Contact Us

INA321EA/2K5

Brand: Texas Instruments
Texas Instruments INA321EA/2K5 is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

INA321EA/2K5 — Power Management & Signal Chain | Superb Automation

INA321EA/2K5

Texas Instruments — Power Management & Signal Chain

Product Overview

The INA321EA/2K5 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

INA321EA/2K5: a 40 uA instrumentation amplifier for bridge and biosignal front ends

The INA321EA/2K5 is a micropower CMOS instrumentation amplifier in an 8 pin MSOP, supplied on a 2500 piece reel. It draws 40 uA per channel and under 1 uA in shutdown, which is what puts it in battery instruments and in multiplexed front ends where the amplifier is powered only while its channel is being read. The internal gain is 5 V/V and an external resistor pair raises it from there, so a bridge with a 2 mV full scale signal can reach a converter input without a second stage.

The input stage is CMOS with a 10 pA bias current, which is the figure that lets the part sit on a high impedance sensor without a buffer. Offset is 200 uV, common mode rejection is 94 dB, and the rejection stays high to about 3 kHz, which is the range where line pickup and its harmonics sit in a mains powered instrument. The output swings to within 20 mV of the positive rail, so a 3 V converter can be driven from a 3.3 V supply without losing codes at the top of the range.

Key data for the INA321EA/2K5

Gain5 V/V internal, set to 5 plus 5 times R2 over R1 by two external resistors, so a gain of 100 needs a ratio of 19
Supply current40 uA per channel operating and under 1 uA in shutdown, with a return to normal operation in microseconds
Input10 pA bias current, 200 uV offset, 94 dB common mode rejection held to about 3 kHz
AccuracyGain accuracy 0.02 per cent at G equal to 5 with 2 ppm per degree drift
Bandwidth500 kHz at a gain of 5, with a rail to rail output that reaches within 20 mV of the positive rail
Supply and temperatureSingle supply operation, specified from minus 55 C to 125 C, which is wider than the industrial parts around it

Body, marking and reel data

BodyMSOP-8 on the single channel member; the dual member of the family ships in the wider TSSOP-14
Reel2K5 is 2500 pieces, which is the reel size that appears on the catalogue entry rather than the 2500 or 3000 split seen on newer parts
Shutdown pinA dedicated shutdown input that drops the part below 1 uA and returns it in microseconds, so a multiplexed front end can share one amplifier across channels
Document ageSBOS168D is dated December 2000 and revised January 2006, so the electrical rows are the vendor's current statement but the packaging data is old
TemperatureMinus 55 C to 125 C, a wider window than the 40 to 125 C of the newer instrumentation amplifiers in the same catalogue

Where a micropower instrumentation amplifier still wins

A 40 uA quiescent current is roughly a hundred times lower than a precision instrumentation amplifier such as the INA819, and the trade is bandwidth and noise. For a weigh scale that reads ten times a second, 500 kHz of bandwidth is far more than the application needs, and the 10 pA bias current is better than the newer parts deliver. The part wins where the sensor is high impedance, the reading is slow and the battery has to last for years.

The external gain resistors are the detail that decides whether the 0.02 per cent gain accuracy is reached. The internal network is trimmed to 5 V/V, and the external pair adds to it, so the ratio of the two resistors and their matching set the final gain error. A 0.1 per cent pair gives a gain error that is dominated by the resistors rather than by the amplifier, which is why a matched network is the normal choice above a gain of 20. The shutdown pin turns the part off between readings, and the return time is short enough that a 1 kHz multiplexed scan does not lose settling. Our amplifier cross reference groups the instrumentation amplifiers by supply current and input bias, and the medical device components note covers the same front end in patient connected equipment, where bias current and isolation are the first two questions.

Buyer questions on the INA321EA/2K5

Can it run from a single 3 V cell? Yes, the family is specified for single supply operation and the output reaches within 20 mV of the positive rail, so a 3 V rail with a 2.5 V reference keeps the signal inside the converter range.

What happens to the gain if the external resistors are omitted? The part runs at its internal gain of 5. The gain pin is brought out so the internal node can be divided, and leaving it open is a valid configuration rather than a fault.

Is the 200 uV offset a maximum or a typical? It is quoted as a typical for the family in the summary, so a worst case budget should add the drift over the temperature range and treat the offset as a distribution rather than a limit.

Availability and ordering notes

INA321EA/2K5 is the single channel MSOP-8 on a 2500 piece reel. The document behind it predates the current packaging conventions, so a quotation that shows a different reel size or a different moisture level should be checked against the vendor rather than assumed from the catalogue. The part remains the standard choice in weigh scales and portable instruments, and a customer who is second sourcing it usually needs the gain resistor network as well as the amplifier.