Contact Us

DRV5055A1QDBZT

Brand: Texas Instruments
Texas Instruments DRV5055A1QDBZT is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

DRV5055A1QDBZT — Power Management & Signal Chain | Superb Automation

DRV5055A1QDBZT

Texas Instruments — Power Management & Signal Chain

Product Overview

The DRV5055A1QDBZT from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

DRV5055A1QDBZT: the 250 piece reel of the 100 mV per mT linear sensor

The DRV5055A1QDBZT is the same A1 ratiometric linear Hall sensor as the reel part, packed 250 pieces on a small reel by the T suffix. It exists for the run that is too large for a bag and too small for a full reel: a pilot build, a service kit, or a line that changes over several times a week and cannot afford to waste 2750 parts.

Electrically the part is unchanged. Sensitivity is 100 mV per mT at 5 V and 60 mV per mT at 3.3 V, the quiescent output sits at half the supply, the linear range is about plus or minus 21 mT at 5 V, and the sensing bandwidth is 20 kHz. The A version carries 0.12 percent per degree of magnet temperature compensation.

What changes is the handling. A 180 mm reel with 250 parts still runs on the same feeder as a full reel, so the placement program does not change, and the line does not have to switch to a tray or a bag feeder for the small lot.

Key data for the DRV5055A1QDBZT

OutputAnalog, ratiometric, quiescent at half the supply
Sensitivity100 mV per mT at 5 V, 60 mV per mT at 3.3 V, both typical
Linear rangePlus or minus 21 mT at 5 V
Compensation0.12 percent per degree of magnet temperature drift, A version only
Bandwidth20 kHz sensing bandwidth
Supply3.3 V or 5 V, 3 mA typical at 5 V
TemperatureMinus 40 C to plus 125 C on the Q grade

Body, packing and marking data

BodySOT-23, three pins, DBZ outline
Packing250 pieces on a small reel on the T suffix, against 3000 on the R suffix
FinishTin lead finish, moisture level 2 with a one year floor life
Marking55A1 on the body, identical to the large reel part

Which letter changes and which does not

The T at the end is the only difference from the large reel part, and it changes the reel size rather than the silicon. The body marking is the same, so a mixed stock of T and R parts cannot be told apart once the reels are removed from their labels. Label control on the rack is the only protection.

The addendum prints this string as an active row, and it prints a separate TO-92 row for the same A1 die under the LPG body, which is where the through-hole option lives. A line that has both bodies in stock should keep them in separate bins, because the electrical behaviour is identical and a mix up will only be found at first article.

The second letter to watch is the A itself. The Z1 part has the same 100 mV per mT and the same 21 mT range, but no temperature compensation, so a substitution between A1 and Z1 will read correctly at room temperature and drift on a hot mechanism.

Where a small reel makes sense

Pilot builds, service and repair kits, and contract lines that run mixed models in short campaigns are the cases where 250 pieces is the right quantity. The alternative, buying a full reel and returning the balance, costs more in handling than the smaller reel costs in unit price.

For a new program that is still choosing between position sensing approaches, the IMU selection guide covers the trade against an inertial part, and the excess inventory management page deals with the opposite problem, a full reel left over after the program ends.

Questions we get on this code

Does the small reel change the moisture level? No, the floor life and the reflow profile are the same as the large reel part. What changes is that a 250 piece reel is often left on the machine longer, so the exposure clock after opening the bag is the number to track rather than the reel size.

Can a T and an R part be mixed on one board? Electrically yes, and no test will show a difference, but traceability requires the lot to be recorded per reel. In a regulated build the mixing is usually prohibited outright, which is why the labels matter more than the parts.

The third question is about the reel size against the feeder. A 180 mm reel fits the same feeder as a 330 mm reel on most placement machines, so the small reel costs nothing in setup. Where it does cost something is in the number of reel changes per shift, and that is the only reason a line with a steady demand would prefer the larger packing.

A final note on the two letters. A1 and Z1 differ only in the temperature trim, and at room temperature they read the same within the sensitivity window. A bench test at 25 C therefore cannot separate them, and a receiving inspection that relies on a functional check will pass a wrong letter without noticing. The reel label and the body marking are the only reliable evidence, which is why the labels should be photographed and kept with the lot record.