Contact Us

BQ24600RVAR

Brand: Texas Instruments
Texas Instruments BQ24600RVAR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

BQ24600RVAR — Power Management & Signal Chain | Superb Automation

BQ24600RVAR

Texas Instruments — Power Management & Signal Chain

Product Overview

The BQ24600RVAR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

BQ24600: a 10 A charger controller for one to six cells, with a low quiescent draw

The BQ24600RVAR is a stand alone synchronous buck charge controller. The FETs are external N-channel devices, which is what allows it to deliver up to 10 A of charge current and up to 10 A of adapter current at the same time. The input range is 5 V to 28 V, the cell count is one to six in series, and the switching frequency is fixed at 1.2 MHz.

This is the part for a pack that is too big for an integrated charger. A power tool pack, a portable medical instrument with a 4 cell pack, an industrial handheld, all of them need charge current in the amps and a thermal path that a 3 mm die cannot provide. Putting the switches outside moves the heat into parts that have a real thermal pad and a real copper area.

The low quiescent current is the second reason to use it. With the adapter removed and the enable low, the off state input current is under 1.5 mA, which matters on a product that sits on a shelf for months and is expected to still have a charged pack when it is picked up.

Key data for the BQ24600RVAR

FunctionStand alone synchronous buck charge controller, external N-channel FETs
Input range5 V to 28 V VCC
Cell countOne to six cells in series
Charge currentUp to 10 A, adapter current limit also up to 10 A
Switching frequency1.2 MHz fixed
Voltage accuracyPlus or minus 0.5 per cent charge voltage
Current accuracyPlus or minus 3 per cent charge current
PhasesPreconditioning, constant current, constant voltage, with termination
SafetyInput OVP, thermistor based hot and cold suspend, internal charge timer
QuiescentUnder 1.5 mA off state input current
PackageVQFN, 16 pins, RVA body
TemperatureMinus 40 to 85 C operating

Body and ordering data

BQ24600RVAR is the active production row: VQFN RVA with 16 pins, 3000 pieces on a large tape and reel, NIPDAU finish, moisture level 1 at 260 C with no floor life limit, minus 40 to 85 C, marking OAQ. The same string is also offered at 250 pieces on a small reel for a line that does not want a full reel on the feeder.

Sixteen pins and a 10 A converter is a tight combination, and the pinout puts the gate drive, the sense lines and the feedback in a small area. The kelvin connection to the sense resistor is not optional at this current. A trace shared with the power path drops a voltage that the current loop reads as charge current, and the error shows up as a pack that terminates early.

The 85 C ceiling is the real limit

Ten amps into a 4 cell pack is roughly 67 W at the top of the charge, and the converter is not lossless. Even at 95 per cent efficiency the stage dissipates more than 3 W, and that heat has to leave through the external FETs rather than the controller. The controller's own 85 C rating is easy to respect. The FETs and the inductor are where the thermal work happens.

The internal charge timer is a backup rather than a feature. It terminates a charge that has run too long, which on a large pack with a failing cell is the difference between a slow charge and a thermal event. The value is set by a capacitor, and the capacitor is often the part that is wrong on a first build.

Where it fits in a build

Power tools, portable medical equipment, industrial handhelds, mobile internet devices and battery bay chargers. The medical case is common because the pack is often 3 or 4 cells and the charge current is set by a therapy cycle. The medical device components page covers the incoming inspection and date code questions those builds raise.

A single cell product with 2 A of charge current does not need this part. The external FETs, the inductor and the sense resistor cost more board area than an integrated charger, and the efficiency advantage only appears above about 2 A.

The sourcing side of this part is covered on the component lead time solutions. For a 10 A controller that is quoted with a long lead time, that page sets out the stock and packaging checks we run before offering an alternative.

Questions we get on this code

Can it charge six cells from a 24 V adapter? Yes, within the duty cycle. The converter is a buck, so the input must stay above the pack voltage plus the headroom the loop needs, and a 24 V adapter on a 25.2 V pack is outside that.

Does it need a host? No. There is no bus on this part. Current, voltage, the adapter limit and the timer are set with resistors and a capacitor.

What happens with the battery removed? The part regulates the system node at the charge voltage setting. Without a pack to absorb the current, the loop has no load and the output rises until the sense resistor or the OVP acts, so a battery-less operation needs the adapter current limit set low.

Why does the current read low on the bench? Almost always the sense resistor connection. The differential pair has to be taken from the pads of the resistor itself, not from the power trace next to it.