ISO1412BDWR
Product Specifications
ISO1412BDWR
Texas Instruments — Power Management & Signal Chain
Product Overview
The ISO1412BDWR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
ISO1412BDWR: an isolated RS-485 transceiver with a 5 kVrms barrier
The ISO1412BDWR is a galvanically isolated differential line transceiver for RS-485 and RS-422 buses. The logic side runs from 1.71 V to 5.5 V and the bus side from 3 V to 5.5 V, so a 1.8 V processor can sit on one side of the barrier and a 5 V bus on the other without a level translator. The bus pins are protected to 30 kV human body model, 16 kV IEC 61000-4-2 contact discharge and 4 kV of electrical fast transient, which removes the external clamp network that a non isolated transceiver needs on a field wiring terminal.
The family is offered at 500 kbps, 12 Mbps and 50 Mbps, and this member is the 12 Mbps row. A one eighth unit load receiver allows 256 nodes on one segment. The barrier is certified to 7071 VPK of transient overvoltage and 1500 VPK of working voltage under VDE 60747-17, and to 5000 Vrms for one minute under UL 1577, with the usual telecom, medical and industrial safety standards listed alongside. Common mode transient immunity is about 100 kV per microsecond, and the part powers up and down without glitching the bus, which is what a hot plug card needs.
Key data for the ISO1412BDWR
| Function | Isolated RS-485 and RS-422 transceiver, PROFIBUS compatible at a 5 V bus supply |
| Supplies | 1.71 V to 5.5 V on the logic side, 3 V to 5.5 V on the bus side |
| Rate | 12 Mbps on this member, with 500 kbps and 50 Mbps members in the same family |
| Bus load | One eighth unit load, up to 256 nodes on one bus |
| Immunity | 30 kV HBM, 16 kV IEC contact discharge, 4 kV EFT, about 100 kV per microsecond CMTI |
| Isolation | 5000 Vrms for one minute per UL 1577, 7071 VPK VIOTM and 1500 VPK VIORM per VDE |
Body, marking and reel data
| Body | Wide body SOIC DW, 16 pins, 10.30 mm by 10.30 mm, the body the creepage figures depend on |
| Reel | The B row prints 40 pieces in a tube, while the non B row of the same string prints 2000 pieces on a large reel |
| Marking | ISO1412B on the B rows and ISO1412 on the plain rows |
| Handling | Moisture level 2, 260 C peak, one year floor life |
| Temperature | Minus 40 C to 125 C |
When the barrier belongs inside the transceiver
A solar inverter or a motor drive brings a bus pair in from a cable that runs next to switching nodes. The conventional answer is an isolating digital coupler, an isolated supply and a separate transceiver, which is three parts plus a DC to DC converter on the field side. Integrating the barrier into the transceiver removes that converter, because the bus side draws its power through the isolation path, and it also removes the stub between the coupler and the transceiver that would otherwise radiate.
The second case is a multi point bus where the nodes sit at different ground potentials. The 1/8 unit load allows a long segment with many drops, and the barrier means the ground difference appears across the isolation capacitors rather than across the receiver input.
Ordering points that catch people out
The first is the packing. The B row on this string prints 40 pieces in a tube while the plain row prints 2000 on a large reel. A production order that names only the suffix can land on the tube quantity and stall the line. The reel size should be written on the order and checked on the acknowledgement.
The second is the rate. The three family members differ by a factor of a hundred, and the part number does not spell the rate out clearly. The third is the isolation grade: the family offers reinforced and basic variants, and the certification level has to match the safety case rather than the price.
Isolated transceivers and the packing trap
This string is a good example of why packing has to be named on the order. The B row prints 40 pieces in a tube, and the non B row of the same string prints 2000 pieces on a large reel. The electrical difference between the two is the protection class, not the packing, but a buyer who copies the suffix without a packing note can end up with a tube for a production line.
We quote the body, the reel size and the isolation grade together, and we ask for the safety case when the product needs reinforced isolation rather than basic. The wide body is what carries the creepage that the certificate depends on, so a narrow body substitute is not an option even when the electricals match and the price is lower.
The fourth is the body. The creepage and clearance that the safety certificate depends on belong to the wide body, and a narrow body substitute invalidates the certificate even when the electricals match. Our note on how a certified part is verified on arrival is on our incoming inspection plan page, and the obsolescence angle for interface parts is on our component obsolescence management page.