AI Hardware PCBA Assembly Solution
Product Specifications
PCBA assembly for AI hardware — 0.35 mm BGA, 01005 passives, via-in-pad, 3D X-ray, thermal interface assembly and functional test on boards built for edge inference and server accelerator cards.

Product Overview
Assembling an AI board is a different problem from assembling a control board. The packages are large, the balls are fine, the boards are thick, and the thermal path is part of the electrical specification. A 0.35 mm pitch BGA on a 3 mm 20-layer board does not self-align during reflow the way a 0.8 mm package does, and a void under a thermal pad shows up as a hot spot months later rather than at first test.
We assemble AI hardware as a single flow: solder paste printing with SPI, fine-pitch placement, reflow with a profile built for the thermal mass of the board, AOI, 3D X-ray on the BGA field, press-fit and through-hole where the design calls for it, conformal coating, and functional test at temperature. Fabrication and assembly sit in the same plant, so the board does not travel between suppliers before it is populated.
The work is quoted from released files: Gerber, BOM with manufacturer part numbers, centroid data, assembly drawing and test specification.
Key Specifications
| Parameter | Capability |
|---|---|
| Minimum component | 01005 (0402 metric) |
| BGA pitch | 0.35 mm and above |
| Package types | BGA, LGA, QFN, DFN, CSP, PoP, press-fit connectors |
| Board thickness | 0.6–4.0 mm, with support tooling above 2.5 mm |
| Board size | Up to 620 × 580 mm |
| Placement accuracy | ±25 µm at 3 sigma |
| Inspection | SPI, AOI, 2D/3D X-ray, cross-section |
| Soldering | Lead-free SAC305, nitrogen reflow, 10-zone |
| Coating | Selective conformal coat, acrylic or urethane |
| Test | ICT, flying probe, functional test, burn-in at temperature |
| Traceability | Per-board serial with reflow, AOI and X-ray records |
| Standards | IPC-A-610 Class 2 / Class 3 |
| Volume | Prototype from 5 pcs, production to 50k per year |
Where AI Assemblies Fail
Warpage under reflow. A 3 mm 20-layer board bows when it is heated, and a bowed board lifts the corner balls of a large package. Support tooling, a reflow profile with a controlled soak, and a board that met the 0.5% warp spec at fabrication are what keep the corner joints attached.
Voids under thermal pads. Thermal interface voids are invisible to AOI and to electrical test. They are found by 3D X-ray and by thermal cycling, which is why both are in the flow for any board with an exposed thermal pad.
Fine-pitch bridging under a large package. At 0.35 mm pitch the paste volume window is narrow: too little and the joint opens, too much and it bridges under the package where rework is destructive. SPI closes the loop before placement rather than after reflow.
Mixed technology on one board. Press-fit connectors, through-hole power terminals and fine-pitch SMT on the same panel means two soldering processes and a selectivity plan for masking, coating and reflow order.
Process Flow
Solder paste printing with SPI, fine-pitch placement, reflow, AOI, 3D X-ray of the BGA field, through-hole and press-fit assembly, wave or selective solder, cleaning, conformal coating, then functional test and burn-in. Rework, where required, goes through a dedicated station with preheat and a recorded profile.
Applications
AI accelerator cards, edge AI gateways and boxes, inference modules and carrier boards, vision cameras with on-board inference, robotics controllers, and server line cards with high-speed connectors.
Why Superb Automation
Fabrication and assembly in one plant. No handling risk and no finger-pointing between board shop and assembler when a 20-layer HDI does not sit flat.
3D X-ray as standard on BGA fields. Voids, head-in-pillow and open joints are found before the unit ships, not after the customer's thermal test.
Component sourcing alongside assembly. Twenty-five years of sourcing, with long-lead and end-of-life planning built into the quote rather than discovered at kitting.
Prototype to production on the same line. Five pieces for validation, then the same process at volume, so the qualification actually transfers.
Traceability per board. Serial numbers map to paste lot, reflow profile, AOI result and X-ray image.
Assembly only. We build to your released files. We do not design the board or the circuit.