Contact Us

AMC60704YBHR

Brand: Texas Instruments
Texas Instruments AMC60704YBHR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AMC60704YBHR — Power Management & Signal Chain | Superb Automation

AMC60704YBHR

Texas Instruments — Power Management & Signal Chain

Product Overview

The AMC60704YBHR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

AMC60704YBHR four channel optical monitor and controller in a 36 ball DSBGA body

The AMC60704YBHR is an analogue front end for optical modules rather than a general purpose converter. One body carries four 12 bit current output converters with a 200 mA full scale range, four 12 bit voltage output converters with selectable plus and minus 5 V or plus and minus 2.5 V ranges, a 12 bit 1 MSPS successive approximation converter with four external inputs, a 2.5 V reference, supply and temperature alarms, and both a four wire SPI port and an I2C port. The intended load is an electro absorption modulated laser, where four bias currents and four modulator bias voltages have to be set and then watched.

The published file for this device is a product summary rather than a full data sheet. It carries the feature list, the description, the package drawing and the orderable addendum, and it does not print the electrical tables, the register map or the transfer function of each converter. That matters for a quotation, because the summary is enough to confirm the architecture and the package but not enough to sign off a tolerance budget. Any program that needs the missing numbers has to request the full document through the vendor portal, and we say so up front rather than quoting a range that is not printed anywhere.

Key parameters taken from the AMC60704YBHR document

Current output channelsFour, 12 bit, 200 mA full scale, with 300 mV of supply headroom at full scale
Voltage output channelsFour, 12 bit, selectable plus or minus 5 V, plus or minus 2.5 V, plus 2.5 V and plus 5 V ranges
Voltage output drivePlus or minus 50 mA source and sink, which is what allows direct modulator bias without a buffer
Monitor converter12 bit, 1 MSPS successive approximation, four external inputs on 2.5 V and 5 V ranges
Internal monitoringFour current output voltage monitors and four voltage output current monitors, so each channel can be read back
Sequencer and alarmsProgrammable sequencer with out of range alarms on the monitored channels
ReferenceInternal 2.5 V reference, with the accuracy figure carried in the full document rather than in the summary
Supply and temperature alarmsFault detection on the supply rails and on the die temperature, reported through the interrupt path
Serial portsFour wire SPI and I2C with four selectable target addresses, both operating from 1.7 V to 3.6 V
Temperature rangeMinus 40 to plus 125 C, specified over the full industrial range
BodyDSBGA 36 balls, 2.56 mm by 2.56 mm nominal
Order code factsAMC60704YBHR, DSBGA YBH 36 balls, 3000 pieces on a large reel, moisture level 1 with unlimited floor life, ball material SNAGCU
Typical useFour electro absorption modulated lasers biased from one body, with receive power monitoring on the spare converter inputs
Document statusPublic file is a summary with features, description, package and orderable rows only

The table above is read from the vendor document, not from a distributor summary. Where a window is printed, the window is what a production test should use, and the typical value is only a starting point for the first article.

Where the numbers matter in a real build

The 200 mA current output with 300 mV of headroom is the number that decides the supply rail, not the current itself. A laser bias of 200 mA needs a rail that is at least the laser forward voltage plus 300 mV at the top of the current range, and the drop across the internal pass device rises as the rail falls. On a 3.3 V rail the headroom is comfortable for a 2.2 V laser, and on a lower rail it is not. The summary prints the headroom at full scale, which is the worst case, and that is the figure to use when the rail is chosen.

The voltage channels are the reason this part suits a modulator rather than a simple laser driver. A modulator bias can be positive or negative with respect to the common node, and the four selectable ranges cover both polarities without an external inverter. The 50 mA drive means the bias network can be a resistive divider with some loading on it, and the channel can sink as well as source, which is what a modulator bias tee requires when the operating point drifts with temperature.

Reading back every channel is the part of the architecture that saves board space in a module. Each current output has a voltage monitor and each voltage output has a current monitor, both multiplexed into the same 1 MSPS converter that also measures four external points. In a module with four lasers, that removes the external multiplexer, the external reference divider and the separate housekeeping converter, and it removes the calibration step that goes with them, because the monitors sit inside the same body as the outputs.

The 36 ball DSBGA body is a module level package and it drives the assembly choices. It is a wafer level body with 0.4 mm pitch balls, it needs a stencil and a reflow profile that a module line already has, and it does not tolerate rework with a hand iron. Moisture level 1 with unlimited floor life is the useful part of the orderable row, because it means the reel can sit on a shelf without a bake step. A program that is used to a leaded body should price the stencil and the inspection step before it quotes the change.

  • Supply rail against the 300 mV headroom at 200 mA, with the highest laser forward voltage in the build.
  • Voltage channel polarity on first article, both ranges, with the modulator bias network connected.
  • Readback accuracy of the internal monitors against an external meter, per channel.
  • I2C address straps on the module, since four addresses share one body and one bus.
  • Reflow profile and ball collapse on a test coupon before the module panel is released.
  • Alarm behaviour when a supply rail is pulled down, and the interrupt path that reports it.

Which projects this part fits

This part fits optical transceiver modules, electro absorption modulated laser bias in metro and long haul links, optical amplifier control loops, laser diode bias in sensing instruments and any module that needs several bias outputs plus housekeeping monitoring in a small body. It is a telecom and datacentre part in practice, and it also appears in medical laser instruments and in test equipment where four bias channels have to be set and then verified. For customers building optical modules, the useful comparison is against a discrete set of current output converters plus a housekeeping converter, and the case for this part is board area and calibration time rather than unit price.

Questions that come up before a purchase order is released

Is the 200 mA range per channel or shared?

It is per channel, four independent current outputs each with a 200 mA full scale range. The supply has to be able to deliver the sum of the channels at their set points plus the quiescent current, so a module running four lasers at 100 mA each needs a rail sized for 400 mA plus margin, not for 200 mA.

Why is the electrical table missing from the public file?

Because the vendor publishes this device as a product summary. Features, description, package and orderable data are on the public file, and the electrical characteristics, the register map and the transfer functions are released with the full document. We state that plainly rather than quoting numbers from a distributor page, because a bias loop built on an unverified tolerance is a rework waiting to happen.

Can the voltage channels drive a modulator directly?

They can source and sink 50 mA, which covers most modulator bias networks, but the load has to be checked. A modulator bias tee presents a mostly resistive load in parallel with the modulator capacitance, and a capacitive load with a slow control loop is fine. What the channel cannot do is drive a low impedance load that draws more than 50 mA, and that case needs an external buffer.

What is the difference between the four I2C addresses?

The body answers on four selectable addresses, which lets four devices share one bus in a module with more than four channels. The address is strapped at the pins, so the module board decides it. In a system with several modules on one management bus, the addresses have to be planned before the boards are made, not after.

How is this part handled on a module line?

As a wafer level body with 0.4 mm pitch balls, moisture level 1, and no floor life limit. It is placed with the rest of the module and reflowed once, and it is inspected by X-ray or by an automated optical step because the balls are not visible after reflow. Rework is possible with a hot gas station and a localized stencil, but the yield on a 36 ball body at that pitch is not the same as on a leaded part.

How SUPERB handles this line

We supply the AMC60704YBHR from original reels with lot traceability, and because the public file is a summary we ask for the full document number before an engineering team commits to a bias loop. The ADC and DAC cross reference page lists the converter families we carry for optical and instrumentation work, the amplifier cross reference page covers the buffer and monitor parts that sit around them, and component lead time solutions is where we keep the alternatives when a module body is on allocation.