100C431JW1500X KYOCERA AVX RF Capacitor
Product Specifications
PRODUCT SPECIFICATIONS
100C431JW1500X — KYOCERA AVX RF/Microwave Capacitor
Product Overview
The 100C431JW1500X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
Technical Specifications
| Part Number | 100C431JW1500X |
| Manufacturer | KYOCERA AVX |
| Frequency Range | GHz / Microwave (Series Dependent) |
| Q Factor | High Q (Series Dependent) |
| RF Suitable | YES |
| High Q | YES |
| Low Loss | YES |
| Tolerance | Refer to datasheet |
| Package / Case Style | Refer to datasheet |
| Dielectric Material | Refer to datasheet |
| Temperature Coefficient | Refer to datasheet |
| Operating Temperature Range | Refer to datasheet |
| Termination Finish | Refer to datasheet |
| Mounting Type | Surface Mount (SMD/SMT) |
| RoHS Compliance | RoHS Compliant |
| REACH Compliance | REACH Compliant |
| Country of Origin | United States |
| Manufacturer Part Number | 100C431JW1500X |
| Data Confidence | Series Based |
| Verification Note | Requires ATC datasheet confirmation |
Key Features
- High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
- Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
- RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
- Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
- Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.
Applications
- RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
- Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
- Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
- Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
- Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.
Compatible and Alternative Part Numbers
- Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
- Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
- Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)
About KYOCERA AVX
KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.
About Superb Automation — Trusted KYOCERA AVX Supplier
Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.
Why Source 100C431JW1500X from Superb Automation?
- Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
- Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
- Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
- Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
- One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
- Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
- Global Logistics — International shipping with full export documentation.
Ordering Information
To order 100C431JW1500X or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com
100C431JW1500X: 430 pF at 1500 V in the case C body
Nothing in the order code is decoration. The first three characters name the series and the case, 100 for the porcelain Superchip series and C for the case. Then come 431 for the capacitance, J for plus or minus 5 percent, W for the termination, 1500 for the working voltage and X for laser marking, with the packing left to the mechanical configuration table. A value in another case is another order code, and the case is what sets the current the body can pass before anything else changes.
Inside the 5.84 mm by 6.35 mm C case sits a porcelain multilayer stack, the construction that gives this series its current and voltage capability in a body this size. The drawing carries plus 0.51 or minus 0.25 mm on the 5.84 mm side and plus or minus 0.38 mm on the 6.35 mm side, which is what a land pattern has to allow for. Q is not a single number here: the data sheet plots it against capacitance at 30, 150, 500 and 1000 MHz, so a 1 pF member and a 2400 pF member sit on two different parts of the same curve. The W termination is tin and lead solder over a nickel barrier, a lead bearing finish, and the marking is laser rather than ink.
| Series and case | 100C, case C, 5.84 mm by 6.35 mm, the .250 inch square body |
| Capacitance | 430 pF, code 431 |
| Tolerance | J, plus or minus 5 percent, a window of 21.5 pF around the marked value |
| Working voltage | 1500 VDC, 1060 V RMS at 0.707 times the DC rating |
| Withstanding voltage | 1800 V for five seconds, 120 percent of the working voltage |
| Life test | 1500 V for 2000 hours at 125 degrees C, 100 percent of the working voltage |
| Temperature coefficient | +90 plus or minus 30 ppm per degree C from minus 55 to plus 125 degrees C |
| Operating range | minus 55 to plus 125 degrees C with no derating of the working voltage |
| Insulation resistance | 10^5 Mohm minimum at 25 degrees C and 10^4 Mohm minimum at 125 degrees C, measured at a maximum of 500 VDC whatever the rating |
| Leakage floor | 15.0 nA at 1500 V at 25 degrees C and 150 nA at 125 degrees C, from the resistance floors |
| Stored energy | 484 microjoule at the working voltage, from one half C V squared |
| Reactance at 500 MHz | 0.74 ohm nominal |
| Series resonance | plotted against capacitance for the series; the part is inductive above it |
| Quality factor | ESR and Q curves at 30, 150, 500 and 1000 MHz |
| Termination | W, tin and lead solder plated over a nickel barrier, a lead bearing finish |
| Marking and packing | laser marking; no packaging letter on this code, so the packing is read from the mechanical configuration table, tape and reel or a tray of 180 pieces |
| Terminal strength | 10 lbs minimum, 20 lbs typical, for five seconds, MIL-STD-202 method 211 |
| Environmental schedule | thermal shock method 107 condition A, moisture resistance method 106, low voltage humidity method 103 at 1.5 VDC, 85 degrees C and 85 percent relative humidity for 240 hours |
| Stability | aging effects none, piezoelectric effects none, retrace and capacitance drift both under 0.02 percent or 0.02 pF, whichever is greater |
| Current rating basis | a 65 degrees C mounting surface with 15 degrees C per watt of thermal resistance, so 4 W of dissipation brings the case to 125 degrees C |
What 430 pF does from 30 MHz to 1 GHz
At 30 MHz this 430 pF body presents 12.3 ohm, at 150 MHz 2.47 ohm, at 500 MHz 0.740 ohm and at 1 GHz 0.370 ohm. At 150 MHz a body this size is 2.47 ohm and at 30 MHz it is 12.3 ohm, so it is already a low impedance across the VHF band and a genuine short at the bottom of it. A bypass is bought for that, and the question that decides whether it survives is the current the case can carry at the frequency of the stage rather than the tolerance on the value.
Tolerance is easier to judge in reactance than in picofarads. At 150 MHz this 430 pF body presents 2.47 ohm. The J window of 21.5 pF moves that to 2.35 ohm at 452 pF and to 2.60 ohm at 408 pF, a spread of 0.247 ohm, which is 10.03 percent of the nominal reactance. Against a 50 ohm line the larger reading is 0.05 of the line impedance, so the window is invisible in the match and the question at this value is current rather than tolerance.
A high Q porcelain body is bought for what it does to loss rather than for what it does to capacitance. At 430 pF and 500 MHz the reactance is 0.74 ohm, so a Q of a few hundred and an ESR of a fraction of an ohm put most of the loss in the metal rather than in the dielectric, and that is why the series is offered for plasma chambers, MRI coils and VHF and UHF power amplifiers. The same body in a bypass position is chosen for the current it can take, not for its Q.
Where a 430 pF case C part is chosen
The bypass and DC blocking positions are where a part this size earns its place: the return path under a radio frequency power stage, the blocking element ahead of a bias tee, the shunt arm of a low pass filter, and the decoupling of a supply feed into a chamber or a coil. The value is large enough that the reactance at 150 MHz is a fraction of a 50 ohm line, so the part behaves as a short in the band and the tolerance stops being the first question. What limits it is the current the body can carry and the voltage the stage stands on it, which is why the 1500 V rating and the 120 percent withstanding test come first.
1500 V is above the 1250 V break. Five seconds at 1800 V covers the withstanding requirement, and 2000 hours at 1500 V at 125 degrees C covers the life test. The same body at 1000 V would be tested at 150 percent and at 500 V at 250 percent, so the multiple on the certificate says which band the part was bought in rather than how it was built. At the rating this part leaks 15.0 nA at 25 degrees C and 150 nA at 125 degrees C, so on a 1 Mohm node that floor alone is 150 mV of offset at the higher temperature, and the bias network has to be able to absorb it.
Questions that arrive with a shortage quote
Can the J code be swapped for another grade on a shortage? The body is the same ceramic and the code is a sort, so the question is only how much window the circuit can absorb. At 430 pF the J window is 21.5 pF, the next grade tighter is G at 2 percent and the next grade looser is K at 10 percent. At 500 MHz that window moves the reactance between 0.71 ohm at 451.5 pF and 0.78 ohm at 408.5 pF, so on an impedance match or a filter the code has to be held, while on a bypass position it is invisible. We quote the code on the order and we state on the quotation the code we can actually ship, so the two never get mixed on the line.
How is the withstanding test set at 1500 V? The series rule steps down with voltage: 250 percent up to 500 V, 150 percent up to 1250 V, and 120 percent above that. At 1500 V the test is 1800 V for five seconds, and the life test applies 100 percent of the working voltage for 2000 hours at 125 degrees C, which is 1500 V. A 2500 V or 1500 V part therefore carries a smaller test multiple, not a weaker body, and the number to work against in a circuit is the working voltage rather than the test level.
What has to be on the certificate? Three things that a broker line often leaves off: the date code and the lot, the measured capacitance at 1 MHz with the test fixture stated, and the finish, because the tin and lead option is lead bearing and a restricted build cannot take it without a deviation. A 430 pF part at 1500 V also has to carry its sorting code on the paperwork, since the value alone does not tell the line which window arrived. This code has no packing letter, so the tray or reel decision has to be written on the order, and the count on the label has to match the count on the reel.
What to send with an enquiry
A quotation for this part needs four things from the buyer: quantity, target date, the complete order code including the tolerance and finish letters, and the packing the line can accept. Send the whole string and we check it against the current revision, then confirm date codes, packing and country of origin on the quotation. The Date Code Management page sets out how date codes and lot numbers are recorded and shipped, the Incoming Inspection Plan page sets out what is measured when a lot arrives, and the One Stop BOM Sourcing page sets out how a mixed bill is quoted line by line.