Contact Us

100C391JW1500X KYOCERA AVX RF Capacitor

Brand: ATC
The 100C391JW1500X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
quote now

Product Specifications

PRODUCT SPECIFICATIONS

100C391JW1500X — KYOCERA AVX RF/Microwave Capacitor

Product Overview

The 100C391JW1500X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.

Technical Specifications

Part Number100C391JW1500X
ManufacturerKYOCERA AVX
Frequency RangeGHz / Microwave (Series Dependent)
Q FactorHigh Q (Series Dependent)
RF SuitableYES
High QYES
Low LossYES
ToleranceRefer to datasheet
Package / Case StyleRefer to datasheet
Dielectric MaterialRefer to datasheet
Temperature CoefficientRefer to datasheet
Operating Temperature RangeRefer to datasheet
Termination FinishRefer to datasheet
Mounting TypeSurface Mount (SMD/SMT)
RoHS ComplianceRoHS Compliant
REACH ComplianceREACH Compliant
Country of OriginUnited States
Manufacturer Part Number100C391JW1500X
Data ConfidenceSeries Based
Verification NoteRequires ATC datasheet confirmation

Key Features

  • High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
  • Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
  • RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
  • Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
  • Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.

Applications

  • RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
  • Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
  • Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
  • Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
  • Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.

Compatible and Alternative Part Numbers

  • Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
  • Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
  • Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)

About KYOCERA AVX

KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.

About Superb Automation — Trusted KYOCERA AVX Supplier

Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.

Why Source 100C391JW1500X from Superb Automation?

  1. Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
  2. Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
  3. Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
  4. Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
  5. One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
  6. Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
  7. Global Logistics — International shipping with full export documentation.

Ordering Information

To order 100C391JW1500X or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com

100C391JW1500X: 390 pF at 1500 V in the case C body

Read the string from the left and every character is a decision that was made before the order. 100 is the porcelain Superchip series, C is the case, 391 is the capacitance code in the EIA system where the first two digits are the significant figures and the third is the number of zeros, J is the tolerance code at plus or minus 5 percent, W is the termination code, 1500 is the working voltage, X is laser marking, and the packing is set by the mechanical configuration table. The same capacitance in another case is a different order code, and the case change moves the current rating before it moves anything else.

The body is a high density porcelain multilayer chip in the C case, 5.84 mm by 6.35 mm with a plus 0.51 or minus 0.25 mm tolerance on one side and plus or minus 0.38 mm on the other, built for high radio frequency current and voltage rather than for density. The data sheet publishes no single Q line for the series, because the number moves with capacitance: Q and ESR are curves at 30, 150, 500 and 1000 MHz, and those curves are what a high power stage is checked against. The W finish is tin and lead solder plated over a nickel barrier, so it is lead bearing and a restricted build needs a deviation to use it. Marking is laser, so the value survives a solvent clean.

Series and case100C, case C, 5.84 mm by 6.35 mm, the .250 inch square body
Capacitance390 pF, code 391
ToleranceJ, plus or minus 5 percent, a window of 19.5 pF around the marked value
Working voltage1500 VDC, 1060 V RMS at 0.707 times the DC rating
Withstanding voltage1800 V for five seconds, 120 percent of the working voltage
Life test1500 V for 2000 hours at 125 degrees C, 100 percent of the working voltage
Temperature coefficient+90 plus or minus 30 ppm per degree C from minus 55 to plus 125 degrees C
Operating rangeminus 55 to plus 125 degrees C with no derating of the working voltage
Insulation resistance10^5 Mohm minimum at 25 degrees C and 10^4 Mohm minimum at 125 degrees C, measured at a maximum of 500 VDC whatever the rating
Leakage floor15.0 nA at 1500 V at 25 degrees C and 150 nA at 125 degrees C, from the resistance floors
Stored energy439 microjoule at the working voltage, from one half C V squared
Reactance at 500 MHz0.82 ohm nominal
Series resonanceplotted against capacitance for the series; the part is inductive above it
Quality factorESR and Q curves at 30, 150, 500 and 1000 MHz
TerminationW, tin and lead solder plated over a nickel barrier, a lead bearing finish
Marking and packinglaser marking; no packaging letter on this code, so the packing is read from the mechanical configuration table, tape and reel or a tray of 180 pieces
Terminal strength10 lbs minimum, 20 lbs typical, for five seconds, MIL-STD-202 method 211
Environmental schedulethermal shock method 107 condition A, moisture resistance method 106, low voltage humidity method 103 at 1.5 VDC, 85 degrees C and 85 percent relative humidity for 240 hours
Stabilityaging effects none, piezoelectric effects none, retrace and capacitance drift both under 0.02 percent or 0.02 pF, whichever is greater
Current rating basisa 65 degrees C mounting surface with 15 degrees C per watt of thermal resistance, so 4 W of dissipation brings the case to 125 degrees C

What 390 pF does from 30 MHz to 1 GHz

At 30 MHz this 390 pF body presents 13.6 ohm, at 150 MHz 2.72 ohm, at 500 MHz 0.816 ohm and at 1 GHz 0.408 ohm. The 500 MHz reading of 0.816 ohm is 0.02 percent of a 50 ohm line, so the value behaves as a return path rather than an element of the match. Above series resonance that stops being true, which is why the resonance curve for the series is the second thing to check after the reactance.

Tolerance is easier to judge in reactance than in picofarads. At 150 MHz this 390 pF body presents 2.72 ohm. The J window of 19.5 pF moves that to 2.59 ohm at 410 pF and to 2.86 ohm at 370 pF, a spread of 0.273 ohm, which is 10.03 percent of the nominal reactance. Against a 50 ohm line the larger reading is 0.06 of the line impedance, so the window is invisible in the match and the question at this value is current rather than tolerance.

Termination strength is part of the specification and not a footnote: 10 lbs minimum and 20 lbs typical for five seconds in the direction perpendicular to the termination surface, tested to MIL-STD-202 method 211. On a 390 pF part that matters less than the current, but on the same case size at the top of the capacitance range it is the termination that fails first, which is why the figure is quoted for the series rather than per value.

Where a 390 pF case C part is chosen

A 390 pF body in this case is bought for a bypass or a DC block in a high power radio frequency stage, and the two numbers that decide whether it survives are the working voltage and the current the case can pass at the frequency of the stage. The data sheet gives the second as a chart at 150 and 500 MHz, drawn on a 65 degrees C mounting surface with 15 degrees C per watt, so 4 W of dissipation puts the case at 125 degrees C. The J tolerance code then sets how far the impedance at the band edge can drift from build to build.

The 1500 V rating places this part in the top band of the series, above the 1250 V break. The withstanding test is 120 percent of the rating, 1800 V for five seconds, and the life test runs at 100 percent, 1500 V, for 2000 hours at 125 degrees C. A 1000 V member of the same body carries a 150 percent test and a 500 V member 250 percent, so the multiple identifies the band and not the construction. At the rating this part leaks 15.0 nA at 25 degrees C and 150 nA at 125 degrees C, so on a 1 Mohm node that floor alone is 150 mV of offset at the higher temperature, and the bias network has to be able to absorb it.

Questions that arrive with a shortage quote

Can the J code be swapped for another grade on a shortage? The body is the same ceramic and the code is a sort, so the question is only how much window the circuit can absorb. At 390 pF the J window is 19.5 pF, the next grade tighter is G at 2 percent and the next grade looser is K at 10 percent. At 500 MHz that window moves the reactance between 0.78 ohm at 409.5 pF and 0.86 ohm at 370.5 pF, so on an impedance match or a filter the code has to be held, while on a bypass position it is invisible. We quote the code on the order and we state on the quotation the code we can actually ship, so the two never get mixed on the line.

How is the withstanding test set at 1500 V? The series rule steps down with voltage: 250 percent up to 500 V, 150 percent up to 1250 V, and 120 percent above that. At 1500 V the test is 1800 V for five seconds, and the life test applies 100 percent of the working voltage for 2000 hours at 125 degrees C, which is 1500 V. A 2500 V or 1500 V part therefore carries a smaller test multiple, not a weaker body, and the number to work against in a circuit is the working voltage rather than the test level.

What has to be on the certificate? Three things that a broker line often leaves off: the date code and the lot, the measured capacitance at 1 MHz with the test fixture stated, and the finish, because the tin and lead option is lead bearing and a restricted build cannot take it without a deviation. A 390 pF part at 1500 V also has to carry its sorting code on the paperwork, since the value alone does not tell the line which window arrived. This code has no packing letter, so the tray or reel decision has to be written on the order, and the count on the label has to match the count on the reel.

What to send with an enquiry

Four fields decide the price and the date: quantity, target date, the full order code with the tolerance and termination letters, and the packing the line accepts. Send the whole string and we check it against the current revision, then confirm date codes, packing and country of origin on the quotation. The Component Lead Time Solutions page covers the second source route when a value is on allocation, the BOM Shortage Recovery page covers the shortage route when one line item stops a build, and the Component Traceability Report page sets out what a lot record has to carry.