified half bridge with 37 milliohm low side and 57 milliohm high side switches, which covers charging, recirculation and clamping with the same silicon. Each channel has an analog current feedback pin that reports the load current within 5 per cent, so a controller can close its own loop if the internal one is not wanted. Peak current, hold current and the timing between them are all register settings, and the PWM frequency can be set up to 20 kHz.
The part is built for functional safety. Systematic capability reaches ASIL D, hardware capability reaches ASIL C, and the vendor supplies documentation to support an ISO 26262 system file. Diagnostics include a built in self test, open and short load detection, loss of control detection while the driver is on and while it is off, and a redundant shut off path through an external high side switch.
Key data for the DRV3946QPWPRQ1
| Channels | Two solenoid drivers, each a modified half bridge with integrated clamp |
| Supply | Up to 28 V operating, 40 V absolute maximum |
| On resistance | 37 milliohm typical low side, 57 milliohm typical high side |
| Current sense | Plus or minus 5 per cent accuracy, analog output on a dedicated pin per channel |
| Control | Internal closed loop PWM with configurable peak and hold, or external duty and frequency control up to 20 kHz |
| Interface | Four wire addressable 24 bit SPI with CRC, broadcast commands accepted |
| Safety | AEC-Q100 grade 1, ASIL D systematic, ASIL C hardware, built in self test |
| Diagnostics | Open and short load detection, undercurrent, undervoltage, fault flag on a dedicated pin |
Body, packing and marking data
| Body | HTSSOP PWP, 28 pins, 9.7 mm by 4.4 mm, with the thermal pad underneath |
| Packing | 2500 pieces on a large reel, 330 mm carrier, marking 3946 |
| Finish | NIPDAU, moisture level 3, 260 C peak, 168 hour floor life |
| Temperature | Minus 40 C to plus 125 C ambient, which is the grade 1 window the automotive rows print |
Order code note before you place the string on a purchase order
The moisture level is the detail that catches assembly lines on this part. The published row prints level 3 with a 168 hour floor life, which means a reel that has been open for a week needs a bake before reflow. The same addendum prints a level value of 1 on one line of the header block, and that number does not belong to this row. Treat 168 hours as the real limit and plan the kit issue around it rather than around a full week of open time.
The other field to confirm is the grade. This is a grade 1 part over minus 40 C to plus 125 C, and the automotive qualification is what the Q1 suffix carries. A board that needs the full 150 C window cannot use this string, and a board that needs only 105 C should not pay for the qualification it is not using.
Where a dual solenoid driver earns its place
An EV battery junction box holds two contactors, one for each pole, and both have to close in a defined order, hold with a defined current and open with a clamp that dumps the coil energy quickly. Two channels in one body with a shared SPI bus and a shared external high side switch for redundant shut off is the arrangement the part was built around.
Battery disconnect units, power distribution boxes and active suspension actuators use the same two channel shape for the same reason. Our supplier quality audit page covers what to ask a source for on a part like this, and the incoming inspection plan page is where the moisture level and the date code check belong.
Questions we get on this code
The first question is whether both channels can share one external high side switch for redundant shut off. They can, and that is the intended arrangement, but the switch then becomes a single point that the safety case has to address. The vendor documents the shared switch case because it is the common one, not because it is free of argument.
The second question is about the SPI. The interface is addressable, so several devices can sit on one bus and each can be addressed individually, with broadcast commands going to all of them at once. That is what allows a two channel part to be used four times in a box without four chip selects, and it is also what makes an address conflict a configuration problem rather than a wiring problem.