Contact Us

TMP421AIDCNR

Brand: Texas Instruments
Texas Instruments TMP421AIDCNR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TMP421AIDCNR — Power Management & Signal Chain | Superb Automation

TMP421AIDCNR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TMP421AIDCNR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TMP421AIDCNR remote and local temperature sensor with an SMBus interface in SOT23-8

The TMP421AIDCNR is a temperature monitor that measures its own die and one remote diode connected transistor at the same time. The remote sensor is the point of the part: the transistor is the one already inside a processor, an FPGA, a microcontroller or a discrete diode, so the temperature that matters is measured at the junction that produces the heat rather than at a sensor placed somewhere on the board. Remote accuracy is printed at plus or minus one degree maximum over fifteen to eighty five degrees ambient, with no calibration, and the local channel is printed at plus or minus one and a half degrees in the same window.

The interface is SMBus and I2C compatible, with eight selectable addresses in the 100 11xx range so that several sensors can sit on one bus without a multiplexer. The part carries series resistance cancellation, which removes the error from long traces and from the bulk resistance of the transistor, a programmable non ideality factor so that parts from different makers can be corrected without hardware changes, and diode fault detection that reports an open or shorted remote input instead of returning a plausible but wrong number. Twelve bit resolution is available on both channels, and the conversion rate is programmable from one conversion every sixteen seconds to eight per second.

Key parameters taken from the TMP421AIDCNR document

Local channelplus or minus 1.5 C maximum from fifteen to eighty five C, plus or minus 2.5 C over minus 40 to plus 125 C
Remote channelplus or minus 1 C maximum from fifteen to eighty five C ambient with the remote junction from minus 40 to plus 150 C
Resolution12 bits on both the local and the remote channel
Conversion time100 ms typical, 115 ms typical, 130 ms maximum per channel
Conversion rateprogrammable from 0.0625 to 8 conversions per second
Remote source currentfour settings for high series resistance, medium high, medium low and low, 120, 60, 12 and 6 microamps
Ideality factoroptimised at 1.008, programmable correction through the register set
Interfacetwo wire SMBus, clock to 3.4 MHz, timeout 25 to 35 ms, eight addresses in the 100 11xx range
Supply2.7 to 5.5 V, quiescent 32 microamps typical at 0.0625 conversions per second and 400 microamps at eight per second
Shutdown3 microamps typical, 10 microamps maximum with the bus inactive
Fault handlingdiode fault detection on the remote input, series resistance cancellation
PackageSOT23-8, body DCN, also offered as a wafer level package on the C version
Order code factsTMP421AIDCNR, SOT-23 DCN 8 pins, 3000 pieces on a large reel, NIPDAU, Level-2-260C-1 YEAR, minus 40 to plus 125 C, marking DACI, Active

The table above is read from the vendor document, not from a distributor summary. Where a window is printed, the window is what a production test should use, and the typical value is only a starting point for the first article.

Where the numbers matter in a real build

The remote channel is only as good as the connection to the transistor. Series resistance cancellation removes a fixed offset from trace and bulk resistance, but it cannot remove a mismatch between the two lines of the remote pair, and a difference of a few ohms between the DXP and DXN routes turns into a temperature offset that moves with the current source setting. The document prints the four source current settings and their purpose, and the practical rule is to route the pair as a tight differential with no other signal crossing it, and to keep the filter capacitor close to the device rather than at the transistor.

The conversion rate is a power decision, not a convenience setting. At one conversion every sixteen seconds the part draws about 32 microamps, and at eight conversions per second it draws about 400 microamps, which is more than ten times the current for a temperature that changes slowly. In a battery powered product the useful setting is the slowest one that still catches a thermal event before the processor throttles, and the alert threshold does that job better than a fast polling rate. The shutdown current of 3 microamps makes the part viable in a product that measures temperature once per minute.

The non ideality factor is where most first articles go wrong. Transistors from different makers have different ideality factors, and the error appears as a constant offset that looks like a calibration problem. The register allows the factor to be trimmed, and the document prints the value used for the default. A board that reports a steady three degree offset on one processor model and nothing on another is not a board problem, it is the factor, and the fix is a register write rather than a board change.

The address range allows eight devices on one bus, and the two address pins can be tied to ground, the supply, SDA or SCL, which gives the eight combinations without extra parts. The catch is that SCL and SDA are not free at power up on every host, and an address that depends on a bus line being low during a reset can change if the host drives the bus early. The safer assignment for a product with more than two sensors is the four combinations that use ground and supply only, which are stable at any reset.

  • Remote channel reading against a calibrated probe on the same transistor, at three temperatures, after the ideality factor is set.
  • Noise on the remote pair with the real trace length, measured with the processor running at full load rather than idle.
  • Offset introduced by the four source current settings, which shows whether the trace resistance is being cancelled.
  • Fault reporting: an open remote pin and a shorted remote pin should both flag, not return a number.
  • Supply current at the two conversion rates the product actually uses, against the printed typical values.
  • Behaviour at power up before the host writes the configuration registers, since the default rate may be the fast one.

Which projects this part fits

This sensor appears wherever a processor or an FPGA has to be protected from its own heat: server and storage boards, telecom central office equipment, optical line cards, base station remote radio units, industrial computers, motor drive control cards with a hot processor, and medical instruments where a thermal fault has to be logged rather than guessed. It is also used to measure a power transistor or a diode in a module where the junction is the only place the temperature is meaningful, which is the case in every compact power supply that has no room for a sensor next to the heat source.

Questions that come up before a purchase order is released

Can this part measure a transistor that is not a real diode?

It measures any diode connected transistor whose behaviour follows the printed ideality factor, including the sense transistor built into many processors and FPGAs. Discrete small signal transistors work as well. A power MOSFET body diode is not a suitable sensor, and a thermistor is a different device with a different interface.

What happens if the remote transistor is disconnected?

The part reports a diode fault rather than a temperature, and that is the behaviour a protection routine should test for. A host that only reads the temperature register and ignores the status will see a plausible low value and conclude the board is cold, which is the failure mode that costs a product its thermal protection.

Why do three of the same part on one bus need different orders?

The address pins set the address, and the value is latched from the pin state at the address phase of each transaction. Two devices with the same strap respond at the same address, which produces a bus conflict rather than a clean error. Assign one of the eight printed combinations per device and record it on the assembly drawing, not in a build note.

Is the supply range really 2.7 to 5.5 V?

Yes, and the supply rejection is printed at 0.2 degrees per volt typical and 0.5 maximum, so a 3.3 V rail with a hundred millivolts of ripple contributes a small but measurable error. The part does not need a reference and it does not need a separate analog rail, which is why it fits a digital board without a quiet supply.

Does the reel quantity fit a small build?

The part ships at 3000 pieces on a large reel with a level 2 moisture class and a one year floor life. For a prototype quantity we can supply from a cut reel with the original label, and the date code stays traceable, which matters if the product later needs a temperature accuracy audit.

How SUPERB handles this line

We supply the TMP421AIDCNR on the original 3000 piece reel with date code and lot traceability, and we check the marking DACI on the incoming count because the same body is used by other members of the family with a different marking. For customers who need the sensor plus its filter capacitor and pull up resistors as one kit, we quote them together. The amplifier cross reference and medical device components pages cover the neighbouring parts of a measurement chain, and the incoming inspection plan page describes how we verify a sensor that has to be trusted for a thermal protection threshold.