Contact Us

UCC5880QDFCRQ1

Brand: Texas Instruments
Texas Instruments UCC5880QDFCRQ1 is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

UCC5880QDFCRQ1 — Power Management & Signal Chain | Superb Automation

UCC5880QDFCRQ1

Texas Instruments — Power Management & Signal Chain

Product Overview

The UCC5880QDFCRQ1 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

UCC5880QDFCRQ1: an isolated 20 A gate driver whose strength is changed by a pin, not by a resistor swap

The UCC5880QDFCRQ1 is an isolated gate driver for high power silicon carbide MOSFETs and IGBTs in electric vehicle traction inverters. Its distinguishing feature is a dual output stage with real time variable drive strength: a 15 A source and sink main output plus a 5 A secondary output, selectable through digital input pins or through an SPI setting, with three resistor configurations available for the gate path. That lets a controller switch between a fast turn on for efficiency and a slower turn on to control diode recovery and overshoot, without a board change and without an external resistor network switched by relays.

The protection set is what an automotive inverter needs. A shunt based overcurrent comparator, a desaturation detector with 110 ns response and thresholds selectable up to 14 V, an over temperature input that accepts a positive or negative coefficient sensor or a diode, undervoltage and overvoltage monitoring on both supplies, and a soft turn off or a two level soft turn off during a fault so the current is not interrupted abruptly into a parasitic inductance. An integrated 10 bit analogue to digital converter monitors two analogue inputs, the driver side supply, the desaturation pin and the driver die temperature.

Key electrical data for the UCC5880QDFCRQ1

DrivePlus or minus 15 A main output and plus or minus 5 A secondary output, 4 A integrated Miller clamp
SuppliesPrimary side 3 V to 5.5 V, secondary side 15 V to 30 V, total secondary rail to VEE2 not above 30 V
ProtectionDesaturation response in 110 ns, shunt overcurrent, two level soft turn off, active short circuit support
Monitoring10 bit converter on two analogue inputs, VCC2, the desaturation pin and the driver die temperature
InterfaceSPI configuration with digital input pins for drive strength adjustment without the bus
GradeAEC-Q100 qualified, HBM level 2 and CDM level C2b, functional safety support up to ASIL D

Package, marking and reel data

BodyDFC, SSOP 32 pin, 10.30 mm body, wide body with the isolation barrier inside
Reel2000 pieces on a large tape and reel, both the plain and the .A row
FinishNIPDAU at moisture level 3, 260 C peak, 168 hour floor life on the .A row
GradeAutomotive qualified, primary side 3 V to 5.5 V logic

Variable drive strength is a system level answer, not a datasheet trick

Silicon carbide switches fast, and that speed is the reason a traction inverter reaches high efficiency. The same speed produces ringing across the loop inductance and turns on the opposite diode in a half bridge, so the gate resistance that gives the best efficiency at light load is not the one that survives a short circuit at full current. A driver that can change its output strength in real time lets the controller choose per operating point, and the choice can be made from the gate driver's own fault logic without waiting for the main controller to react.

The two level soft turn off is the other half of the same argument. During a desaturation event the current in the switch is several times the nominal, and turning the gate off in one step produces a voltage spike that can destroy the device. Ramping the gate down in two stages limits the spike while still clearing the fault inside the short circuit withstand time. Both behaviours are configured over SPI, which means the thresholds and the blanking times can be set per device rather than per gate resistor. Our component shortage forecast page covers how we plan the automotive isolators and drivers that go with this part.

Buyer questions on the UCC5880QDFCRQ1

Does the driver need an external isolated bias supply? It does. The secondary side runs from 15 V to 30 V and the isolation covers the signal path, so the bias comes from a separate isolated module.

Can the drive strength be changed without SPI? Yes. Digital input pins select between the resistor settings, so a controller can change strength with two logic lines and no bus transaction.

What sensor does the over temperature input accept? A positive or negative coefficient thermistor or a diode, since the input is configured for the sensor type over the same interface that sets the protection thresholds.

Availability and cross reference

Both rows print active at 2000 pieces on a reel, with the .A row carrying the plating and moisture detail. The part sits in a family of automotive isolated drivers where the bias module, the isolator and the driver are often ordered together, and a shortage in one of them stops an inverter build. We hold the set against a program forecast rather than against a purchase order, and the exposure plan is on our safety stock planning page.