Contact Us

BQ298018RUGR

Brand: Texas Instruments
Texas Instruments BQ298018RUGR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

BQ298018RUGR — Power Management & Signal Chain | Superb Automation

BQ298018RUGR

Texas Instruments — Power Management & Signal Chain

Product Overview

The BQ298018RUGR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

BQ298018RUGR: high side protection with a charge pump driver

The BQ298018RUGR protects one cell from the high side. The FETs sit above the pack, between the cell positive and the pack positive, and the part drives their gates with a charge pump so the gate voltage stays above the cell voltage as the cell moves. The result is a constant on resistance across the whole discharge curve, which is what a fast charging product needs, because a low side protector at 3.0 V cell voltage has far less gate drive than the same part at 4.2 V.

Current is measured across a sense resistor rather than across the FETs, and the part is specified to work with a resistor as low as 1 milliohm. At 5 A that is 25 milliwatts in the sense element and 5 mV of signal, which the part resolves because the overcurrent comparators are trimmed to plus or minus 1 mV. Voltage protection is plus or minus 10 mV on overvoltage and plus or minus 20 mV on undervoltage, and the short circuit detector is accurate to plus or minus 5 mV.

The CTR pin is the feature a system engineer notices. It can override the FET driver from the host, which gives the product a way to force a system reset or a shutdown, or it can be configured to take an external positive temperature coefficient thermistor so the FETs are protected against overheating as well as the cell.

Key data for the BQ298018RUGR

FunctionSingle cell high side protection with an integrated charge pump FET driver
Overvoltage4.500 V, 1.00 second delay, accuracy plus or minus 10 mV
Undervoltage2.900 V, 20 millisecond delay, accuracy plus or minus 20 mV
Charge overcurrentMinus 18 mV, 8 millisecond delay, accuracy plus or minus 1 mV
Discharge overcurrent30 mV, 16 millisecond delay, accuracy plus or minus 1 mV
Short circuit40 mV, 250 microsecond delay, accuracy plus or minus 5 mV
Sense resistorDown to 1 milliohm
Temperature protectionFixed overtemperature trip, plus the CTR pin for an external thermistor
Zero volt chargingEnabled on the BQ2980 members
Supply current4 microamps normal, 0.1 microamps maximum in shutdown
PackageX2QFN, 8 pins, 1.5 mm square body, 1.69 mm land pattern
Ordering3000 pieces on a large tape and reel, moisture level 1 at 260 C, marking 12

High side against low side, in numbers

A low side protector puts the FETs between the cell negative and the pack negative. It is simple, and the gate drive is referenced to the pack negative, so it does not need a charge pump. The cost is that the cell negative moves away from the pack negative when the FETs open, which means the system sees a different ground reference in the protected and unprotected state, and any circuit that measures the cell directly has to account for it.

A high side protector keeps the cell negative and the pack negative tied together. The system ground does not move, the protection is invisible to the rest of the product, and the FETs can be driven with a gate voltage that is always above the cell. The second advantage is on resistance: an NFET needs several volts of gate to source to be fully on, and with the source at the pack positive, the charge pump supplies that regardless of the cell voltage. On a 3.0 V cell the low side part is already weak, and the high side part is unchanged.

The cost is the charge pump and the extra pin. On a part this small, the trade is worth it for any product that charges at more than 2 A or that measures the cell from a fixed ground.

Choosing a sense resistor of 1 milliohm

A 1 milliohm sense resistor at 5 A dissipates 25 milliwatts, which is nothing compared with the FET losses, and it gives 5 mV to the comparator. The part is trimmed to plus or minus 1 mV on the overcurrent comparators, so 5 mV is resolved with 20 per cent accuracy, which at 5 A is plus or minus 1 A. That sounds loose and it is the reason the vendor states the accuracy in millivolts rather than in per cent. A pack that needs a tighter current limit uses a larger resistor and accepts the loss.

The kelvin connection matters more at 1 milliohm than at 10. The voltage across the resistor is the same order as the voltage across a few millimetres of copper trace, so the sense lines have to be taken from the inside of the pads with a separate pair. A shared trace adds the copper temperature coefficient to the measurement and turns a stable limit into one that drifts with board temperature.

Where it fits in a build

Fast charging handsets, tablets and power banks are the applications named in the document, and any single cell product that measures the cell from a fixed ground fits the same profile. The 0 volt charging support also matters on a pack that may be shipped at zero volts.

When the protection device is the part that decides whether a pack passes incoming inspection, the supplier quality audit page covers what we check at the supplier before a reel is accepted.

The sourcing side of this part is covered on the incoming inspection plan. For a part whose marking separates two rows, that page covers the checks we run at the receiving dock.

Questions we get on this code

Can the CTR pin be used as a reset input? Yes, it can override the FET driver so the host forces the pack off. The polarity and the pull up have to match the configuration, so read the register description before wiring it to a processor pin.

Is a 1 milliohm resistor practical on a phone board? It is a wide, short copper element rather than a chip resistor, and it is placed in the current path with a kelvin pair. The part is specified for it, and the copper around it decides whether the accuracy survives.

Does the charge pump need an external capacitor? Yes, it needs a flying capacitor on the pins the document names. Omitting it leaves the gate drive weak and the on resistance high, which shows up as heat rather than as a failed test.

What is the difference between the 1.5 mm body and the 1.69 mm land pattern? The body is 1.5 mm square and the land pattern including the leads measures 1.69 mm. Both figures are printed in the document and they describe different things.