Contact Us

CC2340R52E0RGER

Brand: Texas Instruments
Texas Instruments CC2340R52E0RGER is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

CC2340R52E0RGER — Power Management & Signal Chain | Superb Automation

CC2340R52E0RGER

Texas Instruments — Power Management & Signal Chain

Product Overview

The CC2340R52E0RGER from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

CC2340R52E0RGER: 2.4 GHz wireless MCU for Bluetooth LE 5.4 and 802.15.4 with 512 KB flash

CC2340R52E0RGER is a wireless microcontroller for short range radio products in a VQFN body of 24 pins. The part pairs a 48 MHz Cortex-M0+ core with a 2.4 GHz radio that covers Bluetooth LE 5.4, Zigbee, Thread and proprietary formats, and puts an integrated balun, a dc to dc converter and an AES accelerator in a 4 mm by 4 mm body that runs from 1.71 V to 3.8 V.

Order code and package

Order codeCC2340R52E0RGER
PackageVQFN, 24 pins, 4.00 mm by 4.00 mm
Core48 MHz Arm Cortex-M0+
Flash512 KB in system programmable
RAM and cache36 KB, retained in standby
Supply voltage1.71 V to 3.8 V
RadioBluetooth LE 5.4, Zigbee, Thread, proprietary
Junction temperatureminus 40 to plus 125 degrees Celsius

Electrical parameters that decide the application

Active current2.6 mA in CoreMark
Active current per MHz53 microamp per MHz
Standby current710 nA with RAM retained
Shutdown current165 nA, wake on pin
Receive current5.3 mA
Transmit current5.1 mA at 0 dBm, under 11.0 mA at plus 8 dBm
Sensitivityminus 102 dBm on the 125 kbps coded PHY
ADC12 bit, 1.2 Msps with an external reference, 267 ksps with the internal one

Points to check before this part goes on a BOM

710 nA of standby current with the RAM retained is 6.2 mAh over a year, which is small enough that the radio duty cycle and not the sleep current sets the battery life. A product that advertises once a second for 3 ms is at 0.3 percent duty and averages about 21 microamps from the transmitter alone, three times what the standby state costs.

Receiving costs 5.3 mA, so a link that listens one percent of the time already averages 53 microamps. Add 0.1 percent of transmit at 0 dBm and the total is about 58 microamps plus the sleep current, which on a 225 mAh coin cell is roughly 3900 hours, or 160 days, before the cell is flat. Every point of duty cycle traded for latency is worth more than any other current saving in the product.

Transmitting at plus 8 dBm costs under 11.0 mA against 5.1 mA at 0 dBm, so eight decibels of extra link budget costs a little more than twice the current, which is 6.3 times the radiated power. The high power setting is the right choice only at the edge of range; at short range it buys nothing and costs a third of the battery.

A 3.0 V coin cell has an internal resistance in the tens of ohms, so an 11 mA transmit pulse through 15 ohms drops 165 mV on the supply pin before the cell chemistry moves at all. The 1.71 V floor of the part leaves room for that sag, but the decoupling capacitor has to be close enough to supply the pulse, and a product that transmits from a nearly flat cell needs the brownout behaviour checked.

512 KB of flash against 36 KB of RAM is a ratio chosen for over the air updates: the new image has to be stored while the old one still runs, and 36 KB is enough for a network stack and a small buffer but not for staging an image. A product that needs OTA and a large sensor buffer is looking at the wrong member of the family, not at a bigger heap.

The 12 bit ADC runs at 1.2 Msps only with an external reference and drops to 267 ksps on the internal one. A product that samples a sensor at a few kilohertz is unaffected, but one that wants the fast rate has to bring a reference and a clean analogue supply, which is a BOM decision made early.

Junction temperature goes to plus 125 degrees, which is what allows the part in a sealed enclosure next to a power stage. The 4 mm body still has to get its heat into copper, and at 2.6 mA active plus 5.3 mA receive the dissipation is tens of milliwatts, so the limit is the ambient inside the product rather than the die.

The integrated balun removes the matching network between the radio and the antenna, but the antenna keep out area, the ground plane under it and the distance to the battery are still decided by the board. A module built around this part is only as good as the antenna it is paired with, and the certified range figures assume the reference antenna.

The 24-pin body does not bring out all 26 of the input and output pads the family offers, so a product that needs every peripheral pin has to move to the 40-pin package. That decision is made on the pin count in the first week of a project, and changing it later means a new board rather than a firmware change.

An AES-128 accelerator and a hardware random number generator are on chip, which is what makes a secure connection practical on a Cortex-M0+ at 48 MHz. A software implementation of the same cipher would dominate the active current, and the active current is already the largest term in a product that transmits often.

Twelve kilobytes of ROM hold the bootloader and the drivers, so a basic over the air update needs no external memory. The 512 KB of flash is what allows the new image to be staged while the old one still runs, and a 256 KB member of the same family cannot do that for a stack of any size.

Where this order code fits

Battery powered sensors, medical wearables, asset tags and building automation nodes that need Bluetooth LE with a mesh option and a supply that survives a coin cell are the applications for this part. Teams comparing it with a neighbouring part start from our Medical Device Components page, and teams replacing a part that has gone end of life start from the MCU Cross Reference page.

Questions buyers ask

Does it support both Bluetooth LE and Zigbee? The radio and the stacks cover Bluetooth LE 5.4, Zigbee, Thread and proprietary formats, so one order code can serve either a phone facing product or a mesh node; the choice is made in software and flash size, not in the part number.

Can it run from a single coin cell? The supply range of 1.71 V to 3.8 V covers a 3.0 V cell down to end of life without a boost converter, provided the transmit pulse current can be supplied locally, which is a matter of the cell resistance and the decoupling at the pin.

SUPERB holds and sources this line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a part is moving, the Component Lead Time Solutions page sets out the checks that keep a substitute from failing on the bench.