Contact Us

BQ25616RTWR

Brand: Texas Instruments
Texas Instruments BQ25616RTWR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

BQ25616RTWR — Power Management & Signal Chain | Superb Automation

BQ25616RTWR

Texas Instruments — Power Management & Signal Chain

Product Overview

The BQ25616RTWR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

BQ25616: a 3 A buck charger with a 1.2 A boost for accessories

The BQ25616RTWR is a stand alone single cell charger that takes up to 3 A of charge current from a 1.5 MHz synchronous buck stage and turns around to supply 5 V at up to 1.2 A in the other direction for USB on the go. Charge efficiency is quoted at 92 per cent at 2 A from a 5 V input, and the boost side is quoted at 92 per cent at 1 A out.

The part is stand alone, which means no I2C and no host. Charge voltage is selected by the VSET pin between 4.1 V, 4.2 V and 4.35 V, and the current limits are set by resistors. That is what a speaker, a portable instrument or a medical handheld wants: a charger that works on the first power up, before any code is loaded, and keeps working if the processor hangs.

The power path is the standard four FET arrangement with an input reverse blocking FET, a high side switch, a low side switch and a battery FET. The reverse blocking FET is what allows the boost mode to work without back feeding the input, and what protects the input from the battery when the adapter is removed.

Key data for the BQ25616RTWR

FunctionStand alone single cell buck charger with power path and OTG boost
Charge currentUp to 3 A
Switching frequency1.5 MHz synchronous buck
Efficiency92 per cent at 2 A from a 5 V input, 92 per cent boost at 1 A out
Voltage accuracyPlus or minus 0.5 per cent, VSET selects 4.1 V, 4.2 V or 4.35 V at 0.4 per cent
Current accuracyPlus or minus 6 per cent charge current, 7.5 per cent input current
Boost output5 V at up to 1.2 A, soft start into 500 microfarads
Temperature profileJEITA on the BQ25616J, hot and cold suspend on the BQ25616
Timer10 hour charge safety timer
PackageWQFN, 24 pins, RTW body, 4 mm by 4 mm
TemperatureMinus 40 to 85 C operating

Body and ordering data

Two dies share the document, BQ25616 and BQ25616J, and the difference between them is the temperature profile. The BQ25616 uses a hot and cold suspend window. The BQ25616J uses a full JEITA profile with intermediate thresholds. Both are in the RTW body with 24 pins.

BQ25616RTWR is active and in production, WQFN RTW with 24 pins, 3000 pieces on a large tape and reel, NIPDAU finish, moisture level 1 at 260 C with no floor life limit, minus 40 to 85 C. The addendum text extract prints the J rows first with the quantity and finish columns on a line above the part number, so the top of the table looks like it is missing its status column. The plain string does have its own row further down.

Stand alone means the resistors are the specification

With no bus, every limit is a resistor. The charge current, the input current limit and the termination threshold are set by values on three pins, and the safety timer is internal. On a product with one adapter this is simpler and cheaper than an I2C part. On a product that charges from several sources, it means the input limit is set for the weakest source and the strong one is never used to its full capacity.

The 10 hour timer is the protection that a stand alone part cannot get from software. A cell that has failed short will hold the charger in constant current indefinitely without it, and the timer turns that into an event the user notices rather than one that runs to thermal shutdown.

Where it fits in a build

Portable speakers, industrial handhelds, medical portable devices and any product that has to charge with no software running. The boost mode adds value in a product with an accessory port, where the same connector has to source 5 V. The power management cross reference page lists the parts we compare on charge current and boost output.

A phone style product with a host and a variable adapter wants an I2C part instead. A product with a 2 cell pack is outside this family.

The sourcing side of this part is covered on the medical device components. For a portable device with a medical claim, that page covers the traceability and incoming inspection records those builds need.

Questions we get on this code

Is the boost available while charging? The two modes are exclusive in the register free version: the part is either charging from the input or boosting to the output.

What sets the 4.35 V option? The VSET pin, read at power up. A product that has to support two cell vendors can switch the pin with a GPIO, but not while a charge is in progress.

Why is the input current accuracy looser than the charge current? The input limit is set by the same sense element but includes the system load, so the tolerance covers a wider operating point.

Does the thermal loop limit 3 A? On a 4 mm by 4 mm QFN with a good pad, 3 A is reachable at room. In a sealed box at 60 C ambient, the loop will cut in and the charge will lengthen rather than fail.