Contact Us

BQ2022ADBZR

Brand: Texas Instruments
Texas Instruments BQ2022ADBZR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

BQ2022ADBZR — Power Management & Signal Chain | Superb Automation

BQ2022ADBZR

Texas Instruments — Power Management & Signal Chain

Product Overview

The BQ2022ADBZR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

BQ2022A: a one-wire EPROM that lives on the battery pack

The BQ2022A is a 1-Kbit one-time-programmable EPROM in a three-pin package with a single data line. There is no clock pin, no address bus and no separate supply pin: the DATA pin carries both the data and the power, so a pack harness needs one signal wire and one ground return. That is the whole reason the part exists. On a battery pack, a tool battery or a sealed module, every extra conductor in the harness is a failure point and a cost line, and this device removes all but one.

Inside the die there are three separate blocks. The user area is 1024 bits of OTP EPROM, written once and read for the life of the pack. The identification block is programmed at the factory and holds a unique serial number, an 8-bit CRC generator and the 8-bit family code 09h. The third block is a 64-bit status register that controls write protection and page redirection. A pack maker therefore gets a serial number that no other unit shares without programming anything, and a separate area for calibration constants, cycle counts as of the last service event, or a chemistry code that the charger reads before it sets a current.

The vendor document states the serial number in two different widths: the description calls it a 48-bit identification number, and the feature list calls it a 64-bit identification number. Both sentences describe this one device, and the difference matters if a host program is written against a fixed field width. Read the memory map section for the field the host program will actually parse rather than the headline.

Key data for the BQ2022A

Memory1024 bits of OTP EPROM, user programmable, one write per bit
Factory dataUnique identification number, 8-bit CRC generation, family code 09h
Status register64 bits, sets write protection and page redirection
InterfaceSDQ, one data line plus ground, no clock and no separate supply pin
Supply range2.65 V to 5.5 V on the data pin
Supply current20 microamps at 5.5 V, no standby current required
Output low0.4 V maximum, 4 mA sink at 5.5 V and 2 mA at 2.65 V
Programming voltage11.5 V to 12 V on the data pin, applied by the programmer only
ESD on the data pin15 kV, IEC 61000-4-2
TemperatureMinus 20 C to plus 70 C ambient

Body and ordering data

Body in this code3-pin SOT-23, 2.92 mm by 1.30 mm
Other body3-pin TO-92, 4.30 mm by 4.30 mm, for through hole packs
PinsSDQ, VSS and the third pin used for the programming contact
CarrierTape and reel, count per reel fixed by the vendor addendum row of the order code
DocumentSLUS724F, revised January 2022, production data

Reading the code before you buy it

BQ2022A is the circuit and the letters after it are the body and the packing. The DBZR string on this page is the 3-pin SOT-23 on a reel, and the TO-92 option is a separate string entirely. That is not a description difference: a pack assembly that was tooled for the SOT-23 footprint cannot take the TO-92 lead spacing, and a through hole pack cannot take the surface mount part without a new board.

The programming voltage is the second thing to plan. Writing a fresh part needs 11.5 V to 12 V applied to the data pin, which means the fixture at the pack line has to switch a 12 V rail onto a line that in normal operation never sees more than 5.5 V. A test fixture that only drives logic levels will read the factory serial number perfectly and fail on the first write. Our test coverage strategy page describes how we split that kind of fixture work between functional test and the programming station.

Page redirection deserves a note as well. The status register can point a page to a different physical page, which lets a pack maker retire a page that failed verification and keep the same logical address map. The host software then reads the same address and gets the replacement page. It is a small feature that saves a scrap decision on a sealed pack.

Where it fits in a build

The obvious use is a smart battery pack: the ID line runs to the pack contact, and the charger or the host reads the serial number, the chemistry code and the calibration constants before it applies current. The same part covers asset tags on rented instruments, revision tracking on a board that ships in several variants, and access code storage where a single wire has to be the only connection across a sealed enclosure. The vendor lists security encoding, inventory tracking, product revision maintenance and battery pack identification.

Because the part is OTP, the decision has to be made before the first write. A product that may still change its pack parameters wants a rewrite path, and an OTP part will not give one: the page redirect feature covers a failed page, not a changed value. That is the point where a buyer should choose between this part and a small serial EEPROM with a two-wire bus. Our memory cross reference page lists the pin and bus differences we check before offering an alternative.

Questions we get on this code

Can the host read it while the pack is charging? Yes, provided the host drives the data line through a resistor to its own rail. The device takes its power from the high level on that line, so a host that leaves the line floating or pulled low gets no answer and no damage.

How long does the stored data last? The document specifies the memory as OTP EPROM with a retention figure in the memory section, and the number that applies to a given pack depends on the write conditions and on the temperature the pack sees in service. For a pack that runs warm, that is the figure to check rather than the room temperature line.

Does the 15 kV ESD rating cover the pack contact? It covers the data pin against the IEC 61000-4-2 waveform. It does not turn the connector into a surge protected port, so a pack that a user can touch still needs its own protection at the contact.

Is a pull-up needed? The line has to be pulled to a rail inside the 2.65 V to 5.5 V window, and the value is set by the edge rate the host needs against the 20 microamp draw of the part. A 5 V host with a 10 k pull-up gives a slow rise on a long harness, and that shows up as read errors at the top of the temperature range rather than at room.