COMPONENTS Sourcing

MT41K256M16TW-107:P

The MT41K256M16TW-107:P is a 4Gb DDR3L SDRAM from Micron Technology, organized as 256M words x 16 bits with a peak data rate of 1866 MT/s (DDR3-1866). Operating at the low-voltage 1.35V DDR3L standard, it delivers the same 1866 MT/s bandwidth as standard 1.5V DDR3 while consuming approximately 20% less power. The double data rate architecture with 8n prefetch, 8 internal banks, and programmable CAS latency (CL13 at -107 speed) make it ideal for embedded systems, industrial controllers, FPGA processing cards, and networking equipment where high memory bandwidth meets thermal/power constraints. The industry-standard 96-ball FBGA package ensures compatibility across a broad ecosystem of DDR3 memory controllers.

W25Q128JVSIQ

The W25Q128JVSIQ is a 128Mbit (16MB) serial NOR Flash memory from Winbond, the industry's most widely deployed SPI Flash family. Featuring Quad SPI at 133 MHz (up to 532 Mbps effective throughput), dual/quad/QPI modes, 4KB uniform sector architecture, and a minimum 100,000 program/erase cycles with 20-year data retention, it serves as the go-to boot code storage for STM32, ESP32, nRF52, and virtually every MCU ecosystem. The industry-standard 8-pin SOIC 208-mil package ensures drop-in compatibility across millions of existing designs and rapid prototyping with breadboard-friendly footprints.

CVSS-945X-100.000

The CVSS-945X-100.000 is a 100MHz Voltage Controlled Crystal Oscillator (VCXO) from Crystek Corporation, delivering a True SineWave output with +5dBm drive into 50 ohms. Built on the CVSS-945 platform, this oscillator achieves a phase noise floor of -172.9 dBc/Hz at 1 MHz offset — corresponding to femtosecond-level integrated jitter. With 20ppm minimum APR pullability, sub-harmonic-free output, and a compact 9x14mm SMD package, it serves as a precision reference for PLL-based synthesizers, test equipment, radar systems, satcom transponders, and any application demanding ultra-low phase noise with voltage-controlled frequency adjustment.

HMC705LP4E

The HMC705LP4E is a low noise GaAs HBT programmable frequency divider from Analog Devices, capable of dividing any input frequency from 100 MHz to 6.5 GHz by any integer value from N=1 to N=17. With an ultra-low SSB phase noise floor of -153 dBc/Hz at 100 kHz offset, this prescaler enables high-performance, fast-settling PLL frequency synthesizer architectures used in radar, satcom, test equipment, and electronic warfare systems. The flexible single-ended or differential I/O, 5-bit parallel programming interface, and compact 4x4mm 24-QFN package make it a versatile building block for precision LO generation and clock distribution chains.

CGHV96050F2

MACOM CGHV96050F2 is a rf & microwave component designed for SATCOM Ground Terminals and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.

HYPER-RK3566-A-R10

The HYPER-RK3566-A-R10 is a Pico-ITX single board computer from IEI Integration, powered by the Rockchip RK3566 quad-core Cortex-A55 processor running at up to 1.8 GHz. Featuring 4GB LPDDR4 memory, 32GB eMMC storage, triple display support (HDMI 2.0 + LVDS + MIPI DSI), Gigabit Ethernet, USB 3.0, dual RS-232/485 serial ports, and optional WiFi 6 + Bluetooth 5.2, this ultra-compact 100mm x 72mm board is purpose-built for industrial IoT gateways, edge AI computing, digital signage, HMI panels, and embedded automation controllers. Android 12 and Debian 10 support ensure rapid software deployment across diverse application environments.

ADRV9009BBCZ

The ADRV9009BBCZ is a highly integrated dual RF transceiver from Analog Devices, combining dual independent transmitters, dual receivers, and dual observation receivers in a single 196-CSPBGA package. Covering 75 MHz to 6 GHz with up to 200 MHz receiver bandwidth and 450 MHz ORx bandwidth, it delivers the RF performance and integration needed for 3G/4G/5G base stations, TDD active antenna systems, and wideband phased-array applications. Integrated fractional-N synthesizers, DPD-ready observation paths, and JESD204B serial interface up to 12.3 Gbps simplify system design while maximizing power amplifier efficiency.

ADIS16470AMLZ

​ADIS16470AMLZ — Wide Dynamic Range MEMS Inertial Measurement Unit (IMU) Brand: Analog Devices | Package: 44-Ball BGA | Status: Production The ADIS16470AMLZ is a complete, miniature MEMS inertial measurement unit (IMU) from Analog Devices, integrating a triaxial digital gyroscope and a triaxial digital accelerometer to deliver six degrees of freedom (6 DoF) motion sensing. Each internal inertial sensor is built upon ADI’s industry‑leading iMEMS® technology and advanced signal‑conditioning circuitry, ensuring optimized dynamic performance. The device is fully factory‑calibrated for sensitivity, bias, alignment, and linear acceleration (gyroscope bias) across the full operating temperature range. Each sensor is paired with an independent dynamic compensation formula, providing precise and stable measurements under wide temperature variations and complex operating conditions. Compared to complex and expensive discrete solutions, the ADIS16470AMLZ offers a simple, cost‑effective way to integrate high‑accuracy multi‑axis inertial sensing into industrial systems.

KAQ100MQ250X ATC Capacitor 100pF 250V 0603

ATC/Kyocera-AVX KAQ100MQ250X is a 100pF RF/microwave ceramic capacitor with M tolerance, rated at 250V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ100MQ100X ATC Capacitor 100pF 100V 0603

ATC/Kyocera-AVX KAQ100MQ100X is a 100pF RF/microwave ceramic capacitor with M tolerance, rated at 100V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ100MQ50X ATC Capacitor 100pF 50V 0603

ATC/Kyocera-AVX KAQ100MQ50X is a 100pF RF/microwave ceramic capacitor with M tolerance, rated at 50V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ100KQ250X ATC Capacitor 100pF 250V 0603

ATC/Kyocera-AVX KAQ100KQ250X is a 100pF RF/microwave ceramic capacitor with K tolerance, rated at 250V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ100KQ100X ATC Capacitor 100pF 100V 0603

ATC/Kyocera-AVX KAQ100KQ100X is a 100pF RF/microwave ceramic capacitor with K tolerance, rated at 100V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ100KQ50X ATC Capacitor 100pF 50V 0603

ATC/Kyocera-AVX KAQ100KQ50X is a 100pF RF/microwave ceramic capacitor with K tolerance, rated at 50V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ100JQ250X ATC Capacitor 100pF 250V 0603

ATC/Kyocera-AVX KAQ100JQ250X is a 100pF RF/microwave ceramic capacitor with J tolerance, rated at 250V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ100JQ100X ATC Capacitor 100pF 100V 0603

ATC/Kyocera-AVX KAQ100JQ100X is a 100pF RF/microwave ceramic capacitor with J tolerance, rated at 100V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ100JQ50X ATC Capacitor 100pF 50V 0603

ATC/Kyocera-AVX KAQ100JQ50X is a 100pF RF/microwave ceramic capacitor with J tolerance, rated at 50V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ910MQ250X ATC Capacitor 91pF 250V 0603

ATC/Kyocera-AVX KAQ910MQ250X is a 91pF RF/microwave ceramic capacitor with M tolerance, rated at 250V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ910MQ100X ATC Capacitor 91pF 100V 0603

ATC/Kyocera-AVX KAQ910MQ100X is a 91pF RF/microwave ceramic capacitor with M tolerance, rated at 100V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ910MQ50X ATC Capacitor 91pF 50V 0603

ATC/Kyocera-AVX KAQ910MQ50X is a 91pF RF/microwave ceramic capacitor with M tolerance, rated at 50V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ910KQ250X ATC Capacitor 91pF 250V 0603

ATC/Kyocera-AVX KAQ910KQ250X is a 91pF RF/microwave ceramic capacitor with K tolerance, rated at 250V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ910KQ100X ATC Capacitor 91pF 100V 0603

ATC/Kyocera-AVX KAQ910KQ100X is a 91pF RF/microwave ceramic capacitor with K tolerance, rated at 100V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ910KQ50X ATC Capacitor 91pF 50V 0603

ATC/Kyocera-AVX KAQ910KQ50X is a 91pF RF/microwave ceramic capacitor with K tolerance, rated at 50V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ910JQ250X ATC Capacitor 91pF 250V 0603

ATC/Kyocera-AVX KAQ910JQ250X is a 91pF RF/microwave ceramic capacitor with J tolerance, rated at 250V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ910JQ100X ATC Capacitor 91pF 100V 0603

ATC/Kyocera-AVX KAQ910JQ100X is a 91pF RF/microwave ceramic capacitor with J tolerance, rated at 100V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ910JQ50X ATC Capacitor 91pF 50V 0603

ATC/Kyocera-AVX KAQ910JQ50X is a 91pF RF/microwave ceramic capacitor with J tolerance, rated at 50V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ900MQ250X ATC Capacitor 90pF 250V 0603

ATC/Kyocera-AVX KAQ900MQ250X is a 90pF RF/microwave ceramic capacitor with M tolerance, rated at 250V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ900MQ100X ATC Capacitor 90pF 100V 0603

ATC/Kyocera-AVX KAQ900MQ100X is a 90pF RF/microwave ceramic capacitor with M tolerance, rated at 100V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ900MQ50X ATC Capacitor 90pF 50V 0603

ATC/Kyocera-AVX KAQ900MQ50X is a 90pF RF/microwave ceramic capacitor with M tolerance, rated at 50V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ900KQ250X ATC Capacitor 90pF 250V 0603

ATC/Kyocera-AVX KAQ900KQ250X is a 90pF RF/microwave ceramic capacitor with K tolerance, rated at 250V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ900KQ100X ATC Capacitor 90pF 100V 0603

ATC/Kyocera-AVX KAQ900KQ100X is a 90pF RF/microwave ceramic capacitor with K tolerance, rated at 100V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ900KQ50X ATC Capacitor 90pF 50V 0603

ATC/Kyocera-AVX KAQ900KQ50X is a 90pF RF/microwave ceramic capacitor with K tolerance, rated at 50V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ900JQ250X ATC Capacitor 90pF 250V 0603

ATC/Kyocera-AVX KAQ900JQ250X is a 90pF RF/microwave ceramic capacitor with J tolerance, rated at 250V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ900JQ100X ATC Capacitor 90pF 100V 0603

ATC/Kyocera-AVX KAQ900JQ100X is a 90pF RF/microwave ceramic capacitor with J tolerance, rated at 100V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ900JQ50X ATC Capacitor 90pF 50V 0603

ATC/Kyocera-AVX KAQ900JQ50X is a 90pF RF/microwave ceramic capacitor with J tolerance, rated at 50V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ820MQ250X ATC Capacitor 82pF 250V 0603

ATC/Kyocera-AVX KAQ820MQ250X is a 82pF RF/microwave ceramic capacitor with M tolerance, rated at 250V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ820MQ100X ATC Capacitor 82pF 100V 0603

ATC/Kyocera-AVX KAQ820MQ100X is a 82pF RF/microwave ceramic capacitor with M tolerance, rated at 100V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ820MQ50X ATC Capacitor 82pF 50V 0603

ATC/Kyocera-AVX KAQ820MQ50X is a 82pF RF/microwave ceramic capacitor with M tolerance, rated at 50V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ820KQ250X ATC Capacitor 82pF 250V 0603

ATC/Kyocera-AVX KAQ820KQ250X is a 82pF RF/microwave ceramic capacitor with K tolerance, rated at 250V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.

KAQ820KQ100X ATC Capacitor 82pF 100V 0603

ATC/Kyocera-AVX KAQ820KQ100X is a 82pF RF/microwave ceramic capacitor with K tolerance, rated at 100V, in 0603 surface-mount package — part of the KAQ automotive-grade MLCC family with AEC-Q200 qualification, designed for 77GHz ADAS radar, 5.9GHz V2X communication, and in-vehicle RF systems requiring zero-field-failure reliability. Manufactured by ATC (American Technical Ceramics, now part of Kyocera-AVX) in ISO 9001 and AS9100 certified facilities in the United States.