工作频率: 500 MHz to 6 GHz

P1dB - 压缩点: 21.3 dBm

增益:16.3 dB

工作电源电压:5 V

NF—噪声系数: 1.4 dB

OIP3 - 三阶截点:43.6 dBm

工作电源电流:122 mA

工作温度:- 40 C~+ 105 C
 

TQL9062 is a small 2 x 2 mm surface-mount packaged cascaded high-linear gain block amplifier. At 3.5 GHz, the amplifier typically provides 16.3 dB gain, offers +43.6 dBm OIP3 under a 120 mA bias setting, and has a 1.4 dB noise figure. The LNA can be biased by a single positive power supply ranging from 3.3 to 5 volts. 

TQL9062 has excellent noise figure and high linearity performance, enabling the device to be used in the receiver and transmitter chains of high-performance systems. The gain block uses the high-performance E-pHEMT process for internal matching, and only four external components are required to operate with a single positive power supply: the external RF choke coil and blocking/bypass capacitors. This low-noise amplifier contains an internal active bias circuit to maintain high performance over temperature and integrates a shutdown capability to allow operation in TDD applications. 

TQL9062 covers the frequency band of 500 - 6000 MHz and is suitable for wireless infrastructure or other applications that require high linearity and/or low noise figure. 

Application program

Repeater/DAS 

• Mobile infrastructure 

•LTE/WCDMA/cma/GSM

General Wireless 

• TDD or FDD system 

Product features

0.5 - 6.0 GHz operating bandwidth 

• At 3.5 GHz, the gain is 16.3 dB. 

• At 3.5 GHz, 43.6 dBm OIP3 

1.8V TTL logic compatibility for shutdown control 

• Unconditional stability 

Integrated on-chip matching, 50 ohm input/output 

Integrated active bias