Contact Us

ADG1212YCPZ-500RL7

Brand: Analog Devices
Analog Devices ADG1212YCPZ-500RL7 is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADG1212YCPZ-500RL7 — Analog & Mixed-Signal ICs | Superb Automation

ADG1212YCPZ-500RL7

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADG1212YCPZ-500RL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

ADG1212YCPZ-500RL7: the quad SPST in a 3 mm LFCSP on a 500 piece reel

The ADG1212YCPZ-500RL7 is the ADG1212 quad SPST supplied in the 3 mm by 3 mm LFCSP and packed on a 500 piece reel. The die is the same one as the TSSOP order code: 1 pF off capacitance, 2.6 pF on, below 1 pC of charge injection, 120 ohm on resistance, 33 V total supply, 3 V logic compatible. What changes with the suffix is the footprint, the thermal path and the way the part is fed to the placement machine.

Published values

ParameterValue
Configurationfour independent SPST switches
Package3 mm x 3 mm LFCSP, 16 terminals
Reel500 pieces
Off capacitance1 pF
Charge injectionbelow 1 pC
On resistance120 ohm
Supply33 V total range
Logic3 V compatible, no VL supply required

What the LFCSP buys and what it costs

The LFCSP is roughly a third of the board area of the 16-lead TSSOP and has a much shorter lead inductance, which matters on a 33 V analog node. The price is the exposed pad: it has to be soldered to a copper area connected to the correct net, and the paste stencil needs an aperture pattern that does not leave voids under the pad. A board that reflows an LFCSP with a plain rectangular aperture will pass first article and fail in the field on thermal cycling.

The other cost is inspection. The leadless terminals are under the body, so the joint cannot be seen. For a product that needs visual inspection of every joint, the TSSOP order code is the right choice even at the cost of area.

Why a 500 piece reel matters to a schedule

Reel quantity decides how a line is loaded. A 500 piece reel suits a pilot build or a low volume instrument, and it is the quantity that a contract assembly house can place without buying a full production reel. It also sets the minimum buy on a shortage: when the TSSOP is out and the LFCSP is in stock, the difference in assembled cost can be smaller than the cost of waiting.

Mixing package options on one board is not free: two footprints, two stencil apertures, two inspection routines. Where a product family has one high volume member and one low volume member, putting the LFCSP on the high volume board and the TSSOP on the low volume one is usually the cheaper split.

Electrical notes that do not change with the package

Charge injection below 1 pC into a 1 nF hold capacitor is a 1 mV step, and 2.6 pF of on capacitance is the load the driving amplifier sees. The 120 ohm on resistance is the same die as the TSSOP, so a channel that had to be checked for settling on one package does not need to be re-measured on the other, but the thermal resistance does change and a fault condition that heats the die will reach a higher junction temperature in the smaller body.

Where it fits

Portable test instruments, video routing and any board where four wide range switches have to fit beside a converter. The 33 V range with 3 V logic is what makes it usable in a mixed rail system without a level shifter.

When an order code in this family cannot be found, component lead time solutions lists what else does the same job, BOM shortage recovery covers what to check before a part is dropped into an existing board, and one stop BOM sourcing is the route we take on a live shortage.

Two questions buyers ask

Is the LFCSP order code electrically identical to the TSSOP? The switch is the same. The differences are the footprint, the thermal resistance and the reel quantity. A substitution needs a board change and a re-qualification of the solder joint, not a change to the analog budget.

Does the exposed pad have to be connected? It has to be soldered. Leaving it floating removes the thermal path and, on a leadless package, leaves the part mechanically supported by the terminals alone. Connect it to the net the vendor data sheet specifies and treat the connection as an electrical requirement, not a mechanical one.