DDR3L and DDR4 SDRAM Chips for Embedded and Industrial Designs
Product Specifications
Product Overview
Memory is usually the last part of a board to be redesigned, because changing the SDRAM means changing the layout, the termination and the boot loader timings. That is why DDR3L is still required for industrial controllers, medical instruments and telecom line cards long after the consumer market has moved on, and why the same boards are often specified with a DDR4 option for the next revision. Both paths are covered on this page.
The models below are the Micron DDR3L (1.35 V) and DDR4 (1.2 V) parts most often requested for embedded designs. DDR3L runs at 1.283 V to 1.45 V and is backward compatible with 1.5 V DDR3 boards, so a single part number can serve both an existing 1.5 V design and a new low power one. DDR4 brings 8Gb and 16Gb density with 3200 MT/s speed grades and the same 96-ball footprint family, which keeps the escape routing familiar while doubling the density per device.
All models are grouped into this single product, so you can send the model list and quantities you need in one enquiry and receive one quote covering mixed densities, speed grades and temperature ranges.
Electrical Specifications
| Parameter | DDR3L SDRAM | DDR4 SDRAM |
|---|---|---|
| Supply voltage | 1.35 V nominal (1.283 V to 1.45 V), backward compatible with 1.5 V DDR3 | 1.2 V nominal |
| Densities offered | 1Gb, 2Gb, 4Gb | 8Gb, 16Gb |
| Organisations | x16 and x8, 8 banks | x16 and x8, 16 banks (bank groups) |
| Speed grades | DDR3-1600 (tCK 1.25 ns, CL 11), DDR3-1866 (tCK 1.07 ns, CL 13), DDR3-2133 (tCK 0.938 ns, CL 14) | DDR4-3200 (tCK 0.625 ns) |
| Refresh | 8K refresh, auto refresh and self refresh | Auto refresh and self refresh |
| Packages | 96-ball FBGA for x16, 78-ball FBGA for x8 | 96-ball FBGA for x16, 78-ball FBGA for x8 |
| Temperature options | Commercial, industrial (IT) and automotive (AAT) | Commercial, industrial (IT) |
| Interface | SSTL_135, on-die termination, ZQ calibration | POD12, on-die termination, ZQ calibration, data bus inversion |
Included Models and Order Codes
The table lists the densities, organisations and speed grades held or sourced most often. Send the full part number including the temperature code and speed grade and we will confirm availability against that exact string.
| Model | Density / Organisation | Voltage | Speed Grade / Timing | Package | Temperature |
|---|---|---|---|---|---|
| MT41K64M16TW-107:J | 1Gb, 64 Meg x 16 | DDR3L 1.35 V | -107 = DDR3-1866, tCK 1.07 ns, CL 13 | 96-ball FBGA | Commercial |
| MT41K128M16JT-125:K | 2Gb, 128 Meg x 16 | DDR3L 1.35 V | -125 = DDR3-1600, tCK 1.25 ns, CL 11 | 96-ball FBGA | Commercial |
| MT41K128M16JT-125 IT:K | 2Gb, 128 Meg x 16 | DDR3L 1.35 V | -125 = DDR3-1600, tCK 1.25 ns, CL 11 | 96-ball FBGA | Industrial |
| MT41K128M16JT-125 AAT:K | 2Gb, 128 Meg x 16 | DDR3L 1.35 V | -125 = DDR3-1600, tCK 1.25 ns, CL 11 | 96-ball FBGA | Automotive |
| MT41K256M16TW-107:P | 4Gb, 32 Meg x 16 x 8 banks | DDR3L 1.35 V | -107 = DDR3-1866, tCK 1.07 ns, CL 13 | 96-ball FBGA, 8 mm x 14 mm | Commercial |
| MT41K256M16TW-107 IT:P | 4Gb, 32 Meg x 16 x 8 banks | DDR3L 1.35 V | -107 = DDR3-1866, tCK 1.07 ns, CL 13 | 96-ball FBGA, 8 mm x 14 mm | Industrial |
| MT41K256M16TW-107 AAT:P | 4Gb, 32 Meg x 16 x 8 banks | DDR3L 1.35 V | -107 = DDR3-1866, tCK 1.07 ns, CL 13 | 96-ball FBGA, 8 mm x 14 mm | Automotive |
| MT41K256M16TW-107 XIT:P | 4Gb, 32 Meg x 16 x 8 banks | DDR3L 1.35 V | -107 = DDR3-1866, tCK 1.07 ns, CL 13 | 96-ball FBGA, 8 mm x 14 mm | Industrial, premium lifecycle (PLP) |
| MT41K256M16HA-125:E | 4Gb, 256 Meg x 16 | DDR3L 1.35 V | -125 = DDR3-1600, tCK 1.25 ns, CL 11 | 96-ball FBGA | Commercial |
| MT40A512M16TB-062E:R | 8Gb, 512 Meg x 16 | DDR4 1.2 V | -062 = DDR4-3200, tCK 0.625 ns | 96-ball FBGA, 8 mm x 14 mm | Commercial |
| MT40A512M16LY-062E IT:E | 8Gb, 512 Meg x 16 | DDR4 1.2 V | -062 = DDR4-3200, tCK 0.625 ns | 96-ball FBGA, 7.5 mm x 13.5 mm | Industrial |
| MT40A1G16TB-062E:F | 16Gb, 1 Gig x 16 | DDR4 1.2 V | -062 = DDR4-3200, tCK 0.625 ns | 96-ball FBGA | Commercial |
| MT40A512M16TD-062E:R | 8Gb, 512 Meg x 16 | DDR4 1.2 V | -062 = DDR4-3200, tCK 0.625 ns | 96-ball FBGA | Automotive option available |
Key Features
Wide Density Range In One Enquiry – 1Gb to 16Gb densities so a single purchase order can cover a small controller board and a dense telecom line card without a second sourcing round.
Speed Grades Matched To The Controller – DDR3-1600, DDR3-1866, DDR3-2133 and DDR4-3200 bins, with the timing code (-125, -107, -093, -062) read straight from the order string rather than guessed.
Industrial And Automotive Temperature – IT and AAT marked parts for equipment that has to run at -40 C or in an engine bay, not only the commercial grade stocked for consumer boards.
Backward Compatible DDR3L – 1.35 V DDR3L parts operate in 1.5 V DDR3 designs, so an existing board can be kept in build with one part number instead of a memory subsystem redesign.
Consistent FBGA Footprints – 96-ball x16 and 78-ball x8 footprints are shared inside each family, so a density change can often be made without touching the escape routing.
Premium Lifecycle Options – The X prefix on Micron DDR3L marks a premium lifecycle product, which is the right choice when a platform has to stay in service for a decade or more.
Verified Supply Chain Handling – Memory is one of the most counterfeited component groups, so parts are sourced through established supply channels and marked clearly on the quote when they are not sealed original sealed stock.
Applications
Designs where these parts are typically specified: Together with the SUPERB PCB and SUPERB PCBA work we support, a memory heavy board can be quoted as one line item, from the SDRAM through the passives to the finished assembly.
Industrial Controllers And PLCs – Long life boards that were laid out for DDR3L and stay in build for many years, where a form, fit and function memory source matters more than a new layout.
Telecom And Networking Line Cards – Packet processing and control planes that need 2Gb to 8Gb of fast buffer memory next to an FPGA or a network processor.
Medical Imaging And Instrumentation – Frame buffers and scan data capture where the industrial temperature grade and a stable, traceable supply are part of the approval file.
Automotive And Telematics Modules – AAT marked parts for navigation, gateway and camera modules that have to keep the same memory BOM through a long vehicle programme.
Sourcing and Cross-Reference
Memory supply turns over faster than any other component family, and a line can stop for a single density or speed grade. We check the requested part number against available stock and against pin-compatible alternatives in the same family, and we state clearly which of the two a quote refers to.
Cross reference for SDRAM has hard limits, and we will tell you when a substitute is not a drop-in: density, organisation, speed grade, voltage and temperature range all have to match, and the CAS latency programmed in the memory controller has to be re-checked when the speed grade changes. Where a drop-in replacement exists inside the same family (for example a different -107 revision or an IT grade instead of a commercial grade), we supply the cross reference table with the quote.
Where the board is built in volume, SUPERB Assembly support covers the SMT build behind these parts.
Q: Can you supply pin-to-pin replacement equivalents for discontinued SDRAM part numbers?
A: Yes. Send the model list, the quantity and the target price and the SUPERB Tech sales team will confirm availability, batch information and the nearest equivalent inside the same family.
Why Source SDRAM Chips from Superb Automation?
- Specialised Sourcing Focus: Memory, RF and mixed-signal parts for industrial, telecom, medical and defence builds, quoted by engineers rather than by a catalogue script.
- Hard-To-Find And Obsolete Parts: Long lead times, last time buy positions and end of life notices are the normal case here, not the exception, and we say up front which of the three applies.
- Cross Reference Support: Family, revision and grade alternatives listed with the differences spelled out, so you can decide whether the substitute is acceptable for your board.
- Stock And Build Quantities: Samples, repair quantities and volume orders are all welcome, and the quote states the batch information for each line.
- BOM Kitting: Passives, memory and interface parts for the same board can be quoted together, which removes a layer of incoming inspection for your production team.
- Reply With Evidence: Documents, batch marking and condition (new and sealed, or pulled and tested) are stated on the quote before the order is placed.
Related Product Families
This page is part of the component range we supply for industrial, telecom, medical and defence builds. Continue with: Components, Multi-Function ICs, MCU and Embedded Processors, Component Sourcing and Supply.