Contact Us

HX339070

Brand: Hisiwell
Hisiwell HX339070 is a amplifiers & comparators component designed for Signal Conditioning & Filtering and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HX339070 — Amplifiers & Comparators | Superb Automation

HX339070

Hisiwell — Amplifiers & Comparators

Product Overview

The HX339070 from Hisiwell is a precision amplifier / comparator delivering high gain, wide bandwidth, and low distortion for signal conditioning. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High gain-bandwidth product for wideband signal amplification
  • Low input offset voltage and drift for precision DC applications
  • EMI-hardened design for robust operation in noisy environments
  • Rail-to-rail input/output for maximum dynamic range
  • Low quiescent current for power-sensitive designs
  • Unity-gain stable with capacitive load drive capability

Key Specifications

Channels—
GBWPMHz
Slew RateV/µs
VosµV
Iq per ChannelµA
Input Type—
Supply VoltageV
Operating Temp°C
Package—

Applications

Signal Conditioning & Filtering Current Sensing & Monitoring Data Acquisition Systems Audio & Video Processing Sensor Interface Amplifiers Industrial Control Loops

HX339070: 26 to 38 GHz, 26 dBm, and 2.3 W that has to leave through the die attach

The HX339070 is a Ka band driver amplifier supplied as bare die: 26 to 38 GHz, 16 dB of small signal gain with plus or minus 1 dB of flatness, 26 dBm at the 1 dB compression point, a 6 V rail at 450 mA, and input and output VSWR of 1.7 and 1.4. It is the high current member of a pair of parts with identical published performance. The number that governs how it is used is not the gain. It is the 2.30 W of heat that stays in a die a few millimetres across.

Published values

ParameterValue
Frequency range26 to 38 GHz
Small signal gain16 dB, flatness plus or minus 1 dB
Output P-1dB26 dBm
Noise figurenot stated by the vendor
Input and output VSWR1.7:1 and 1.4:1
Supply6 V at 450 mA
FormBare die

Where the DC input goes

6 V at 450 mA is 2.70 W in. At 26 dBm, or 0.398 W, the RF output takes 14.7 percent of that and 2.30 W becomes heat inside the die. There is no package to spread it. Every degree of junction temperature rise costs compression point and gain, and the vendor gives no thermal resistance figure, so the only safe way to use this part is to measure the die temperature on the first article and to size the spreader from that reading rather than from a datasheet number that does not exist.

The same row under a second part number

The vendor table carries a second row, HX339250, with the same 26 to 38 GHz band, the same 16 dB of gain, the same VSWR, the same 26 dBm and the same 6 V rail. The only difference is 300 mA instead of 450 mA. At 6 V that is 1.80 W in, 22.1 percent efficiency at compression and 1.40 W of heat, 0.90 W less than the 070. A buyer comparing the two rows sees identical performance and no reason to pay for the extra current, which is exactly why the question has to go back to the vendor: the extra bias in the 070 is either bought linearity that the table does not quantify, or a wider screening window on the same die.

Getting 10 dBm into it

16 dB of gain against 26 dBm of output means 10 dBm at the input before compression, and the output moves 2 dB across the band because of the flatness figure. The stage in front therefore has to deliver about 10 dBm with 2 dB of margin and stay linear doing it, which rules out a low current gain block at this frequency. Plan the driver and this part together, not separately.

Two questions buyers ask

Can it run from a 5 V rail instead of 6 V? The table states 6 V and one compression point. Below that the output falls by an amount the vendor has not published. Ask for a swept measurement at your rail before the supply is fixed in the module.

Does the die need a negative gate supply? The row does not list one, unlike the wideband parts in the same catalogue that state a negative gate explicitly. Confirm with the vendor that the single positive rail is the intended bias, because a die that expects a gate reference and does not get one fails on first power up.

SUPERB supplies the HX339070 as bare die with wafer lot traceability, and can quote the HX339250 in parallel so the current question can be settled on price and on measured data rather than on the table. The amplifier cross reference hub sets out what has to match before a Ka band device is swapped, and BOM shortage recovery covers allocation when only one of the two rows is available. The full Ka band range sits in the amplifiers and comparators index.

Request Quote — In Stock, 100% New & Original, Full Warranty