Contact Us

TPS543B20RVFR

Brand: Texas Instruments
Texas Instruments TPS543B20RVFR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS543B20RVFR — Power Management & Signal Chain | Superb Automation

TPS543B20RVFR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS543B20RVFR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS543B20RVFR 25 A stackable converter with the power stage inside the package

The TPS543B20RVFR is a 25 A synchronous step down converter for a 4 V to 19 V input and a 0.6 V to 5.5 V output, built around a stacked NexFET power stage with 4.1 milliohm on the high side and 1.9 milliohm on the low side. The whole converter, switches, driver, loop and telemetry, sits in a 40 pin LQFN-CLIP body that the vendor calls a clip package because the die is connected with a copper clip rather than bond wires. That is what makes 25 A in a single phase practical: the resistance is low enough that the conduction loss at full load stays around 1.1 W in the low side switch.

Two of these can be stacked for 50 A with current share, voltage share and a shared clock, so a core rail can grow without changing the controller or the compensation. The loop is internally compensated with an emulated peak current mode control and an adaptive ramp, which is the reason no external compensation network is needed across the frequency range. The switching frequency is set by a resistor on RT from 300 kHz to 2 MHz standalone and from 300 kHz to 1 MHz when stacked.

The output voltage is set either by the internal reference, strapped in 50 mV steps from 0.6 V upward with one resistor on VSEL, or by an external divider into the remote sense amplifier. Using the internal reference removes the divider error from the loop, which is what makes the 1.1 per cent reference tolerance translate into a rail that holds its value over temperature.

Key parameters from the SLUSCR1B document

Input range4 V to 19 V on the power stage, with VDD UVLO rising at 3.8 V and VIN UVLO rising at 3.2 V
Output range0.6 V to 5.5 V, set by a strap resistor on VSEL in 50 mV steps starting at 0.6 V with the pin at 0 k
Output current25 A per phase, 50 A for two phases with current share accuracy of 15 per cent of the per phase current at 20 A
Power stage4.1 milliohm high side and 1.9 milliohm low side in a stacked NexFET with lossless low side current sensing
Switching frequency300 kHz to 2 MHz standalone and 300 kHz to 1 MHz when stacked, set by RT with 66.5 k giving 300 kHz
Soft start0.5 ms with the soft start resistor at 0 k, scaled up from there by the resistor value
Power goodAsserted at 95 per cent of the reference on the way up and released at 105 per cent, with an overvoltage warning window of 108 to 116 per cent
Orderable bodyLQFN-CLIP, 40 pins, 2500 pieces on a large reel and 250 on a small reel, RoHS exempt, minus 40 to 125 degrees

What stacking does to the loop

Stacking is not two converters in parallel with a shared setpoint. The master sends its clock and a share bus, and each phase trims its own output to carry its part of the total. Because the share bus compares currents rather than voltages, a phase that runs hot and climbs in resistance takes less current instead of more, which is the behaviour that keeps a two phase rail alive when one side of the board is in still air.

The frequency range narrows to 1 MHz when stacked because the share loop needs time to settle between switching events. A board that was characterized at 1.2 MHz standalone and then doubled in current has to drop to 1 MHz and recheck the inductor, which is the single most common surprise when a platform is scaled up late.

Where the clip package pays for itself

Enterprise servers, switches, routers, storage arrays and ASIC or FPGA core rails are the natural applications. A 25 A phase at 500 kHz with 1.9 milliohm on the low side dissipates about 66 milliwatts per square of duty in conduction, and the clip connection removes the bond wire resistance that would otherwise add tens of milliohms in series with a 1.9 milliohm die.

The package also has a single thermal pad, which the vendor notes explicitly, so the heat path is one large area rather than several small ones and the board can be laid out with a continuous copper pour under the part instead of isolated islands.

Where this part fits

Any rail between 0.6 V and 5.5 V that has to deliver more than 15 A from a 12 V bus is a candidate, from a switch line card to a storage controller to a compact industrial server. The stackable option means the same part serves a 25 A rail and a 50 A rail, which reduces the number of part numbers on a platform.

For a supply chain team the relevant question is usually whether the reel is the R or the T row, and whether the RoHS exempt status is acceptable in the destination market. The general approach to that is in one stop BOM sourcing and material requirements planning.

What to check before a purchase order

The first field is the reel suffix, 2500 on the R row and 250 on the T row, because a prototype build and a production build need different ones. The second is the VSEL strap, since a part strapped for 0.8 V installed on a board that expects 0.9 V regulates the wrong rail even though the marking is right. The third is the RoHS exemption flag, which has to be declared on the customs paperwork in some markets.

Our desk checks those three against the customer bill of materials and shows the stacked pair as a single line when the rail grows, rather than quoting two unrelated converters. See component lead time solutions for the comparison format.