Contact Us

BQ29707DSER

Brand: Texas Instruments
Texas Instruments BQ29707DSER is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

BQ29707DSER — Power Management & Signal Chain | Superb Automation

BQ29707DSER

Texas Instruments — Power Management & Signal Chain

Product Overview

The BQ29707DSER from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

BQ29707DSER: a single cell protector with the thresholds fixed at the factory

The BQ29707DSER protects one Li-ion or Li-polymer cell. It drives the charge and discharge FETs, senses current across those FETs rather than across a separate shunt, and trips on overcharge, overdischarge, charge overcurrent, discharge overcurrent and load short circuit. It is the part at the bottom of a single cell pack, and it is expected to work for the life of the product with nothing to program and nothing to calibrate.

The numbers on this code are 4.280 V overcharge with a 1.25 second delay, 2.800 V overdischarge with a 96 millisecond delay, minus 90 mV charge overcurrent with a 6 millisecond delay, 90 mV discharge overcurrent with an 8 millisecond delay and a 0.5 V short circuit trip with a 250 microsecond delay. Overcurrent accuracy is plus or minus 5 mV typical, which is what makes a sense across the FETs usable at all.

The input range on the pack pin is minus 0.3 V to 12 V, the body is a 6 pin WSON and the part is rated minus 40 to 85 C. It draws almost nothing, which matters because it is powered from the cell it protects and a protector that drains the pack is a defect.

Key data for the BQ29707DSER

FunctionSingle cell voltage and current protection with FET drive
Overcharge4.280 V, 1.25 second delay
Overdischarge2.800 V, 96 millisecond delay
Charge overcurrentMinus 90 mV across the FETs, 6 millisecond delay
Discharge overcurrent90 mV across the FETs, 8 millisecond delay
Load short circuit0.5 V, 250 microsecond delay
Current accuracyPlus or minus 5 mV typical on the overcurrent sense
Pack input rangeMinus 0.3 V to 12 V
FET driveSeparate charge and discharge drive outputs
PackageWSON, 6 pins, DSE body, 1.75 mm by 1.75 mm
TemperatureMinus 40 to 85 C
Ordering250 pieces on a small reel on the plain row, marking F4

Two rows, two reel sizes, two markings

The plain BQ29707DSER row is listed at 250 pieces on a small tape and reel with marking F4. The .A row of the same string is listed at 3000 pieces on a large reel with marking F5. The body, the package and the electrical tables are the same, so the difference is carrier and marking, and the marking difference is what a line needs to know if it photographs parts for traceability.

That is a common pattern on small protection parts, and it catches buyers out because the string looks like one product. A purchase order that asks for 3000 pieces may come back as 12 small reels of the plain row, which is the same quantity in a carrier the line may not be set up for. Name the reel size, not just the quantity.

The 250 piece reel is the right choice for a prototype or a small build. It costs more per piece and it avoids a full reel going stale on a shelf while the board is still being evaluated.

Sensing across the FETs, and why the FET choice is part of the protection

This family measures the current by the voltage across the two series FETs. The threshold is a voltage, so the current it corresponds to depends on the on resistance of the FETs in the pack. A pair of FETs at 20 milliohms total gives 4.5 A at 90 mV, and a pair at 10 milliohms gives 9 A at the same threshold. The part has not changed, and the pack protection has.

That is why the FET is part of the protection specification rather than a purchasing detail. A second source FET with a lower on resistance raises every current trip point in the pack, and a protection file that names a current rather than a voltage is describing something the silicon does not do. Write the trip point as the sense voltage and let the FET selection follow.

Temperature moves the on resistance as well, up by roughly a third from 25 C to 85 C on a typical trench FET. The current trip therefore falls as the pack warms, which is the safe direction, but it also means a pack that trips at 4.5 A cold trips nearer 3.4 A hot.

Where it fits in a build

Phone packs, tablet packs, wearable packs and single cell power banks. Anything with one cell that needs a hard disconnect and no reporting. A pack that has to report capacity needs a gauge as well, and this part then handles the disconnect while the gauge handles the numbers.

When a second source is being considered for a cell protection device, the pin to pin cross reference page lists the pin, threshold and FET checks we run before calling two protectors equivalent.

The sourcing side of this part is covered on the component lead time solutions. For a small protection part that is quoted in weeks, that page sets out the stock and packaging checks we run first.

Questions we get on this code

Is the 96 millisecond overdischarge delay long enough to ride through a motor start? On a handset yes, on a power tool no. A tool that pulls a surge at start needs a longer delay, and a different code in the same family provides it.

Can the part be used with a single FET rather than two? The charge and discharge paths have separate drive outputs because the pack has to be able to block one direction while allowing the other. A single FET cannot do that, so the two FET arrangement is part of the function.

What happens on a hard short? The short circuit detector trips at 0.5 V across the FETs in 250 microseconds, which is fast enough to protect the FETs themselves rather than only the cell.

Does the marking matter for incoming inspection? It does if the line records it. F4 and F5 identify the reel size on this string, and a mismatch between the paperwork and the top of the part is worth a query before the reel goes on the machine.