QPL9098TR7 RF Amplifier 4.4 - 6 GHz

QORVO

Operating frequency: 4 GHz to 6 GHz 

P1dB - Compression point: 16 dBm 

Gain: 19.6 dB 

Working power supply voltage: 4.2 V 

NF - Noise Factor: 1.3 dB 

OIP3 - Third-order Cutoff Point: 36 dBm 

Working power supply current: 65 mA 

QPL9098 is a high-linear, ultra-low-noise gain block amplifier. The product incorporates the bypass mode function. At 5.5GHz, the QPL9098 amplifier typically offers 19.6dB gain, +32dBm OIP3 and 1.3dB noise figure, while drawing 68mA current from a +4.2V power supply. 

The QPL9098 adopts a high-performance E-pHEMT process for internal matching, and only four external components are required to operate with a single positive power supply: an external RF choke coil and blocking/bypass capacitors. The QPL9098 low-noise amplifier includes an internal active bias to maintain high performance over temperature. 

The QPL9098 has been optimized for the 4.0 - 6.0 GHz frequency band and is suitable for wireless infrastructure. The QPL9098 is packaged in a 2 x 2. mm DFN. 

Product features

 

• 4.0 - 6.0 GHz operating bandwidth 

LNA with integrated bypass mode 

The ability to shut down the LNA and the bypass mode 

• Extremely low noise, 1.3 dB per gigahertz at 5.0 MHz 

5.5 GHz, gain 19.6 dB (gigahertz) 

Output IP3 of +32 dBm in LNA mode 

+40 dBm output IP3 in bypass mode 

Application program

 

Base station receiver 

Repeater/DAS 

Tower-type amplifier 

• Mobile infrastructure 

General Wireless